Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC H NO 1237 PANA PAPOSIAN NARELA NORTH WEST DELHI NEW DELHI 110 040 | NEW DELHI | NORTH WEST DELHI | DELHI | 110040 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.8 L+₹7.3 L (37.6%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹31.1 L+₹11.6 L (59.6%)Rejected-Finance | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹33.5 L+₹14.0 L (72.0%)Rejected-Finance | L4 | Rejected-Finance Being not lowest tenderer | |
| 5 | L5₹34.6 L+₹15.1 L (77.7%)Rejected-Finance GROUND FLOOR F 11 PHASE II MAYAPURI WEST DELHI DELHI 110064 | DELHI | WEST DELHI | DELHI | 110064 | L5 | Rejected-Finance Being not lowest tenderer |
| Sl No | Description | Qty | Unit | M/S HARINDER SINGH L1 | M/S Delhi Engineering Co. L4 | MOHIT ENTERPRISES L2 | AMIT ENTERPRISES L5 | Mani Control System L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down the existing old unsv LT panel / feeder pillar box of any type comprising of MCCB & switch fuse unit of any capacity and size including aluminium bus bar, ammeters, voltmeters etc. after disconnecting all cable connections and removing from site complete all as specified and directed by Engr-in-charge. | 8 | Each Job | 3 ₹24 Lowest | 500 ₹4,000 | 99 ₹792 | 500 ₹4,000 | 500 ₹4,000 |
| 2.00 | S&F of LT Panel board outdoor type, double door, fabricated made of MS / CRCA sheet 3.15 mm thick with MS angle frame of size 40 X 40 x 6 mm with locking arrangements slanting roof and size of LT panel / feeder pillar box with suitable size including 04 Nos legs with necessary PCC work of suitable size of PCC 1:2:4 including necessary insulators and 04 Nos of copper bus bar of size 30 mm X 5 mm capacity, provision of inlet and outlet cable glands and earth connection lead etc. complete and connection of all incoming and outgoing cable using aluminium terminal sockets / lugs duly crimpled and necessary two coats of paint with approved make and colour an grade of first quality synthetic enamel paint over a coat of red oxide primer including necessary preparation of surfaces and the panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing / wall mounting type suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size including MS angle frame of size 40 X 40 X 5 mm structure at bottom, and with including the following accessories :- | 1 | Each Job | 85,999 ₹85,999 Lowest | 1,50,000 ₹1,50,000 | 1,39,999.99 ₹1,39,999.99 | 1,49,000 ₹1,49,000 | 1,30,000 ₹1,30,000 |
| 2.01INCOMING : (i) MCCB, AC 415 volts, adjustable thermal & adjustable magnetic setting, 4 pole current rating 400 Amps, breaking capacity 36 KA = 01 No (ii) 4 strip copper bus bar of size 40x10mm with specific colour (R,Y,B) insulation - 01 set (iii) Metering panel comprising, voltmeter and ammeter, digital type with selector switches CTs, control fused and indicating lamps. OUTGOING : (i) MCCB, AC 415 volts, 4 pole current rating 200 Amps, breaking capacity 16 KA = 03 No’s. (ii) MCCB, AC 415 volts, 4 pole current rating 40 Amps, breaking capacity 10 KA = 02 No’s. (iii) Spare blanking way for one No extra outgoing MCCB = 02 Nos (iv) Digital Voltmeter 0-500 Volts - 01 Nos. (v) Digital Ammeter 04-400 Amps - 01 Nos. (vi) Indicator lamps Red, Yellow & Blue. (vii) Complete wiring of the panel board. (viii) CT ratio 400/5 Amps. | ||||||||
| 3.00 | S&F of LT Panel board outdoor type, double door, fabricated made of MS / CRCA sheet 3.15 mm thick with MS angle frame of size 40 X 40 x 6 mm with locking arrangements slanting roof and size of LT panel / feeder pillar box with suitable size including 04 Nos legs with necessary PCC work of suitable size of PCC 1:2:4 including necessary insulators and 04 Nos of copper bus bar of size 30 mm X 5 mm capacity, provision of inlet and outlet cable glands and earth connection lead etc. complete and connection of all incoming and outgoing cable using aluminium terminal sockets / lugs duly crimpled and necessary two coats of paint with approved make and colour an grade of first quality synthetic enamel paint over a coat of red oxide primer including necessary preparation of surfaces and the panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing / wall mounting type suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size including MS angle frame of size 40 X 40 X 5 mm structure at bottom, and with including the following accessories :- | 3 | Each Job | 76,999 ₹2,30,997 Lowest | 1,25,000 ₹3,75,000 | 1,19,999.99 ₹3,59,999.97 | 1,49,000 ₹4,47,000 | 1,20,000 ₹3,60,000 |
| 3.01INCOMING : (i) MCCB, AC 415 volts, adjustable thermal & adjustable magnetic setting, 4 pole current rating 300 Amps, breaking capacity 36 kA= 01 No, (ii) 4 strip copper bus bar of size 30 X 5 mm with specific colour (R,Y,B) insulation - 01 set (iii) Metering panel comprising, voltmeter and ammeter, digital type with selector switches CTs, control fused and indicating lamps. OUTGOING : (i) MCCB, AC 415 volts, 4 pole current rating 150 Amps, breaking capacity 36 kA = 03 No’s. (ii) Spare blanking way for one No extra outgoing MCCB = 01 No (iii) Digital Voltmeter 0-500 Volts - 01 Nos. (iv) Digital Ammeter 04-400 Amps - 01 Nos. (v) Indicator lamps Red, Yellow & Blue. (vi) Complete wiring of the panel board. (vii) CT ratio 400/5 Amps. | ||||||||
| 4.00 | S&F of LT Panel board outdoor type, double door, fabricated made of MS / CRCA sheet 3.15 mm thick with MS angle frame of size 40 X 40 x 6 mm with locking arrangements slanting roof and size of LT panel / feeder pillar box with suitable size including 04 Nos legs with necessary PCC work of suitable size of PCC 1:2:4 including necessary insulators and 04 Nos of copper bus bar of size 30 mm X 5 mm capacity, provision of inlet and outlet cable glands and earth connection lead etc. complete and connection of all incoming and outgoing cable using aluminium terminal sockets / lugs duly crimpled and necessary two coats of paint with approved make and colour an grade of first quality synthetic enamel paint over a coat of red oxide primer including necessary preparation of surfaces and the panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing / wall mounting type suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size including MS angle frame of size 40 X 40 X 5 mm structure at bottom, and with including the following accessories :- | 4 | Each Job | 33,500 ₹1,34,000 Lowest | 1,10,000 ₹4,40,000 | 69,999 ₹2,79,996 | 1,55,000 ₹6,20,000 | 1,10,000 ₹4,40,000 |
| 4.01INCOMING : (i) MCCB, AC 415 volts, adjustable thermal & adjustable magnetic setting, 4 pole current rating 160 Amps, breaking capacity 36 kA= 01 No (ii) 4 strip copper bus bar of size 30 X 5 mm with specific colour (R,Y,B) insulation - 01 set (iii) Metering panel comprising, voltmeter and ammeter, digital type with selector switches CTs, control fused and indicating lamps. OUTGOING : (i) MCCB, AC 415 volts, 2 pole current rating 63 Amps, breaking capacity 36 kA= 05 No’s. (ii) Spare blanking way for one No extra outgoing MCCB = 01 No (iii) Digital Voltmeter 0 - 500 Volts - 01 Nos. (iv) Digital Ammeter 04 - 400 Amps - 01 Nos. (v) Indicator lamps Red, Yellow & Blue. (vi) Complete wiring of the panel board. (vii) CT ratio 400/5 Amps. Note for Item ser No. 2, 3 & 4 :- (i) Vertical height of legs shall not be less than 45 cm from top of ground level / PCC Floor Finish. Legs shall be grouted in ground minimum 30 cm I PCC(1:3:6) type C1 (using 20 mm graded crushed stone aggregate) (ii) The Contractor shall produce and get the detailed Drawing (GD) of LT Panel approved rom GE through engineer-in-charge before fabrication and placing the order tothe approved manufacturer (iii) MS Frame work shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer. (iv) All accessories of these items shall be deemed to be included in the quoted rates. | ||||||||
| 5.00 | Excavation in trenches in soft/loose soil, n.exc 1.5 mtr wide and n.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/ foundation of pole and stay etc in complete all as specified and directed by Engr-in-charge. | 191.7 | Cum | 33 ₹6,326.1 Lowest | 150 ₹28,755 | 49 ₹9,393.3 | 100 ₹19,170 | 120 ₹23,004 |
| 6.00 | M&L for sand cushioning in trenches for protection of LT underground cable including watering and consolidation complete all as specified and directed by Engr-in-charge. | 57.51 | Cum | 222 ₹12,767.22 Lowest | 400 ₹23,004 | 699.99 ₹40,256.42 | 777 ₹44,685.27 | 400 ₹23,004 |
| 7.00 | Supply and laying well burnt sub class ‘B’ bricks, locally available of size 23x11.5x7.5 CM (+_8% tolerance) in trenches for protection of underground cable complete all as specified and directed by Engr-in-Charge. | 6,174 | Each | 1 ₹6,174 Lowest | 5 ₹30,870 | 4 ₹24,696 | 7 ₹43,218 | 7 ₹43,218 |
Tender Value
₹34.7 L
EMD Value
₹69,400
Closing Date
2 Feb 2026, 6:00 pmClosed
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
SPL REPAIR REPLACEMENT OF OUTDOOR LT PANELS, MCCBs RELATED UG CABLES AND ALLLIED WORKS AT DOMESTIC AREA, PROVN OF FIRE RETARDANT FALSE PROOF IN AFNET EQUIPMENT ROOM AND LIGHTENING ARRESTOR AT BLDG NO P-118 AND AIR CONDITIONER FOR CERTAIN OFFICERs
2026_MES_748150_1
GE/TKD-61/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI
As per NIT conditions
8 documents required · 8 mandatory
₹0
₹69,400
Yes
12 Aug 2026
12 Jan 2026
4 Feb 2026
12 Jan 2026
2 Feb 2026
26 Jan 2026
Taking down the existing old unsv LT panel / feeder pillar box of any type comprising of MCCB & switch fuse unit of any capacity and size including aluminium bus bar, ammeters, voltmeters etc. after disconnecting all cable connections and removing from site complete all as specified and directed by Engr-in-charge.
S&F of LT Panel board outdoor type, double door, fabricated made of MS / CRCA sheet 3.15 mm thick with MS angle frame of size 40 X 40 x 6 mm with locking arrangements slanting roof and size of LT panel / feeder pillar box with suitable size including 04 Nos legs with necessary PCC work of suitable size of PCC 1:2:4 including necessary insulators and 04 Nos of copper bus bar of size 30 mm X 5 mm capacity, provision of inlet and outlet cable glands and earth connection lead etc. complete and connection of all incoming and outgoing cable using aluminium terminal sockets / lugs duly crimpled and necessary two coats of paint with approved make and colour an grade of first quality synthetic enamel paint over a coat of red oxide primer including necessary preparation of surfaces and the panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing / wall mounting type suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size including MS angle frame of size 40 X 40 X 5 mm structure at bottom, and with including the following accessories :-
S&F of LT Panel board outdoor type, double door, fabricated made of MS / CRCA sheet 3.15 mm thick with MS angle frame of size 40 X 40 x 6 mm with locking arrangements slanting roof and size of LT panel / feeder pillar box with suitable size including 04 Nos legs with necessary PCC work of suitable size of PCC 1:2:4 including necessary insulators and 04 Nos of copper bus bar of size 30 mm X 5 mm capacity, provision of inlet and outlet cable glands and earth connection lead etc. complete and connection of all incoming and outgoing cable using aluminium terminal sockets / lugs duly crimpled and necessary two coats of paint with approved make and colour an grade of first quality synthetic enamel paint over a coat of red oxide primer including necessary preparation of surfaces and the panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing / wall mounting type suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size including MS angle frame of size 40 X 40 X 5 mm structure at bottom, and with including the following accessories :-
S&F of LT Panel board outdoor type, double door, fabricated made of MS / CRCA sheet 3.15 mm thick with MS angle frame of size 40 X 40 x 6 mm with locking arrangements slanting roof and size of LT panel / feeder pillar box with suitable size including 04 Nos legs with necessary PCC work of suitable size of PCC 1:2:4 including necessary insulators and 04 Nos of copper bus bar of size 30 mm X 5 mm capacity, provision of inlet and outlet cable glands and earth connection lead etc. complete and connection of all incoming and outgoing cable using aluminium terminal sockets / lugs duly crimpled and necessary two coats of paint with approved make and colour an grade of first quality synthetic enamel paint over a coat of red oxide primer including necessary preparation of surfaces and the panel should be dust and vermin proof factory fabricated, CPRI approved totally enclosed free standing / wall mounting type suitable for 415 volts, 50 Hz 3 phase 4 wire system complete in all respect and confirming to latest relevant of ISI specifications including necessary connections, inter connections with copper conductor cable of required size including MS angle frame of size 40 X 40 X 5 mm structure at bottom, and with including the following accessories :-
Excavation in trenches in soft/loose soil, n.exc 1.5 mtr wide and n.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/ foundation of pole and stay etc in complete all as specified and directed by Engr-in-charge.
M&L for sand cushioning in trenches for protection of LT underground cable including watering and consolidation complete all as specified and directed by Engr-in-charge.
Supply and laying well burnt sub class ‘B’ bricks, locally available of size 23x11.5x7.5 CM (+_8% tolerance) in trenches for protection of underground cable complete all as specified and directed by Engr-in-Charge.
Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point complete all as specified and directed by Engr-in-Charge.
Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engr-in-Charge.
M&L complete for drilling hole under hard standing /road for laying of pipe for protection of cable etc. by means of manual buckle and without disturbing the top surface and making good the disturbed surface if any complete all as specified and directed by Engr-in-Charge.
Supply and laying in replacement of GI tube light grade 40 mm borecomplete all as specified and directed by Engr-in-Charge.
Supply and laying in replacement of GI tube light grade 80 mm borecomplete all as specified and directed by Engr-in-Charge.
Taking out old serviceable /unserviceable underground cable of any size from excavated trenches /pipes complete all as specified and directed by Engr-in-Charge. Note: Earth work, segregating cable cover measured separately.
Supply laying and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade 4 Sqmm 2 core, cross sectional area complete all as specified and directed by Engr-in-Charge. Note:- (i) Excavation and earth work shall be measured and paid for separately. (ii) Thimble for cable termination on Junction box/ panel as required should be included in this rate.
All as per item No. 14 here-in-above but size 70 Sqmm, 3.5 Core.
All as per item No. 14 here-in-above but size 95 Sqmm, 3.5 Core.
All as per item No. 14 here-in-above but size 120 Sqmm, 3.5 Core.
All as per item No. 14 here-in-above but size 185 Sqmm, 3.5 Core.
Taking out old unsv street / flood light fitting of any capacity from existing pole complete all as specified and directed by Engr-in-Charge.
S&F energy saving LED street light of 60 Watt Capacity high pressure die cast aluminium housing with seal toughened glass cover, light source should be multi LED SMD system efficacy should be minimum 110 lumen/watt cool/warm as per site requirement,voltage range 120 -220 Volts IP -66 THD Less than 10% surge protection minimum 5 KV with flash indication, driver should be potted / CE certified/R certificate and Driver efficiency 85% including making connection complete all as specified and directed by Engr-in-Charge.
Supply and erecting in true vertical position steel tubular swaged pole 09 mtr long type 410 SP-31) complete with base plate and bracket fixed at top, painted internally throughout and externally up to the embedded depth with two coats of black bituminous paint and remaining external portion with two coats of aluminium paint over a coat of red oxide primer including providing 30cm wide alternate strips with sky blue and white synthetic enamel paint upto 1.2m high from ground level including excavation work (1.5*0.6*0.6 mtr) and PCC (0.6*0.6*1.5 Mtr) for erecting electric pole of length 9 mtr pole including taking down old pole complete all as specified and directed.
Supply and fix pole mounting junction boxes made out of SMC of size 250 x 200 x 105 mm (HxWxD) with 3 phase strip and 1 neutral strip, side hinged door fixed to the base with hinges suitable for 4 wire system including MCB SP 6 Amps 240 volts - 01 No, Shock proof and rustproof Cable entry from bottom and or sides,100% weatherproof, including Pole mounting arrangement like clamps, nuts etc, maintenance-free complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in mass concrete for filling in foundation of stay/pole including necessary form work complete all as specified and directed by Engr-in-Charge.
M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles,earth pit ,including provision of necessary form work, finishing even and smooth without using extra cement including applying exterior emulsion paint (apex) complete all as specified and as directed by Engr-in-Charge.
Supply and jointing of indoor/outdoor cable end terminal joints/straight through heat shrinkable type complete suitable for aluminium conductor cable of size 50 Sqmm 3½ Core to 95 Sqmm 3½ Core complete all as specified and directed by Engr-in-Charge.
All as per item No 25 but for cable of size 120 Sqmm 3½ Core to 185 Sqmm 3½ Core.
All as per item No 25 but for cable of size 240 Sqmm 3½ Core to 300 Sqmm 3½ Core.
M&L in replacement of timer switch single phase inbuilt over-ride facility, high switching capacity, tamper proof sealing, analogue & digital version daily / weekly programming, supply voltage 240 VAC, frequency 50 Hz complete electrical connectioncomplete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of power contactor 3 pole, 265 Amp 415 volt, 50 Hz with control rated operational current AC1, 415 V, type - HGS 265 complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of power contactor 3 pole, 300 Amp 415 volt, 50 Hz with control rated operational current AC1, 415 V, type - HGS 300 complete all as specified and directed by Engr-in-Charge.
Taking out of U/S MCCBs of any type any capacity by disconnecting all electrical connections all as directed at site complete all as specified and directed by Engr-in-Charge.
S&F of MCCB 4 Pole, 415 V, with adjustable type including necessary fitting arrangement & testing complete of following sizes:-
63 Amps 4 Pole breaking capacity 16 KA.
160 Amps 4 Pole breaking capacity 36 KA.
250 Amps 4 Pole breaking capacity 36 kA.
400 Amps 4 Pole breaking capacity 36 kA.
Supply, Install, testing and commissioning of Lightning arrester (ESE) type of copper arrester, GI mast of 12 mtr long, counter meter, guy wire kit, copper bonded rod with 50 kg compound bag, copper cable of 70 Sqmm single core, ESE (Early Streamer Emission) arrester including necessary accessories complete all as specified and directed by Engr-in-Charge.
M&L for installation of maintenance free Chemical Earthing with copper bonded earth rod of 17.2 mm dia, 3 meter long with suitable copper plate of 250 micron welded with necessary connections clamps including 2 X 25 kg backfill chemical compound complete all as specified and directed by Engr-in-Charge. Note : The pit shall be constructed in PCC 1:2:4 type B1 using (using 20mm grade stone aggregate) RCC slab shall be provided in RCC 1:2:4 type B-1 (using 20mm grade stone aggregate) 50 mm thick pit cover reinforced with 8mm dia TMT bars 75mm c/o both ways MS handle 12mm dia with good finishing as specified.
S&F earthing continuity copper strip of size 32 mm x 6 mm with all fixing arrangements such as clamps/MS screws/saddles/PVC gutka/ Brass Nut bolt/ Porcelain insulator & washers etc., complete all as specified and directed by the Engr-in-charge.
S&F Test point termination block of size 75 mm x 75 mm x25 mm made of Gun metal or phosphorous bronze drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screw and box of size 90x90x90 mm (made out of 1.6 mm thick plain sheet) and screwed to wall for protection of test point complete all as specified and directed.
S&F air cooled split unit air conditioner electric driven (single phase) cooling capacity 2.0 Ton split units indoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 complete all as specified and directed by Engr-in-charge.
S&F air cooled split unit air conditioner electric driven (single phase) cooling capacity 2.0 Ton split units indoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 complete all as specified and directed by Engr-in-charge.
S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5 % and capacity 5 KVA including necessary connections complete all as specified and directed by Engr-in-charge.
M&L for one 3 pin socket out let 16 amps independent wiring with cable of size 4.0 Sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated (unsheathed) 1100 volts grade conforming to IS-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement mortar (1:3) to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge. Note: Cutting not exc 4cm girth and 4cm width for one light point controlled by one, one way switch.
M&L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2 x 4 sq mm and 1 x 4 sq mm as in continuous earth wire drawn in to & including PVC conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete all as specified and directed by Engr-in-charge. Note: Cutting not exc 4cm girth and 4cm width.
S&F for single pole and neutral enclosure with a two pin and earth plug and socket complete with one 20 Amp MCB including electric connection complete all as specified and directed by Engr-in-charge.
Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc. (for light, fan, socket or power) complete,including fixture and fitting such as switches,ceiling Roses, pendants,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed surfaces of walls, Floors, ceilings etc. complete all as specified and directed by Engr-in-Charge.
Taking down carefully sub main wiring of size including batten and making good disturbed surface of wall complete all as specified and directed by Engr-in-Charge.
M&L complete for wiring with cable of size 1.5 sqmm single core copper multisrand conductor including continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc. and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement motor 1;3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr-in-Charge, Cutting not exc 4cm girth and 4cm width, for followings:-
One light point controlled by one, one way switch
M&L Complete For modular switch one way 6 amps 1 module.
S&F complete modular metal flush box 4 module including cutting of chassis and making good disturbed surfaces and rate deemed to be included in quoted ratecomplete all as specified and directed by Engr-in-Charge.
S&F complete modular white cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge.
M&L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2x2.5 sq mm and 1x2.5 sqmm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed and including necessary cement work including cutting chases pinning in making good to facing and pointing in cement mortar 1:3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete all as specified and directed by Engr-in-Charge. Note: Cutting not exc 4cm girth and 4cm width.
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-Charge.
M&L in replacement complete for detectors complying with and type certified to EN 45 addressable type multisensor detector with heat and smoke combination complete all as specified and directed by Engr-in-Charge.
Taking down carefully existing central AC duct / duct cover / duct mesh and re-fixing the same after completion of false ceiling work complete and making good the disturbed surfaces of duct portion with necessary accessories complete all as specified and directed by Engr-in-Charge.
Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
M&L for Providing & fixing with semi perforated 12mm thick micro false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 4 76 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of maint runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge.
M&L for complete removal of existing treatment on walls, chajjas etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil, greasy spots and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge.
S & F of non transparent looping SMC kiosks pole box 3 phase of size 310 x 210 x 120 mm made out of engineering plastic one piece moulding Siemens grey colour with hold fast including 4 Nos of aluminium strips 60 amp of required size fixed on unbreakable insulator and one No of single pole MCB SPN 16-63 Amp, C curve including taking out of old unserviceable complete all as specified and as directed. Make: Legrand/Universal switch gear control
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
S&F of Flameproof cum Waterproof LED Bulk Head/ Flood light fitting of 60 W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directd by Engr-in-Charge.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_837828.xls
BOQ • 0.37 MB
Tender.pdf
Tender Documents • 0.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .