WORK

Amount

Details of Work

Supply of AC Power Receptacle with rating 3 phase 415 volt 400 Amp cubical shall be of size 1550x800x500mm with MS sheet thickness not less than 14 SWG duly power coated of good quality. The receptacle shall be provided with manually operated 1 no. 400 MCCB L&T make, 03 nos. aluminium insulated bus bar of size 25x10mm for 3 phase and 1 no. for neutral having size 25x5mm 3 no. kit kat fuses, 3 no. R/Y/B indicators for all phases L&T make. The cubical fitted with two no. 3 phase four pole TPN MCB 63 Amp and 12 nos. 3 phase four pole TPN MCB 15 Amp suitable for giving supply to 33 KV Breakers, Isolators, Lighting fixtures etc. The cubical shall have the provision of visual indication of incoming supply & indoor light fitting 09 Watt LED with the power cubical shall be weather proof.

Fixing of 03 Phase AC Power Recaeptacle of size 1550x800x500mm by fabricating proper frame to hold it and grouting the same with help of fasteners on block of concrete having 30 cm above ground level with mixture of 1:2:4 at the location decided by the supervising engineer.The box should consists of cable gland duly fitted in gland plate fixed on the bottom of cubical box with proper locking arrangement. work includes carriage of power receptacle to the location, inclusive of cost of labour and T&P required to complete the job satisfactorily.

Laying of 3.5Cx95/75/50 sq.mm LT Power cable 60 cm below the ground level after excavation and put the 1st class bricks and river sand along side of cable and back filling with proper termination on cables at both end complete with Lugs, Glands etc. of proper size. (Work includes cost of Labour and T&P required to complete the job under the guidance of Junior engineer incharge, required power cable will be provided by the department.)

Earthing of panel with the help of MS Flat of size 50x6 mm and connecting it with earth mat including digging and back filling and ramming as per UPPTCL practice. MS Flat will be provided by department free of cost as per actual consumption.

Providing & fixing work of Name Plate made of 2mm thick aluminium sheets with covering of 3HP retroreflective sheeting of size 300x150 mm plate to be fixed with the help of nuts & bolts of already installed equipment , structures as per sample, provided by department free of cost.

Providing & fixing of Phase Plate equipment (R,Y,B) phse made of 2mm thick aluminium sheets with covering of 3HP retroreflective sheeting of size 5" dia plate to be fixed with the help of nuts & bolts of already installed equipment , structures as per sample, provided by department free of cost.

Boring with 150 mm Dia casing pipe to a depth of 27.00 meter long from ground level with skilled and unskilled labour including all T&P, boring apparatus and supervision charges etc. required for proper completion of work. By Inserting 40x6 mm GI Flat in 50 mm Dia B-class (Jindal) ISI mark 6.0 meter long 3 pipe placed horizontally on ground and bolting the G.I flat with 150 mm long 75x6 mm copper plate conical piece on and then bolting the G.I flat with G.I pipe in such a way that flat remains in contact with the pipe, Lowering of 6.0 meter long with G.I pipe with conical copper plate connected and at bottom along with G.I flat inside the pipe in boring of 150 mm G.I pipe pieces by G.I sockets along with 40x6 mm G.I flat from the upper end of pipe by making a cut of 45 mm wide up to a depth of 50 mm in upper portion of G.I pipe and providing 01 no. cap type G.I socket on upper treaded portion of pipe for water pouring in the pipe at regular intervals filling the space.

Fabrication of M.S electrodes out of 40 mm dia M.S round 3.0 meter long having 150 mm long conical shape. MS Round bar will be provided by department free of cost as per actual consumption.

Excavation of pit of size 2.00x2.00x4.5 driven of M.S electrodes of 40/36/32 mm dia 3.0 mtr long in the earth at four corners of the pit at equal distance of 2.0 mtr long, keeping the top of electrode 50 cm above the pit ground level, welding of 40 mm M.S round pieces of 03 mtr long on all four sides of electrodes and 15 cm below of top of electrodes by 08 nos U type clamp of 50x6 mm G.I flat on opposite side of square welding of 40x6 mm G.I flat on opposite M.S electrode driven in ground and connecting the 40x6 mm G.I flat. MS Flat will be provided by department free of cost as per actual consumption.

Interconnecting work of connecting bore earth point with nearby Main structure of 33 KV Bhaura Danda bay equipments with MS Flat of size 50x6 mm. This work includes laying, cutting, bending, welding and painting of MS Flat with one coat of Red oxide primer and two coats of Green colour of standard make like Nerolac, Berger, Asian etc.

SUPPLY

Supply of Fire bucket stand made of angle iron, size 40X40X6 mm having arrangement for having 14 nos. buckets on suitable hooks made of M.S. sheets of 18 S.W.G. and printed with post office red enamel paint. The stand should be as per site requirement.

Supply of Fire bucket having 9 ltr. Capacity and painted with red color paint from outside & white color paint from inside written with FIRE on outer surface.

Supply of Flexible Copper Bond made of electrolyte copper rope of size 16X750mm tinned copper lug shall be pressed jointed both end of copper bond as per technical specification for connecting the 33 KV Bhaura Danda Pump canal bay equipments with earthing strips for strengthening the earthing for protection & metering point of view.

Supply of Hot dip galvanized Cable Tray 18 SWG having weight 100mm as per technical specification.

Supply of Hot dip galvanized Cable Tray 18 SWG having weight 75mm as per technical specification.

Portable AFFF Mechanical Foam type Fire Extinguisgers complete with initial charge Hose pipe and all other accessories and fittings as per IS 1024 Trolley/wheel mounted 45/50 Ltr capacity.

Manual Carbon Di-oxide Fire extinguishers (9.0Kg)

Manual Carbon Di-Oxide Fire extinguishers (4.5Kg)

Rates qouted by the bidders shall be without taxes. Taxes applicable if any to paid extra

SARASWAT ELECTRICALS (BID ID -5227581)

S N ENTERPRISES (BID ID -5227603)

TIRUPATI ELECTRICALS (BID ID -5227573)