REPAIR TO JOINERY, FLOORING, PLASTERING, INTERNAL WATER SUPPLY AND OTHER BUILDING ITEMS TO OFFRS ACCN AND MESSES AT KANJOLI LINE

Amount

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed by Engineer in Charge

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed by Engineer in Charge

Taking down shutter of any description area exc 1 sqm and n. exe 2 sqm complete all as specified and as directed by Engineer in Charge

S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and plywood face panels free from twist or wrap in plane, both face is covered with decorative face venner with Intenal wooden frame lipping not less than 50 mm complete all as specified and as directed by Engineer in Charge

S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered plywood face panels free from twist or wrap in plane, complete all as specified and directed

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.diveded in squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in clause 8.24(a) SSR Part I. complete all as specified and as directed by Engineer in Charge

S&F 30 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified 8.24(b) in SSR Part I. complete all as specified and as directed by Engineer in Charge

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165 complete all as specified and as directed by Engineer in Charge

S&F for 2nd Class hard wood wrought plain fillets square, rectangular or triangular in section nec 3 sqcm fixed nails complete all as specified and as directed by Engineer in Charge

S&F for 0.56 mm thick aluminium alloy sheeting fixed with screw on door shutter complete all as specified and as directed by Engineer in Charge

S & F for Solid PVC Door Frame of the size 50 x 47mm made out of 5mm PVC sheet. The door profiles are to be reinforced with 19x19mm M.S Square tube. EPDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and joined by inserting 2nos. of 150mm long brackets of 15x15mm M.S. square tube inside the 19mm x 19mm M.S. square tube ands suitably screwed. all as specified and directed.

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed by Engineer-in-charge.Note :- (i) Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic.(ii) The PVC doors shall be fixed as per manufacturer's instructions and as directed by Engineer-in-charge.

S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and as directed by Engineer in Charge

S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified and as directed by Engineer in Charge

M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer.

Labour only for Resecuring Without taking down. Chowkat or frame not exc. 1.50 sqm each complete all as specified and as directed by Engineer in Charge

All as item No 18 above but exc. 1.50 sqm & n.exc. 4.00 sqm each complete all as specified and as directed by Engineer in Charge

All as item No 18 above but with shutters without taking of shutters from the frame area n.exc. 1.50 sqm each. complete all as specified and as directed by Engineer in Charge

All as per item, No 18 above but area Exc 1.50 sqm & n.exc. 4.0 sqm each complete all as specified and as directed by Engineer in Charge

Labour only for Re-securing or easing and adjusting, without taking down door Shutter of any description and size. complete all as specified and as directed by Engineer in Charge

All as per item No 22 above but Window shutter complete all as specified and as directed by Engineer in Charge

Labour only for Taking down door shutter of any description & size and refixing in the same opening after necessary repair required for smooth functioning. complete all as specified and as directed by Engineer in Charge

All as per item No 24 above but Window shutter complete all as specified and as directed by Engineer in Charge

Labour only for fixing in repair 2nd class HW stopper/cleats etc article n.exc 200 cu cm each. complete all as specified and as directed by Engineer in Charge

Supply only 2nd class HW small fittings such as brackets of any type, shaped door and window stops and the like n.exc 200 Cu Cm each complete all as specified and as directed by Engineer in Charge

S & F repair 150mm mild steel (Helical door spring) ordinary spring including with necessary welding work complete all as specified and as directed by Engineer in Charge

Repairing of existing aluminium door single leafexc 1.00 Sqm but nexc 2.0 sqm including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate complete all as specified and as directed by Engineer in Charge

ditto all as per Srl item No 29 above but door shutter without Floor Spring fixed on Hinge complete all as specified and as directed by Engineer in Charge

Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item complete all as specified and as directed by Engineer in Charge

Ditto all as above item no 31 but door shutterbut nexc 1.00 sqm complete all as specified and as directed by Engineer in Charge

Ditto all as above item no 31 but exc 2.0 Sqm and nexc 4.0 Sqm each complete all as specified and as directed by Engineer in Charge

Supply Only neosprene rubber beading suitable for aluminium door / window panels complete all as specified and as directed by Engineer in Charge

Supply Only Aluminium alloy Hinges 100 mm complete all as specified and as directed by Engineer in Charge

Supply only 125 mm Aluminium alloy Handle complete all as specified and as directed by Engineer in Charge

Supply only Floor spring for aluminum door shutter exc 1.0 m in width Make Sandhu or equivalent complete all as specified and as directed by Engineer in Charge

Taking Down Aluminium frame nexc 1.50 Sqm and resecuring all member of frame any shape or size with aluminium cleat or straight pieces nexc 75 mm each , resecuring complete frame to opening with required size of PVC plug and Screw not less than 100 mm complete all as specified

Ditto all as per Srl item No 38 above but exc 1.5 Sqm and nexc 4.0 Sqm each complete all as specified and as directed by Engineer in Charge

S&F EPDM rubber strip of width 2 cm suitable for 1mm to 2 mm gap , fixed with adhesive like Fevicol pasting alongwith blue tag type nails complete all as specified and as directed by Engineer in Charge

S&F Aluminium Door seal of overal size 42 mm having nylon brush of 20 mm fixed on aluminium body strip of 22 mm, fixed with screw on Aluminium door, wooden shutters or PVC shutters complete all as specified and as directed by Engineer in Charge

Supply only 12 mm thick particle board grade 2 quality, interior grade, prepainted finished decorative type both faces, complete all as specified and as directed by Engineer in Charge

S&F for Rubber door seal of overall size 35 mm fixed screw on wooden or PVC Shutters complete all as specified and as directed by Engineer in Charge

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed by Engineer in Charge

All as per item No 44 here-in-before but, goverining pivot made of heavy duty mild steel fixed complete all as specified and as directed by Engineer in Charge

S&F in repairs aluminium anodised door handle circular type 120 mm dia fixed to aluminium door frame complete all as specified and as directed by Engineer in Charge

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engineer in Charge

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and as directed by Engineer in Charge

S&F for Aluminium (die cast ) body door closer hudraulically operated regulated, designation No.1 universal type, suitable for door shutter of width upto 700 mm, and of wt not more than 35 Kg each complete all as specified and as directed by Engineer in Charge

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and as directed by Engineer in Charge

S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete all as specified and as directed by Engineer in Charge

Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty, glazing clips etc nexc 0.5 Sqm each pane

S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty , glazing clips n.exc 0.5 Sqm each pane

S&f for 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge

S&F for 4.80 mm thick sheet glass with solar control film 25 micron reflective type sticked to glass pane ,odinary qulity and glazing with neosprene beading exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer in Charge

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer in Charge

Dismantling ceiling frame work of any description and arrange ment with complete supporting members complete all as specified and as directed by Engineer in Charge

S&F GI snap grid frame work of size 600 x 600 mm for false ceiling including necessary notching. The snap grid shall consist of GI Main Tee and Cross Tee of size 35 x 25 x 0.7 mm, Main Tee suspended from the soffit @ 1200mm c/c with level clips, Cross Tee inserted/fixed into the slots of main T @ 600 mm to form a grid. The snap grid (main/cross tee section) shall be supported at ends all along the wall with GI angle of size 25 x 25 x 0.7 mm fixed to wall with suitable arrangement, fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of GI as per specification complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick Everest designer E-Board fixed or laid/inserted to timber/GI/Aluminium ceiling frame work with screws complete all as directed by Engr-in-Charge

S/F in repair existing pattern EWC sheet cover for Integrated EWC of Make Somany /Paryware fixed with PVC Srew aongwith arrangements for smooth operation complete all as specified and as directed by Engineer in Charge

S&F in gypsum board not less than 6-7mm thick of size (595x595mm) both side PVC coated with one side decorated pattern complete all as specified and as directed by Engineer in Charge

Ditto above Item No 62 but fixing only

M&L in repair POP moulding of any pattern as approved on site n exc. 10 cm girth finish even & Smooth with necessary rubbing with sand paper and final c finish with two coat oil bound distemper complete all as specified and as directed by Engineer in Charge

M&L in repair POP moulding of any pattern as approved on site exc. 10 but n exc. 20cm girth finish even & Smooth with necessary rubbing with sand paper and final c finish with two coat oil bound distemper complete all as specified and as directed by Engineer in Charge

M&L in Repair for removing old deteriorated finishes on ceiling by burning /grinding on old sand stone surface and finish even & smooth with rubbing by sand paper, filling all joints lime mortar with adhesive & complete sealed using colour pigment to match with existing sand stone surface (including complete scaffolding and cleaning all surrounding ) complete all as specified and as directed by Engineer in Charge

M&L in Repair for removing old deteriorated finishes on floor & wall by burning /grinding on old sand stone surface and finish even & smooth with rubbing by sand paper, filling all joints lime mortar with adhesive & complete sealed using colour pigment to match with existing sand stone surface ( cleaning all surrounding ) complete all as specified and as directed by Engineer in Charge

M&L for complete removing old painting on wall stone surfaces and grinding, scrubbing & rubbing for smooth sand stone surface after filling joints with lime mortor with adhesive and sealed completely using colour pigment to match with stone surfaces , cleaning all dust etc completely surronding area complete all as specified and as directed by Engineer in Charge

S and F in repair lithium battery for sensor as per existing size, dimension (make Paryware) complete all as specified and as directed by Engineer in Charge

M& L for ginding old kota stone surfaces of flooring and riser and Srubbing & rubbing for smooth surfaces complete all as specified and as directed by Engineer in Charge

Taking up or down the existing serviceable GI steel tubing of 15 mm bore and connection ,including cleaning and refixing old steel tubing and connection new or old position ( walls,ceiling,floor,trenches etc) complete all as specified and as directed by Engineer in Charge

Ditto all as per Srl item No 72 above but 20 mm bore

Ditto all as per Srl item No 72 above but 25 mm bore

Dismantling and taking up or down the existing unserviceable GI pipe of dia 15 mm bore and S&F for new galvanised steel water rubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer in Charge

Ditto all as per Srl item No 74 above but 20 mm bore

Ditto all as per Srl item No 74 above but 25 mm bore

Dismantling and taking up or down the existing unserviceable GI pipe 15 mm bore with all fittings complete to walls and ceilings or laid in floors and removal to store

S&F for 20 mm outer dia CPVC pipes SDR 13.5 pipes & plain cpvc SDR11 fittings on walls /ceiling or laying in floors complete all as specified complete all as specified and as directed by Engineer in Charge

Extra over for 20 mm outer dia of CPVC following special fittings :- (a) Brass elbow

Brass elbow (3/4 x 1/2)

Brass Tee

Male brass threaded adapter

Male brass threaded adapter

Dismantling 1000 ltr water tank and M&L new 1000 ltr ISI marked triple layred white colour with thraded lid rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all as specified in SSR part-I complete all as specified and as directed by Engineer in Charge

Dismantling 500 ltr water tank and M&L new 500 ltr ISI marked white colour with thraded lid three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve all as specified in ssr part-I complete all as specified and as directed by Engineer in Charge

M & L for Mild steel hollow sections uto 3.25 mm wall thickness,fixed independently, without connecting plates etc cut to length (cut to ordinary length ie within 20 mm of the length indicated) complete all as specified and as directed by Engineer in Charge

S&F 2 mm dia Mild steel wire 40x40 mm welded mesh, made up into mattress or cages,lapped wired and laid in position including closing after filling. complete all as specified and as directed by Engineer in Charge

Demolition cement Concrete (unreinforced) of any description and any position not otherwise specifically provided for complete all as specified and as directed by Engineer in Charge

M&L for providing Square/Rectangular,raised platform of hight 20 cm below the tank and base dia min 100 MM projected by the external dia all around of tank for pvc cylendrical tank of capicity 500/1000 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc. complete all as specified and as directed by Engineer in Charge

Disconnecting existing tanks carefully, setting aside (or lowering if required) for repairs, cleaning, etc. and hositing if required reconnecting and re-fixing in position capicity exc 250 ltr &nexc 500 litre inculding rexing of float valve, gate valve, nipple socket all necessary fixures with m &l , making functional without overflow (Cleaning repairing etc. measured and paid separately). complete all as specified and as directed by Engineer in Charge

Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.capicity exc 250 ltr &nexc 500 litre with gunny bags ,sand cleaning with fresh water and bleaching powder and marking date of cleaning with ca no all as specified by EIC

Supply only PTMT ball valve of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 210 grams for ball only) complete all as specified and as directed by Engineer in Charge

Supply only PTMT ball valve of 15 mm bore high pressure of PTMT with epoxy coated aluminium rod & high denisty plastic ball screwed for iron pipe (minimum wt 142 grams for ball only) complete all as specified and as directed by Engineer in Charge

S&F in repair PVC cover htread type for PVC Water tank 500ltr capacity and fixed with screw with tank wall. complete all as specified and as directed by Engineer in Charge

Demolition & breaking up drain pipes AC, (Salt glazed ware, AC or Reinforced concrete) set in CM Internal dia of pipe 100 mm complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) pipe single socketed, in any length with rubber ring joints including clamps to walls ,laid in trench or in walls, type 'B' ISI marked of 110 mm bore. complete all as specified and as directed by Engineer in Charge

Ditto all above for 110 mm bore but fixing only complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) pipe single socketed, in any length with rubber ring joints including clamps to walls,laid in trench or in floor, type 'B' ISI marked of 75 mm bore. complete all as specified and as directed by Engineer in Charge

Ditto item No 99 above for 75 mm bore but fixing only complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) bend of 110 mm bore of any radious complete all as specified and as directed by Engineer in Charge

S&F UPVC (SWR) bend of 75mm bore with access door ofany radious complete all as specified and as directed by Engineer in Charge

S&F sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1215mm x 460mm, bowl size 410mm x 330mm x 190mm including waste pipe of polythelene of low or high density or pvc 32 mm dia &waste coupling brass chromium plated for 32 mm bore with long screwed shank and fly nuts including making holes in any type of wall for brackets and fixed in cm 1:3 or pcc 1:2:4 type B0 complete fixed in repair .Make of sink -comet/neelkamal/hindustan/devidayal/ kitchenqueen/ jaquar complete all as specified and as directed by Engineer in Charge

Dismantling of old U/S grating of any description or size and S&F new CP cockroch trap grating 75/100/125 mm dia of weight not less than 40 gm for floor trap/Nahani trap.

S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.15 mm and fixed with tinned tack or galvanised wire staple with rivets etc complete all as specified and as directed by Engineer in Charge

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in Charge

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified and as directed by Engineer in Charge

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' all as specified .

S&F rolled mild steel Hollow section square or rectangular of wall thickness 3.25 to 4.25 mm thick, work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' all as specified .

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 all as specified and directed by Engineer-in-Charge.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' all as specified and directed by EIC.

Pre painted galvatume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm th, sheeting of any colour having strength of 550 mpa as in roof covering etc complete all as specified and as directed by Engineer in Charge

S&F pre painted galvatume aluminium zinc coating GI based Tiled Roofing steel sheet base metal 0.45mm thick, Rib height of 28 mm, pitch 200 mm with 16 mm step depth with 35 micron painting, Metallic coating 150 gram per square meter overall weighing 4.9 Kg per square meter of any colour having tensile strength of G300 Mpa as in roof covering fixed with self tapping screw with washer or L type or J type or cranked hook bolts all as specified (Make Tata Blue Scope Steel or equivalent)

M&L 10 mm thick hollow section polycorbonate sheet suppoerted with ribs any colour shade including notched aluminium strip not less than 32 mm wide both edges and with packed with rubber gasket at joints, finaly sealed with silicon gel complete all as specified and as directed by Engineer in Charge

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified and as directed by Engineer in Charge

S&F asbestos cement two pieces adjustable serrated ridge, 6 mm thick for corrugated or semi-corrugated sheets with 'L' or 'J' hooks complete all as specified.

S&F asbestos cement two pieces adjustable Plain wing ridge, 6 mm thick for corrugated or semi-corrugated sheets complete all as specified.

Fixing only asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified.

Fixing only two pieces adjustable serrated ridge for asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified.

Fixing only two pieces adjustable Plain wing ridge asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with ‘L’ hooks complete all as specified.

S&F for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC ange fixed with solvent cement complete all as specified as manufacturer's Instructions

Dismantling boarding of any description, fixed in any position with nails complete all as specified and as directed by Engineer in Charge

Dismantling timber fillets ,rails, post, rafters, purlins etc under 40 sqcm fixed unframed work complete all as specified and as directed by Engineer in Charge

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including making good surfaces

S&F for IInd class hardwood plain fillets wrought square, rectangular or triangular in section area exc 6 Sqcm nut nexc 13 sqcm fixed with nails complete all as specified and as directed by Engineer in Charge

M&L for 18 mm thick PVC boarding shutters of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern complete all as specified and as directed by Engineer in Charge

M&L for 18 mm thick PVC boarding shelves of density exc 550 Kg per Cum but nexc 600 Kg per Cum one side decorative lamination & other sidebalancing lamination sheet fixed with brackets, screws etc, Panels shall be fabricated using adhesive and screws wherever required, Supported for three sides with 18 mm x 18 mm PVC Ply fixed with Screw all the edges shall be coverd with 18 mm x 1 mm thick edge bending tape or 90 degree edge bend finish as per manufactrure specification or approved pattern

S&F for stainless steel auto soft close concealed hinges suitable for full Overlay cupboard shutters with self tapping stanless steel screw (Make Ozone series OEC451-A2S-SC or equivalent make of Hafle India or Sunshine India)

S&F for stainless steel auto soft close concealed hinges suitable for Half Overlay cupboard shutters with self tapping stanless steel screw (Make Ozone series OEC451-B2S-SC or equivalent make of Hafle India or Sunshine India)

S&F for stainless steel auto soft close concealed hinges suitable for Inset cupboard shutters with self tapping stanless steel screw (Make Ozone series OEC451-C2S-SC or equivalent make of Hafle India or Sunshine India)

S&F for stainless steel 125 mm handle not less than 12 mm dia suitable for cupboard shutters with self tapping stanless steel screw (Make Ozonon, Hafle India or Sunshine India)

S&F for Zinc coated full extension ball bearing slides 550 mm fixed with12 nos SS-304 screws (Make Ozone series OBBS-4511 550 mm - 22" Zinc or equivalent make of Hafle India or Sunshine India)

S&F for Zinc coated Undermount soft close slides 550 mm fixed with12 nos SS-304 screws (Make Ozone series OE- UMS- SC- FE 550 mm - 22" Zinc or equivalent make of Hafle India or Sunshine India)

S&F for cross railing (Inter Dividing Gallary Rail) with Horizontal / Traverse rail , T connector, connecting clips, End cap for drawer complete all as specified and as directed by Engineer in Charge

S&F for horizontal & Vertical Dividing Panel in conjuction with glass clips for drawer complete all as specified and as directed by Engineer in Charge

S&F for stainless steel cutlery tray of size 84x168 mm for cutlery organizer complete all as specified and as directed by Engineer in Charge (Make - Ozone OK-CT-SS-84x168 sss or equivalent Hafle India or Sunshine India)

S&F for stainless steel cutlery tray of size 84x252 mm for cutlery organizer complete all as specified and as directed by Engineer in Charge (Make - Ozone OK-CT-SS-84x252 sss or equivalent Hafle India or Sunshine India)

S&F for stainless steel cutlery tray of size 84x305 mm for cutlery organizer complete all as specified and as directed by Engineer in Charge (Make - Ozone OK-CT-SS-84x305 sss or equivalent Hafle India or Sunshine India)

S&F stainless steel Adjustable & Expandable (Min close position 168mm high and 262 mm width ) Dish organizer with side plate to support complete all as specified and as directed by Engineer in Charge (Make - Ozone OK-APH-SS- GR or equivalent Hafle India or Sunshine India)

S&F for Stainless steel plate rack of approved manufactered with 0.63 mm stainless steel plate of overall size exc 0.75 Sqm but nexc 1.0 Sqm complete including hanging arrangement with wall complete all as specified and as directed by Engineer in Charge

S&F for solid PVC wall lining consisting of 5 mm thick wood grain printed on prelam PVC sheet used inclusive of solvent cement and fixing at ste on wall as per specification and drg complete all as specified and as directed by Engineer in Charge

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and as directed by Engineer in Charge

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. complete all as specified and as directed by Engineer in Charge

M&L 25 mm thick cement concrete type B-0. 1:2:4 (12.5 mm graded aggregate) stone aggregate a in sub base for stone flooring complete all as specified and as directed by Engineer in Charge

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer in Charge

All as per item No 141 but thckness 12-15 mm above as in skirting,dado,riser of step etc. complete all as specified and as directed by Engineer in Charge

M&L Glazed ceramic in patches coloured/printed tiles in vertical surface of size 300x200x7mm/450x350x7mm thick set and jointed in neat cement slurry, over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for 40 mm thick PCC flooring 1:2:4 type B-1 using 20 mm graded stone aggregate, finished even and smooth using extra cement complete all as specified and as directed by Engineer in Charge

Supply only 38 mm x 3 mm glass dividing strip as per pattern approved complete all as specified and as directed by Engineer in Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer in Charge

M&L for 15 mm screed bedding in CM 1:4 on vertical surface over brick or concrete surfaces for laying finishes complete all as specified and as directed by Engineer in Charge

M&L for 10 mm screed bedding in CM 1:4 on shelves surface over brick or concrete surfaces for laying finishes complete all as specified and as directed by Engineer in Charge

M&L for 20 mm screed bedding in CM 1:6 for flooring surface over brick or concrete surfaces for laying finishes complete all as specified and as directed by Engineer in Charge

M&L for Light shade Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Dark shade Vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Joint free White shade Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Joint free Coloured shade Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer in Charge

M&L for White/ Coloured shade of Glazed ceramic tile in vertical surface exc 0.15 Sqm but nexc 0.25 Sqm each tile of 7-8 mm thick set and jointed in neat cement slurry and pointed in white coloured cement to match complete all as specified and as directed by Engineer in Charge

M&L for Highlighter designer pattern of Glazed ceramic tile in vertical surface exc 0.15 Sqm but nexc 0.25 Sqm each tile of 7-8 mm thick set and jointed in neat cement slurry and pointed in white coloured cement to match complete all as specified and as directed by Engineer in Charge

M&L for 15 -18 mm thick Granite (of any type) work in jambs, steps , pillars, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Rounding to edges of stone slabs one edge such as step, cooking platform and other similar situation complete all as specified and as directed by Engineer in Charge

M&L for cutting chases , pinning in , making good to facing where required and pointing in CM 1:3 to end or edges for concealed water tubing exc 10 cm but nexc 20 cm girth complete all as specified and as directed by Engineer in Charge

S&F for in repair Brass Chromium plated single lever basin mixture without pop wastewith 450 mm long braided hoses complete all specified. (Make;- ESSCO cat part no APR 10101B or equivalent)

S&F for in repair Brass Chromium plated pillar cock with 450 mm long braided hoses complete all specified. (Make;- ESSCO cat part no APR 10101 or equivalent)

S&F for in repair Brass Chromium plated Wall mixture 3 - in - 1 system with provision of both hand shower & overhead shower with 115 mm long bend pipe incl connecting leg and wall flange complete all specified. (Make;- ESSCO cat part no APR 101281 or equivalent)

S&F for in repair Brass Chromium plated with swing spout (wall mounted model) sink mixture incl connecting leg and wall flange complete all specified. (Make;- ESSCO cat part no APR 101309 N or equivalent)

S&F for in repair Brass Chromium plated two way Bib cock with wall flange complete all specified. (Make;- ESSCO cat part no APR 101041 or equivalent)

S&F for in repair Brass Chromium plated long body Bib cock with wall flange complete all specified. (Make;- ESSCO cat part no APR 101017 or equivalent)

S&F for in repair Brass Chromium plated Angular stop cock with wall flange complete all specified. (Make;- ESSCO cat part no APR 101053 or equivalent)

S&F for in repair Brass Chromium plated aspire bath tub spout with button attachment for hand shower incl connecting leg and wall flange complete all specified. (Make;- ESSCO cat part no SPE 101463 or equivalent)

S&F for in repair Brass Chromium plated Jet spray wit 1 metre PVC tube covered SS covered complete all specified. (Make;- ESSCO cat part no SPE 101463 or equivalent)

S&F for in repair Brass Chromium plated Bottle trap with fully casted body 32 mm bor, 300mm and 125 mm long connecting pipe and wall flange complete all specified. (Make;- ESSCO cat part no ALE-773A2300 x 125 or equivalent)

S&F for in repair Brass Chromium plated Health faucet (ABS body) with 1.2 m long PVC tube covered SS covered and wall flange complete all specified. (Make;- ESSCO cat part no ALE E55-583 or equivalent)

S&F for in repair Brass Chromium plated overhead shower 80 mm square shape single flow (ABS body chromium plated with grey face plate) with 450 mm long coonecting pipe with rubbit cleaning systemand wall flange complete all specified. (Make;- ESSCO cat or equivalent)

S&F for in repair Brass Chromium plated Hand shower multiflow 80 mm round shape with 1.50 m long spiro chrome flex tube & wall bracket onecting pipe with rubbit cleaning systemand wall flange complete all specified. (Make;- ESSCO cat part no SAE 1931SH555 or equivalent)

S&F for in repair Brass Chromium plated Towel railof grip 600 mm complete all specified. (Make;- ESSCO cat part no AEC 1111 or equivalent)

S&F for in repair Brass Chromium plated Soap dish with polycorbonate plate complete all specified. (Make;- ESSCO cat part no AEC 1133 or equivalent)

S&F for in repair Brass Chromium plated Tambler Holder complete all specified. (Make;- ESSCO cat part no AEC 1141 or equivalent)

S&F in repair viterous china bowl for couple closet WC with PP soft close seat cover, Hinges fixing accessories and accessories set , 375mm x 665mm x 755 mmof S trap 110 mmalongwith cistern complete all as specified(Make;- ESSCO combination cat part no MVS-WHT-75155 and MVS-WHT-7515N,SS or equivalent)

S&F in repair viterous china Table top basin with CP waste coupling , 435mm x 375mm x 130 mm complete all as specified(Make;- ESSCO cat part no ECS-WHT-933 or equivalent)

S&F in repair viterous china Counter top basin Oval shape with CP waste coupling , 530mm x 445 mm x 195 mm complete all as specified(Make;- ESSCO cat part no ECS-WHT-601 or equivalent)

S&F in repair viterous china Wall hung basin with CP waste coupling and ange iron bracket & screw, 515mm x 415 mm x 195 mm with combination of pedastal complete all as specified(Make;- ESSCO combination cat part no ECS-WHT-805 and ECS-WHT-301 or equivalent)

S&F in repair PP normal soft close slim seat cover suitable for WC complete all as specified and as directed by Engineer in Charge (Make;- ESSCO or equivalent)

S&F in repair PP normal close slim seat cover suitable for WC complete all as specified and as directed by Engineer in Charge (Make;- ESSCO or equivalent)

S&F in repair smart single flush wall hung cistern with drainage L bend , pipe with gasket & Installation Kit suitable for EWC /Orissa Pattern WC Asian Pattern complete all as specified and as directed by Engineer in Charge (Make;- ESSCO cat pt no WHE-WHT-183 L or equivalent)

M&L for Varnishing by under coating & finishing coat with synthetic varnish, after sizing, fillaer coat thin varnish and oil staining after preparation of old treated surfaces of any description over 10 cm width or girth complete all as specified and as directed by Engineer in Charge

M&L for painting with two coats of plastic mulsion paint over primer paints after preparing old painted Brick , stone, concrete, asbestos cement or plastered surfaces complete all as specified and as directed by Engineer in Charge

M & L Preparation of old decorated plastered or undecorated plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Wall Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work,complete all as specified and as directed by Engineer-in-Charge.

M&L Complete removal of existing treatment,washing, rubbing down and stopping of distemperd and painted surface of old surface by Electric Rotary grinder including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorscent salts and trading oil and greasy spots of Ceiling Surface removing of nails, making good holes , cracks etc , cleaning of floors , glasses, joinery of drops and splashes incl all arrangement necessary for execution of work,complete all as specified and as directed by Engineer-in-Charge.

M&L for including sand paper gentle rubbing to obtain smooth surfaces and applying Two coats of oil bound distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented akali resistant priming paint , over 1mm thick wall care putty on Wall Surface including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

M&L for sand paper gentle rubbing to obtain smooth surfaces and applying Two coats of oil bound distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented akali resistant priming paint and 1mm thick wall care putty (Birla Whie or equivalent) on Ceiling Surface including all necessary arrangement for execution of work ,complete all as specified and as directed by Engineer-in-Charge.

M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smmoth surfaces, including all necessary arrangement for execution of work and applying two coats of Cement Base Paint using hand roller of over one coat of water based white pigmented akali resistant priming paint for external wall, complete all as specified and as directed by Engineer-in-Charge.

M&L for thourughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying Two coats of Exterior Plastic plastic emulsion paint using hand roller over one coat of water based white pigmented akali resistant priming paint for external wall over 1mm thick white cement putty on external Wall Surface, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorative concrete, plastered/ un-plastered surface of wall including cornices, pilasters etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and prepare the surface and applying one coat of cement based paint using hand roller of approved colour complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of old distempered surface of wall including cornices etc by brooming down, steel wire brushing ,scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots removing nails and filling small holes by putty and applying one coat of distemper oil emulsion using hand roller white or tinted complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per Srl item No 192 here in above but applying one coat of distemper oil emulsion using hand roller white or tinted on ceiling complete all as specified and as directed by Engineer-in-Charge

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed by Engineer-in-Charge.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described not exc 10 CM width or girth including preparation of surface including all preparatory work complete all as specified

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work / stone masonary or cement concrete external surfaces of wall /chajjas/roof protection etc including finishing the surface even and fair complete all as specified and as directed by Engineer-in-Charge

M&L for Rendering 15 mm thick in patches nexc 3.00 Sqm each, cement and sand mortar 1:4 on fair faces of brick work / stone masonary or cement concrete surfaces of wall /chajjas/roof protecjion etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

M & L Preparation of new decorated plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer on 1mm thick white putty, with hand roller complete all as specified and as directed by Engr-in-Charge.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer with hand roller complete all as specified.

Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

PD GUPTA AND COMPANY

M/S MAKHIJA TRADERS