CERTAIN SPECIAL REPAIR AND LBW WORK AT SUNJUWAN UNDER GE JAMMU

Amount

Demolition of brick work or stone / boulder masonry, built in lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for complete all as specified and as directed.

Excavating over areas not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed.

Excavating over areas exceeding 1.5 m deep but not exceeding 3.00 mtr and getting out in soft / loose soil complete all as specified and as directed.

Excavating over areas exceeding 3.0 m deep but not exceeding 4.50 mtr and getting out in soft / loose soil complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for RCC M-25 design mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour for RCC M-25 design mix (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and labour for RCC M-25 design mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Material and labour for RCC M-25 design mix (using 20 graded crushed stone aggregate) for walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

Material and labour for formwork to sides of rough finished flat surfaces of concrete pillars, posts, struts, piers, columns and stanchions fair finished surfaces of concrete in square, rectangular etc complete all as specified and directed.

Material and labour for formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter fair finished surfaces of concrete etc complete all as specified and directed.

Material and labour for formwork to sides and soffits of rough finished surfaces of concrete floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams fair finished surfaces of concrete etc complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm and above, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and as directed.

Material and labour for 5 mm dia and over upto 10 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fixing mild steel hand rails, half round or other steel section or core for hand-rail straight portion drilled and countersunk for ballusters, running bars, for doors, ballusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Grade 'E'-165 complete all as specified and as directed.

Supply and fixing in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks in cement mortar (1:4) straight or curved on plan exceeding 6m mean radius etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 15 mm thick cement plaster in cement mortar (1:4) finished even and smooth without using extra cement on walls complete all as specified and as directed.

Material and labour including preparation of new plastered surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Material and labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Returning and filling well compacted and ramming to a true surfaces complete all as specified and as directed.

Removing of excavated material to distance not exceeding 50 metre from starting point complete all as specified and as directed.

Supply and fixing 600 mm dia concertina coil on 'Y' angle complete all as specified and as directed.

Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus moss, dust etc cleaning the RCC roof surface wire brushing complete all as specified and as directed.

Material and labour for rendering 20 mm thick in cement mortar (1:4) on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid separately.

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 litre / Sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyster mat weighing not less than 160 gm / Sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch and applying two coats of aluminium paint complete all as specified and as directed.

Taking down cement plaster / wall tiles from concrete / stone surfaces including raking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4), finished even and smooth without using extra cement (external plaster) with water proofing compound complete all as specified and as directed. Note: - All rendering shall be upto 3 floor roof of building and necessary scaffolding shall be included in the rates quoted by the contractor.

Material and labour for applying two coats of wheather proof paint exterior grade over one coat of wall care putty including all scaffolding arrangement up to four storeyed building complete all as specified and directed.

Dismantling water tanks of any size and refxing the same after cleaning and removing all scale and dirt, etc from overhead water tanks and from mouths of circulating pipes of any capacity complete all as specified and as directed.

Supply and fixing 1000 litres PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S RAVINDER SINGH

M/S TRIKUTA BUILDERS

Bidder Name

M/S TRIKUTA BUILDERS

M/S RAVINDER SINGH

M/S Sukhmani Construction Co.