PROVN OF AREA LIGHTING AND LANDSCAPE LIGHTING SYSTEM AROUND CGDA MAIN BUILDING UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

Supply and fix LED Fixture of Garden light Bollard 10-12 Watt made out of aluminium pressure die cast light fixture size 385x225mm height 900mm(min) with polycarbonate diffuser, silicon filed complete. Fixture shall be provided with cast aluminium heat sinks in upper part of fixture, metallic PCB mounted on it and powered by high power LED’s & external driver. Fixture shall be mounted on aluminium column. The column shall be minimum 3mm thick provided with aluminium and integral service connection box including, connector & cover. The complete bollard shall be painted with harvest green colour over a coat of primer complete all as specified and directed. Makes:- (i) HI-LITE CAT NO-HL-143. (ii) NERI BOLLARD LARS CODE NO 2977.101xx. (iii) UNILAMP CAT No-CHARISHMA1 ROUND BOLLARD- Code No 7156-0-3-887-xx.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm, 2 core, 1100 Volts grade complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed.

Excavation in trenches in soft and loose soil n.exc 1.5 mtr wide and not exc. 1.5 mtr depth for laying and taking out of electric power cable and getting out complete all as specified and directed.

Material & labour river washed and screened dry sand for filling under and above the under ground cable for cushioning of cables etc.complete all as specified and directed.

Supply & laying sub class B bricks having minimum compressive strenth 75 Kg/sqm laid in trenches for cable protection etc complete all as directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material not exceeding 50 mtr away and depositing where directed at a level n. exc 1.5 mtr above the starting point .

Supply, installation, testing & commissioning LT distribution panel cubical type of minimum external dimensions of 1050x800x250mm, outdoor type, self stand on angle iron frame upto 500mm height, dust & vermin proof, 415 V, 3 Phase, 4 wire 50 HZ with common copper busbar 300 Amps, openable in front side with locking arrangement made out of CRCA sheet 3mm thick with powder coating seven tank process duly powder coated & with danger notice plate on front door suitable for and inclusive of following accessories complete all as specified and directed:- Incoming:- (a) MCCB FP, 415 Volt, 63 Amp, 36 KA - 01 No Make:- Legrand Cat Part No :- 4200 93 or equivalent model of ABB/ Siemens/ Schnieder. Out going:- (a) MCCB TP, 415 Volt, 40 Amps, 16 KA - 02 Nos, Make :- Legrand cat part No :- 4200 02 or equivalent model of ABB/ Siemens/ Schnieder (b) Contactor 3 pole with 2 No + 2 NC Aux contact for AC circuit with AC 240 V coil voltage type ML2, 32 Amps, 415 V - 02 Nos Make- L&T Cat Part No. SS90701 or equivalent Model of Make- Siemens/ Schnieder. (c) Timer switch, Make :- GIC ( L & T) cat part No J-648 B-1 or equivalent Model of Make- Siemens/ Schnieder - 02 Nos Note:- Quoted rates shall deemed to be inclusive of grouting/ fixing of panel in PCC 1:3:6 type C2 and PCC block masonry with PCC block of mix 1:4:8 & plastering 10mm thick in cement mortar 1:6 complete all as specified and directed.

M&L Earthing complete with galvanised Iron earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of the plate not less than 1.5 metre below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 25X4 mm GI earth strip electrode welded and revetted to earth plate up to a distance of 7.5 metre long, GI earth strip encased in and including 40mm bore GI light grade pipe, with 20mm bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, MS funnel with wire mesh fixed on water pipe including excavation earth work, Provn of PCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed.

S&F 25 x 4 mm GI strip with epoxy insulators and fixing screws etc for earth continuity conductors to test point terminal complete all as specified and as directed.

M/s Adhikari construction co.

M/S ANIL KUMAR

Saini Enterprises

Commercial Traders

M/s Navansh Engineers & Consultants