Name of work-Construction of Lawyer's hall Building at civil court Supaul,Dist-Supaul

Earth work in rough excavation , banking excavated earth in layer not exceeding 20 cm in depth , breaking clods watering , rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depressions. lead upto 50 m and lift upto 1.5 m. All kinds of soil

Extra for every additional lift of 1.5 m or part thereof in : All kinds of soil.

Supplying and filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Close timbering in case of shafts, wells, cesspits, mannoies and the like including strutting, shoring and packing cavities (wherever required) complete (Measurements to.be taken of the face area timbered):Depth exceeding 1.5 m but not exceeding 3 m

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level.1:2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc., for mass concrete.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, Pillars, Piers, Abutments, Post and struts

Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete.

TMTC-500- 8mm dia .

TMTC-500-10 mm dia.

TMTC-500-12 mm dia.

TMT FE-500-16 mm dia.

TMT FE-500-20 mm dia.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cementcontent as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and including retard setting of concrete, improve workability without impairing strength and admixtures in recommended proportions as per IS: 9103 to accelerate,reinforcement,durability as per direction of Engineer-incharge.All work upto plinth level

All work upto plinth level

All work from plinth level upto floor V level.

Reinforced cement concrete work in wall (any thickness), including attachedpilasters,buttresses,plinthandstringcourses, fillets,columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :Cement mortar 1:6 (1 cement: 6 coarse sand ) - 250 mm and 125 mm th Brick work foundations and plinth .

Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in superstructure .Cement mortar 1 : 4(1 cement : 4 coarse sand)

Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in superstructure .Cement mortar 1 : 6(1 cement : 6 coarse sand)

Brick work with bricks of class designation 100A in foundations and plinth in Cement mortar 1:4 ( 1 cement: 4coarse sand)

Providing 250 mm wide brick drain in cement mortar (1:6) with av. 150mm.Clear depth and 250 mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation100-A flat soling in proper grade and slope at the base.the drain duly .plastered in CM.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l,

Providingand fixing18mmthickgangsawcut,mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of requiredsize,approvedshade, colourandtexture laidover20mm thick base cementmortar 1:4 (1 cement : 4coarse sand), joints treatedwithwhite cement, mixedwithmatching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab upto 0.50 sqm

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board 25mm thk

Providingand fixing ISImarkedaluminiumbutt hingesanodised (anodic coatingnot lessthangradeAC10asper IS:1868) transparentordyedto required colour or shade with necessary screws etc. complete : 75x63x4 mm

Providingandfixingbright finished brass butt hinges with necessaryscrews etc. complete125x70x4 mm (ordinary type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete . 250x16 mm

Providing and fixing bright finished brass handles with screws etc. complete: 75 mm

Providing and fixing pressed steel door confirming IS code 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm profile C

Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb,bead and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb

ProvidingandfixingM.S.fanclamptypeIorIIof16mmdia.M.S.barbentto shape with hooked ends in R.C.C slabs during layingincludingpaintingthe exposed portion of loop,all as per standard design complete.

Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer

Providing and fixing Steel Glazed door, Windows and Ventilation.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I.

ProvidingandlayingVitrifiedtiles infloor indifferent sizes{thickness to be specified by the manufacturer) withwater absorption less than 0.08%and conforming toIS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointingwithgrey [email protected] kg/sqm includinggrouting the jointswithwhite cementandmatchingpigmentsetc. Thetilesmustbe cut with the zero chipping diamond cutter only.Laying of tiles will bedone with thenotch trowel, plier, wedge, clips of required thickness, leveling system and rubbermallet for placing the tiles gentlyand easily.Double charge vitrified tile polished finish of size.Size of Tile 600 x 600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make... complete

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Motar 1:3 (1cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Makingkhurras45x45cmwithaverageminimumthicknessof5cmcement concrete1:2:4(1cement:2coarsesand:4gradedstoneaggregateof20mm nominalsize)overP.V.C. sheet1mx1mx400micron, finished12mmcement plaster1:3(1cement:3coarsesand)andacoatofneatcement roundingthe edges and making and finishing the outlet complete

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Single pushfit Coupler:110mm

110mm bend

Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc completen.110 mm

Cement plaster in course sand .12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster 1:3 (1cement :3coarse sand) finished with a floating coat of neat cement

15mmcementplaster1:3(1cement:3coarsesand) finishedwitha floatingcoatofneatcementontheroughsideofsingleorhalfbrick wall.

6 mm cement plaster to ceiling of mix. 1:4 (1 cement : 4 coarse sand)

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.New work (two or more coats) over and including priming coat with cement primer.

Paintingwithreadymixedpaintofapprovedbrandandmanufacture in all shades to give an even shade

Providing and applying white cement based putty of average thickness 2mm, of approved brand andmanufacturer, over the plasteredwall surface to prepare the surface even and smooth complete.

Providingand fixingwhitevitreous chinapedestal typewater closet (Europeantype)withseatandlid,10litrelowlevelwhitevitreouschina flushingcistern&C.P. flushbendwithfittings&C.I.brackets, 40mm flushbend,overflowarrangementwithspecialsof standardmakeand mosquito proof coupling of approved municipal design complete, includingpaintingof fittingsandbrackets,cuttingandmakinggoodthe walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

ProvidingandfixingwashbasinwithC.I.brackets, 15mmC.P. brass pillar taps, 32mmC.P. brasswaste of standard pattern, including paintingof fittingsandbrackets, cuttingandmakinggood thewalls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providingandfixingmirrorofsuperiorglass(ofapprovedquality)andof requiredshapeandsizewithplasticmouldedframeofapprovedmake and shade with 6 mm thick hard board backing :

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.15mm nominal outer dia Pipes

Providingand fixingChlorinatedPolyvinyl Chloride (CPVC) pipes, having thermal stability for hot &coldwater supply includingall CPVC plain &brass threaded fittings Thisincludesjointingofpipes& fittings with one stepCPVCsolvent cement ,trenching ,refilling& testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

ConstructingmasonryChamber60x45x50cminside, inbrickworkin cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement andRCC top slab 1:2:4mix (1 cement :2coarsesand:4gradedstoneaggregate20mmnominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement:5finesand:10gradedstoneaggregate40mmnominalsize) and insideplasteringwithcementmortar1:3 (1cement : 3coarse sand) 12mmthick, finishedwith a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100A

ProvidingandfixingG.I.UnioninexistingG.I.pipeline,cuttingand threading the pipe and making long screws, including excavation,refillingtheearthorcuttingofwallandmakinggoodthe same complete wherever required :15 mm nominal bore

G.I. Union-15 mm dia.

G.I. Union-25mm dia.

Providingandplacingon terrace (at all floor levels) polyethylene water storage tank, ISI : 12701marked, with cover and suitable lockingarrangementandmakingnecessaryholesforinlet,outletand overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931

Providing and fixing C.P brass stop cock (concealed) of standard design and of approved mark conforming to IS:8931. 15mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved quality conforming to IS: 8931. 15mm nominal bore

Makingsoakpit2.5mdiameter3.0metredeepwith45x45cmdry brickhoneycombshaftwithbricksandS.W. drainpipe100mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.White Vitreous china Orissa Pattern W.C pan of size 580x440mm with integral type foot rests.

Providingandfixingaluminiumroundshapehandleofouterdia 100mmwithSSscrewsetc.completeasperdirectionofEngineer in-charge

Boringwith100mmdiametercasingpipeforhandpump/ tubewell, inall soilsexceptordinaryhardrocksrequiringblasting, including removingthecasingpipeafter thehandpump/ tubewell islowered and tested :

Up to 6 metres depth

Beyond 6 m and up to 12 m depth

Beyond 12 m and up to 18 m depth

Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required 150mm dia etc all complete job as per building specification & direction of E/I.100 mm nominal size dia

Supplying assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipe of required 150mm dia etc all complete job as per building specification & direction of E/I.50 mm nominal size dia

Gravel packing in tubewell construction in accordance with IS:4097 including providing gravel line/medium/coarse in required grading and sizes etc all complete job as per building specification & direction of E/I.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe 150mm dia etec. All complete job as per building specification & direction of E/I.100mm dia M.S Cap

Providing and fixing mild steel clamp of required dia to the top of casinghousing pipe of tubewell 100mm dia etec. All complete job as per building specification & direction of E/I.100 mm dia M.S Clamp

Providing and fixing bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part-1) 150mm dia etec. All complete job as per building specification & direction of E/I.Bail/bottom plug.

Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes havaing thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings etc all complete jobs.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box etc all complete jobs.

Supply,Installation, testing & Commissioning of 1 HP submersible pump all complete

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.150 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:150 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.150 mm clamp

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).150 mm dia

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm diameter

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

Coupler, 110mm

Single Tee withdoor, 110x110x110mm

Band 87.50, 110mm band

Shoe plain, 110mm shoe

Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.110 mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 100A

P/V labour for cleaning the site & uprooting trees etc all complete jobs.

Supplying, fitting and fixing Rectangular size of Standard Size of Teak wood Table of Approved brand and Manufacture etc. all complete Job.

Supplying, fitting and fixing of chair of Approved brand and Manufacture etc. all complete Job.

Supplying testing installing and commisioning of ISI marked 4.5kg capacity carbon dioxide type including valve hose reel with provision of wall bracket fixed with anchor fasteners all complete job

Providing and fixing abc powder type fire extinguishers as per is 15683 consisting of welded ms cylindrical body automatic modular abc powder type extinguisher actuated through a sprinkler head mounted on the extinguisher body complete with internal charge Make:- Newage/ Ceasefire/Kalpex .Capacity 6Kg ISI Marked