GRAMIN TURIST HETU GRAM RAISAR ME HEIGHT MASK LIGHT (QTY 5) LAGANE KA KARY

Supply of erection testing and commissioning of high mast lighting system of 16 metres (as per CP 3 TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast lantern carriage suitable for up to 12 Nos luminaires with welded arm, mast head frame assembly with full cover, aviation obstruction neon light double drum self sustaining which, integral power tool accessible from door with padlocking arrangement (which motor with control circuit) hot dipped galvanised heavy duty pipe lightening final suitable ropes (AISI 316, 7/19 construction), EPR insulated PCP sheated trailing cable, outdoor type control panel for auto on/off, reverse /forward motor operation and cc foundation of M-25 grade complete as required. The mast is constructed from a mile steel plates (as per IS 5986 Gr 510) cut and folded to from a polygonal section telescopic jointed and welding as per BS-5135. The complete work shall be supervised and certified by the manufactures for satisfactory supply erection testing and commissioning of High mast. E180901 12.5 m HM(in 2 section)

Spplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD elec IS :694) as per IS 8130:2013 of 1.1 KV grade. Wire should be made from 99.99% purity copper, class 5 strading in acc, to IEC 60228 for lower watt loss, oxygen free (< 10 ppm) for less chances of oxidization and higher silver content for gives better conductivity, Insulation PVC type A, flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, in exiting surface or recessed PVC / MS conduit/ cassing capping including all as per pre approved by Engineer in charge, making connections, etc. as required. OEM Must have its own in house NABL lab technical parameters of products / work, (Item No. E040126)16 sqmm 4 core

S&L Fllowing size earth wire / strip in horizontal of vertical run in ground /surface /recess including rivetin soldering, saddles, making connection etc as required 8 SEG G I wire.

P&F of AC operated heavy duty 230/440 volts power contactor as per PWD specification for electrical work, ISI marked IS/IEC 60947-4-1:2000 having provison of mechanical interlocking auxiliary contacts, Din rail mounting type including making connections testing etc. as required, All as per approved by Engineer in charge for additional technical parameters of products /work (Item No. E-0816209) For 325 Amp

Providing and Fixing of HDPE pipe ISI mark for water supply (suitable for sumersible & jrt pump) with required fittings.50mm dia 6kg/cm2

Plate earthing as per PWD specification for electrical works as per IS 3043 with copper Earth Plate of size 600mm_600mm_3.0mm by embodying 3 to 4 meter. below the ground level with 20mm dia "B" class GI watering pipe including all accessories like nut, bolts, reducer, nipple, wire, mashed funnel heavy duty weather proof poly propylene earth pit chamber with lockable jam free lid suitable for safe woerking load 500kg or more size Top dia 225 to 260 mm, Bottom dia 300 to 350mm and height 250 to 300mm and embodying the pipe complete with alternate layers salt and coke / charcoal, testing of earth resistance for value of 5 ohms or less as required and must record by Engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge for additional technical parameters of products / work, (Item No. E-0140300)

S & Laying following size B class G I pipe confirming to IS 1239 P-1 (1990) with accessories for laying earth conductor / strip / cable in ground surface as required. (PWD ITEM CODE - E-140806)50mm dia

Providing and Fixing of IP -65 Protected LED aviation obstruction light luminaire comprising of yellow painted die cast aluminium alloy housing, with polycarbonate enclosure having more than 200 No's Low Power LED's having mininum power consumption 15 watts complete in all respect. all as per pre approved by Engineer in charge for additional technical parameters of products / work,Aviation obstruction LED light luminaire min. 15 watts (E-181001)

Pipe 2000mm Long, 50/25mm, Terminal 40mm6mm GI strip (PWD ITEM CODE E-140511)

P&F of IP 65/IP 66 protected High Power LED flood light system with extruded aluminium housing, toughened glass diffuser with suitable lensed on LED to achive various bean angles, 240 V, 50HZ - high power LED lamps supplied with pre-wired cable of 1 mtr. Intergrated Driver shall be high efficiency having efficiency >85% and in compliance to IEC standards. System life of 25000 Burning hours with 70% of initial Lumens maintained. Light output in Cool white or warm white colour as per Engineers choice. Fixtures shall be CE and compliance High power LED Flood Light 200 W. (PWD ITEM CODE E181210)