Lake front development at Retteri

Amount

Civil Works

Clearing scrub jungle including removal of stumps roots and disposing of the same etc complete as directed by the Engineer in charge of works and as per the technical specifications.

De-watering of using diesel pump set having capacity 20 HP including cost of hire charges, diesel, labour etc complete complying with standard specifications and as directed by the departmental oficers

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Conveyance of Earth/Debris to a lead of within 30 km from site as directed by the Engineer inculding loading, unloading, hire charges for vehicle and other incidental charges etc., all complete as directed by the Departmental Officers

Supplying and FILLING GRAVEL Supplying and filling in foundation and basement with filling M- sand in layers of not more than 15cm.thick well rammed watered and compacted -1Cu.m etc., complete complying with standard specification.

Gravel backing for revetment in layers not exceeding 15 Cm thick including stacking for premeasurement, watering, consolidation and trimming the top surface so as to receive the rough stones, etc complete complying with standard specifications and as directed by the departmental officers

Providing Laying Spreading and Compacting Graded Stone aggregates( size range 53mm to 0.075mm) to wet mix macadam (WMM) Specification including premixing the material with water at OMC in forall leads& lifts Laying in Uniform Layers with Machanical Paver Finisher in sub-base/base course on wellprepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density complete as per Specification and Direction of Engineer-in- Charge

Supply, Filling, spreading & Leveling stone boulders of size range 5cm to 20cm, in Recharge pit in the required thickness for all leads & lifts, all Complete as per direction of Engineers- in -charge.

Construction of Embankment with approved Earth materials deposited at site from roadway cutting and excavation from drain and foundation of other structures, graded and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly for Flooring including Laying, Consolidating, Finishing, rendering the Top surfaceRough to recivethe Floor Curing etc…… Complete complying with standard Specification. (the rate is Including of Necessay planting for panelling wherever necessary and as Directed by the departmental offices

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Pointing with cement mortar 1:3 (One cement and three sand ) to full depth including finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers ( Flush pointing )

Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 k9. of 20mm machine crushed stone jelly and with about (3'3 cu'm') 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg' of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials foundation and basement

Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 k9. of 20mm machine crushed stone jelly and with about (3'3 cu'm') 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg' of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials ground floor

providing and Laying in Position, standardised Concrete Mix M-30 grade in Accordance with IS: 456-2000 Using 20mm and Down graded hard broken granite stone jelly for all Rcc Items of works with minimum cementcontent of 400 kg/ms and maximum water cementratio of 0.45 including admixture(plasticiser/ superplasticiser) in recommended propotions as per IS:9103 to accelerate. retard setting of concrete.Improve workability without impairingstrength and durability with about (5.0cum)7730kg of 20mm machine crushed stone jelly andwith about (3.3cum) 5156kg of 10-12kg machine crushed stone jelly and with about (4.79cum) 7670kg of M-sand but excluding cost of reinforcement Grill and fabricating charges, centering and Shuttering and also including laying, Vibrating with machanical vibrators, finishing, curing, etc.. and providing fixtures like fan clamps in Rcc floor /roof slabs whereever necessary without claiming xtra etc.. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials) foundation and Basement

providing and Laying in Position, standardised Concrete Mix M-30 grade in Accordance with IS: 456-2000 Using 20mm and Down graded hard broken granite stone jelly for all Rcc Items of works with minimum cementcontent of 400 kg/ms and maximum water cementratio of 0.45 including admixture(plasticiser/ superplasticiser) in recommended propotions as per IS:9103 to accelerate. retard setting of concrete.Improve workability without impairingstrength and durability with about (5.0cum)7730kg of 20mm machine crushed stone jelly andwith about (3.3cum) 5156kg of 10-12kg machine crushed stone jelly and with about (4.79cum) 7670kg of M-sand but excluding cost of reinforcement Grill and fabricating charges, centering and Shuttering and also including laying, Vibrating with machanical vibrators, finishing, curing, etc.. and providing fixtures like fan clamps in Rcc floor /roof slabs whereever necessary without claiming xtra etc.. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials) Below ground Level 10.5 m to 4.5m

providing and Laying in Position, standardised Concrete Mix M-30 grade in Accordance with IS: 456-2000 Using 20mm and Down graded hard broken granite stone jelly for all Rcc Items of works with minimum cementcontent of 400 kg/ms and maximum water cementratio of 0.45 including admixture(plasticiser/ superplasticiser) in recommended propotions as per IS:9103 to accelerate. retard setting of concrete.Improve workability without impairingstrength and durability with about (5.0cum)7730kg of 20mm machine crushed stone jelly andwith about (3.3cum) 5156kg of 10-12kg machine crushed stone jelly and with about (4.79cum) 7670kg of M-sand but excluding cost of reinforcement Grill and fabricating charges, centering and Shuttering and also including laying, Vibrating with machanical vibrators, finishing, curing, etc.. and providing fixtures like fan clamps in Rcc floor /roof slabs whereever necessary without claiming xtra etc.. complete complying with standard specification and as directed by the departmental officers. the coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials) ground floor

Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 k9. of 20mm machine crushed stone jelly and with about (3'3 cu'm') 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg' of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials 1st floor

Providing and laying in position, standardised concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 k9. of 20mm machine crushed stone jelly and with about (3'3 cu'm') 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg' of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials 2nd floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) (Rate For Plain Surface like RCC Boxing side Slab and similar Vertical Slab with al cross Bracing etc)

Supply and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29m Height for plane surface as detailed below in all Floors with all cross Bracings Using Mild Steel sheets of Size 90x60cm and 10 bg Stiffened with welded Mild stell angle of 25mmx25mmx3mm for boarding laid over silver oak joints of size 10cm x6.5cm spaced at about abote 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more then 75cm centre to centre etc.. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) (For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.)

Supply and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29m Height for plane surface as detailed below in all Floors with all cross Bracings Using Mild Steel sheets of Size 90x60cm and 10 bg Stiffened with welded Mild stell angle of 25mmx25mmx3mm for boarding laid over silver oak joints of size 10cm x6.5cm spaced at about abote 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more then 75cm centre to centre etc.. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid)For plan surface as Rectangular or Square RCC Column, Sunshades,Top and Bottom Slab of RCC Boxing etc..

Supply and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29m Height for plane surface as detailed below in all Floors with all cross Bracings Using Mild Steel sheets of Size 90x60cm and 10 bg Stiffened with welded Mild stell angle of 25mmx25mmx3mm for boarding laid over silver oak joints of size 10cm x6.5cm spaced at about abote 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more then 75cm centre to centre etc.. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) centering for RCC Circular columns etc…

Supply and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29m Height for plane surface as detailed below in all Floors with all cross Bracings Using Mild Steel sheets of Size 90x60cm and 10 bg Stiffened with welded Mild stell angle of 25mmx25mmx3mm for boarding laid over silver oak joints of size 10cm x6.5cm spaced at about abote 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more then 75cm centre to centre etc.. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) centering for curved surface as RCC Beams facia etc….

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works of Pergola, Gate for compound wall and grill at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS plates, flats, squares etc., of various sizes and other structural steel sections conforming to latest IS2062 Grade - A&B including straightening, cutting, welding, bending to shape, bolting and inclusive of the following finishes.The rate including cost of all materials, labourchanrges, scafolding, stagging, transportation, lead & Lifts, wastage, etc., complete with all respects complying with relevant standard specification, as directed by the Engineer-incharge. All MS members shall be painted with one coat of zinc nchromite primer and 2 Coats of 35 microns DFT of synthetic enamel paint of approved colour and make etc,.The rate includes the cost of all materials,labour,tools,tackle and plants, wastage etc.,as per specification and drawings complete. The rate quoted is to include cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for. The rate to include preparation of fabrication shop drawings for owner's approval:

Random rubble masonry work in cement mortar 1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) including fixing of bond stone wherever necessary including curing, etc., complete.

Brick work using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4"" in Cement Mortar 1:5 (One cement and five crushed stone sand) including curing neat finishing, etc., complete complying with standard specifiction.

Manufacturing and fixing the Cement concrete block of size 300 mm X 250 mm X 200 mm of mix M 15 grade using machine broken hard blue granite broken stone jelly of 20 mm size including the cost and conveyance of all materials to work site, labour charges for fixing the same in position and neat finishing,including all other incidental charges, handling charges etc complete complying with standard specifications and as directed by the departmental officers

Supplying and laying of Interlocking Paver Block Stone 60mm thk. Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

Plastering the Surface of walla with cement mortar 1:5 (one cement and three P-sand) 12mm thick in all Floors including curing etc.. complete complying with standard specification and as directed by the Departmental officers.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the Floor with pre-polished concrete tactile Flooring tiles (required shape and design) of 15mm thick of approved quality and colour laid in cement Mortar 1:3 (one cement and three M-sand ) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg / sqm. curing etc.. complete complying with standard specification and as directed by the departmnetal officers. (the make and brand of the tiles should be got approved by Executive Engineer before use on works)

Fabricating supplying and fixing the hand rails are provided with 100x100 x 6.0mm thickness of size G.I Square tubes of 1.80m length as vertical size as a vertical mebers fixed @ 2.0m C/c and 0.6m shall be embedded concrete of M15 Grade, 1.00m shall be above ground level and 80x40x5.0mm thickness of size G.I. Rectangular tubes as horizontal member 4 rows welded to the vertical post at equal interval and and one numer of diagonal member in each bay welded to the vertical post and horizandal members, supplying and fixing the Ornamantl item in each vertical post and 2nos of each diagonal members in one bay and applying two coats of synthetic enamel paint over one coat of primer to both of vertical and horizontal G.I square tube members . The cost including the all materials, labour charges, welding charges, cutting, bending,dismantling the PCC, earth work excavation,placing the PCC M10 for using 40mm and PCC M15concrete fixing the vertical post in top of bund portion, etc. complete complying with standard specification and as directed by the departmental officers.

Fabricating supplying and fixing the hand rails are provided with 100x100 x 6.0mm thickness of size G.I Square tubes of 1.80m length as vertical size as a vertical mebers fixed @ 2.0m C/c and 0.6m shall be embedded concrete of M25 Grade, 1.00m shall be above ground level and 80x40x5.0mm thickness of size G.I. Rectangular tubes as horizontal member 4 rows welded to the vertical post at equal interval and and one numer of diagonal member in each bay welded to the vertical post and horizandal members, supplying and fixing the Ornamantl item in each vertical post and 2nos of each diagonal members in one bay and applying two coats of synthetic enamel paint over one coat of primer to both of vertical and horizontal G.I square tube members . The cost including the all materials, labour charges, welding charges, cutting, bending,placing and fixing the vertical post in top of bund portion, etc. complete complying with standard specification and as directed by the departmental officers.

Supply & Installation of "PLAYFLEX®" EPDM Rubber Flooring system with thickness up to 25mm consisting of sandwich two layers, base layer having 19mm Thickness would be made of Black Styrene-Butadiene Rubber and Top finished layer of 6mm would be made of Per-Oxide Size 1-4mm Ethylene Propylene Diene Monomer with 20% base polymer content, these granules to have gravity 1.6 kg/cCu.m, Bulk density 680 – 750 kg/Cu.m, hardness Shore A value 60-65, Tensile Strength >4.0 Mpa and elongation @ Break to be 650%. These granules to be mechanically cut with proper sieve analysis. Raw material ingredients would be mixed with pale yellow colour Clear viscous liquid Poly-urethane Binder in 50 kg drum having NOC Content within permissible limit of 9.50 to 10.5%. Mixing ratio of Binder with weight of rubber material should not be less than 18%. The product should have HIC test from a renowned European Laboratory, According to EN 1177: 2017 method 1 standard, the Critical Fall Height (CFH) is 0.73M.

Supplying and painting the walls with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Supply and fixing of ploycarbonate sheet 6mm thick as per architectural drawing.

Bitumen pad for 20mm thick

Supply and Fixing of solar panels.(Monocrystalline) (540 WP) (BIS/IEC Approved) 4 Nos, Solar Off-grid Tie Inverter (Make-reputed) -2 KW, 150 AH Battery (Make-reputed) -4 Nos, ACDB with NVR , DCDB, DC / AC Cables, Earthing Rod , FRP Walkway, Cable tray, GI Strip, LA Rod, Chemical Compound, PVC Pipe, (Make - Standard) as required at site, Panel Mounting GI Structure (Make-Sunlight) - 2KW, complete complying with standard specification and as directed by the departmental officers.

Supplying and Installation of Extruded Jally Bricks CJ-8 Size: 8'x8"x3" (Per Sqft :2.25 Nos) complete complying with standard specifications and as directed by the departmental officers

Supply and Fixing of WPC - FLOORING & WOODEN FLOORING complete complying with standard specification and as directed by the departmental officers.

Supply and Fixing of DUSTBINS : SS 202 Grade Single stand with Single bin Perforated 45 liters capacity open top complete complying with standard specification and as directed by the departmental officers.

Supply and Fixing of DUSTBINS : MS POLE STAND WITH 110 LITERS X 2 DOME LID BINS complete complying with standard specification and as directed by the departmental officers.

Supply and Fixing of DUSTBINS : FRP TRIO BIN with INNER 3 PLASTIC BINS with Stickers complete complying with standard specification and as directed by the departmental officers.

Supply and Fixing of Puppy/Elephant/Horse/Bike Rider: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. HDPE of size 0.83 m x 0.31 m x 0.87 m. The rates are inclusive of all taxes, transportation charges and installation.

Supply and Fixing of 2 Seater See Saw: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 3.11 m x 0.44 m x 0.66 m

Supply and Fixing of Monkey Bar-VFM: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. Support posts of height 1.82 m are to be schedule Galvanized steel with a 60 mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish. Handrail of size 1.3 m and Dia 48 mm shall be an welded unit, fabricated from 48 O.D. galvanized steel pipes with a baked on powder coating finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Electro - statically applied polyester powder must have a tough finish with maximum durability. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 3.29 m x 1.48 m x 1.80 m

Supply and Fixing of Merry Go Round DX: The Merry go round consists of a round platform which is made of galvanized steel and has a thickness of 2.5 mm. It is also power coated with the thickness of 2.5 mm. It is of Dia 1210 mm. It has 3 inverted “L” shaped handrails which is made of Galvanized steel and of dimensions as 474 mmx 815 mm. It has thickness of Dia 32 mm. The 3 handrails are separated exactly. All the 3 handrails are connected to the Centre with the help of a rod which is also made of Galvanized steel and of Dia 48 mm and height 815 mm. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. The rates are inclusive of all taxes, transportation charges and installation. ALL COMPONENT MEET WITH EN-1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: Dia 1.21 m

Supply and Fixing of 2 Seater Horse Rider/2 Seater Puppy Dog Rider: HDPE of size 1.46 m x 0.30 m x 0.83 m. Specialized connectors such as clamps and couplings are to be cast from aluminum alloy which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. ALL WELDING IS CARRIED OUT BY ROBOTS, WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. The rates are inclusive of all taxes, transportation charges and installation. ALL COMPONENTS MEET WITH EN-1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: 1.46 m x 0.30 m x 0.83 m

Supplying & Instalation of MS Fabricated Toilet Cabin of Size 10’X05’x8.5’.Toilet of size (04’x04’). Male & Female.Sanitary fittings will be Make of (Perry ware)Toilet Of size (06’x10). Handicap. Sanitary fittings will be Make of (Perry ware)Urinals With Half Height Partition.Vitrified Tiles Flooring. Pedestrial Wash basin Partition wall to divide Male, Female & Handicap Compartment. Hard Shell Rubber Matt in Entrance of size 3’x1.5 Water tank Make of (Ganga) 1,500 Liters Septic Tank Make of (Supreme, Safeguard) 1000Liters (Note: need to Digg for septic tank installation.client Scope.) Toilet Container Installation and Material & Labor Charges at Site.

Ms. Fabricated Diper Changing Room of Size 18’x06’x8.5’’. With Necessary electrical fittings with Exhaust fan and cloth hanger.(Full Partition wall in MS frame covered with MDF board to divide Rooms)

Landscape works

Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of \ alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth.

Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller.

Truffing of Korean grass / mexican grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-Charge

Supplying and Planting of Michelia champaka (Shenbagam) tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Cassia fistula tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Bauhinia purpurea tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed bythe site

Supplying and Planting of Spathodea campanulata tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge

Supplying and Planting of Saraca indica tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of JACARANDA MIMOSIFOLIA by tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of MANILKARA HEXANDRA by tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of Kigelia pinnata tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of CALLISTEMON LANCEOLATUS tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of SCHEFFLERA ACTINOPHYLLA tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of MARIGOLD variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Eranthemum varites ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Pachystachys lutea -Lollipop plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Duranta new gold Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Tecoma capensis foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Ophiopogon ornamental foliage Ground cover variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of BOSTON FERN variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Hibiscus hawai foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Nerium oleander dwarf foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Clerodendrum thomsoniae foliage creeper variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Euphorbia splendens foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of CESTRUM NOCTURNUM (night queen) variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Allamanda foliage creeper variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of PSEUDERANTHEMUM LAXIFLORUM variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of COMBRETUM INDICUM(rangoon) variety in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Caesalpinia pulcherrima foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Aglaonema ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Maintenance of shrubs, other ornamental foliage, foliage planting and Trees planting including watering, weeding, application of fertilizers and pesticides, trimming etc for One month

Water supply

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. Below Ground Level For laying PVC pipes of dia 15mm, 50mm

For 15 mm dia (Branch Pipe 1/2 inch)

50mm dia (Main Pipe)

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., completer as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

SPRINKLER (S1- S24) @ 4M C/C

SPRINKLER Tube

PVC Specials for water supply arrangements 2e ) . End cap 15mm dia

15mm dia

PVC Specials for water supply arrangements 2d. Tees 15mm dia Tees

15mm dia

PVC Specials for water supply arrangements 2b. Elbow 15mm dia

15mm dia

Supplying and fixing brass screw down tap of size 20mm dia.Tap

20mm dia

Electrical work

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

LT Panel Design, supply, fixing, testing and commissioning of cubicle type floor mounting Indoor Panel board comprising of the following, the Panel board shall be fabricated as per the detailed specification enclosed. Incoming 1 No: 100A TPN 16 kA MCCB with Changover Switch Incomers shall have 1 set - Digital Combined meter (Having the parameters of Ammeter,Voltmeter). 1 set - LED type RYB,ON,OFF,TRIP indication lamps. Panel mounted Earth Leakage Relay with Leakage current display. 1 set -100 /5A CT CL 1.0 10VA. Outgoings: 5 Nos - 63 A 16KA TPN MCCB.1 No - Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S with RS485. 3 Nos -32 A 10KA TP, MCB 2 Nos - 25 A 10KA DP MCB Note : All the Outgoing feeder shall be having 'on',off,trip' indication lamps..All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. Note:-The panel should be having provision to monitor the On, Off, trip status. BUS BAR RATING: 100A TPN 16 KA for 1 sec. Aluminium bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus.

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board IP 54 Protection with double door (metal) with 1 no. 40A 4P MCB Isolator as incoming and 18 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 4sq.mm Flexible Multicore Cable manufacturedwith electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990

Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 3-1/2C x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection

Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 50Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 4C x 4 sqmm COPPER cable LTUG cable with earth connection.

Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply, erection, testing and commissioning of SOLAR STREET LIGHT POLE OF 3 M Ht GI tubular pole, with bottom and top 75mm size, base plate of size 200x200x10,, of 3mm thickness, finishes shall be Polyurethane coating and coating thickness shall be Min Av 18025 Microns with 4 No. foundation bolts, of size M16x450mm, Type of light - Solar Semi Integrated Hybrid, Solar Panel : Type : onocrystalline Silicon, Power- 40 Watts, Efficiency 19% Light source : LED Application AC DC, LED Osram, Material Aluminium, Battery Type : Deep Cycle Lead Acid, Capacity: 12V, 20 Ah, Backup shall be for 2 days, with integrated charging electronics 10A MPPT charger with Driver Voltage, 12V DC, unction shall be Auto on at Sunset, Charger and Driver Efficiency >90% with short circuit protection, UB stabilized polycarbonate cover of IP 65 Raring, Additional Features : Automatic dusk to dawn peration, Motion sensor for additional energy avings, Over charge and over discharge protection, short circuit protection ,Warrenty - 5 Years on entire system. The rate is inclusive of 4 Nos. J bolts, nuts, washers, termination box. Gland, lugs, termination of cable.- Make - Havells / Chanakya Group, Bangalore.

Supply and fixing of LED Bollard light fitting of 18W - 1 Mtr Ht. with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB, with 2 years Warranty against any manufacturing defect working under standard electrical condition. ..

Supply and fixing of recess mounting non integrated type LED down light 25 W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LED's are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. Make - Kite ..

Supply and fixing of 3W LED Nebula Mini made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass.Mounting earth spike or die-cast aluminium bracket arrangement to facilitate easy installation at any desired location. Swivel range of 0°-90°. Luminaire supplied with 0.5 metre cable length and a IP67 connector. Silicone gasket. Cable entries for through-wiring of mains supply cable. • Integral constant current power supply • CRI (Ra) : ≥80 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Make - Klite ..

Supply and fixing of 1 Watt LED Path finder Protection Class IP 65 Luminaire made of pressure die cast aluminium alloy with non corroive SS fasteners, Industrial plastic installation housing for preparing the recess opening, cable entries for through wiring of main supply cable, non yellowing UV stabilized clear / translucent diffuser / clear polycarbonate , silicon gasket in th make Klite ..

Supply and fixing of 3W LED Wall ligh energy efficient lighting with IP65, silicon seal gasket, step tempered clear lass diffuser, supplied with mounting sleeve for preparing recessed opening in ground or wall, cable entries for through wiring of mains supply cable, energy efficienc : High, as it uses LED technolog. prewired with LED driver and suitable for operating on 240V, 50 Hz single phase AC supply. Make - Klite ..

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp and with copper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms -

First Aid Box complete with all First Aid Medicines

Danger Board as required by the Electrical Authorities

Supply, Installation, Testing and commissioning of 40 channel 4 SATA NVR, with 8T Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Sony / Dahua / Hikvision )

Supply, receiving, Storing, Installation, Testing & Commissioning of Integrated Day/Night 5MP, 30FPS, integrated IR Outdoor IP Bullet camera, vandal-resistant, Automatic Varifocal with 3-10 lens, Remote focus and zoom, microSD card for Local storage, Recess mount type designed for effective 24/7 surveillance with simultaneously connected to both PoE and +12 VDC/24 VAC supplies. The camera shall deliver vivid daytime color and recognise at 25 m (81ft) of Horizontal width with active-infrared night vision of 30 m (98 ft) viewing distance and with all supporting accessories like, Pole, wall or ceiling mount, (Quoted Seperately) adapter (AC 230/12or24V DC, SMPS type)complete as per required...

Supply, receiving, Storing, Installation, Testing & Commissioning of 32" Ultra HD (4K) LED Smart Android TV with Supported Apps, Operating System ; (Android (Google Assistant & Chromecast in-built) Resolutio: HD 1920x1080 pixels, Sound Output-20W, Refresh rate-60 Hz, size - 81.28 Cm. Frame less 100% Dot free IPS panel, Smart Android-11.0, RAM 1 GB, ROM 8 GB, 2 HDMI / 2 USB port, LAN RJ45, 4K support, Screen Mirroring, Sound out put 20W, Voic Control Google Assistant Built in. 1 Year Manufacturer Warrenty Make - Samsung ..

Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories. ..

Supply and fixing of outdoor 4U rack -

Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Supply, erection, testing and commissionng of Small Form Factor Pluggable (SFP) - 8 Port POE Switch, All switches are wire speed and non blocking , switching capacity and forwarding rate 1.6 Gbps and 1.19 mpps (64 byte packets) Expansion ports with mini gigabite terface converter (mini GBIC) expansion slots, power over Ethernet (POE) upto 48 POE ports of fast Ethernet orGigabit Ethernet, IP telephony support, embedded QoS intelligence and automated foice ALAN capabilities, Network management capablities, static routing Layer 3 switching, IPv6 support, nanometer technology, Energy efficient ethernet. The cost is inclusive of Configuring the switch Make CISCO / NEOS ..

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of LIU (Light Guide Interconnection Unit) patch cable. With 6/12/24/48 SC simplex or 6/12/24/48 LC Duplex fibers Adapter interface : ST,SC,FC,LC splice capability maximum of 48 fibers with splice trays, Materaial : Cold rolled steel sider type, front saddles pivot for improved patch chord routing and organization comprehensive accesory kit for cable entry and fiber management and different adapter interfaces including ST,SC,FC,LC...

Supply and fixing of Fibay 1G-SFP85-SX-CI is compliant Cisco GLC-SX-MMD 1000 BASE-SX (Small form factor Pluggable) Ethernet links upto 550m over multi mode fitler. ..

Supply and fixing of Out Door Weather Proof Box 2Ft x 2Ft Out Door Weather Proof Box 2Ft x 2Ft with necessary accessories etc.,(For PoE Switch)

Supply, erection, testing and commissioning of 12 port Fibre switch with 8x 10/100/1000 TX RJ145 ports. 4x 10/100/1000 F SFP ports, manages Ethernet switch and meets the high reliability requirements . Using fiber port can extend the connection distance that increases the network flexibility and performance. ..

Supply and Fixing of Rack with Accessories -Higher end 9 U Rack with LNS unit and fan extra for the above rack.

Supplying, erection, testing and commissioning of splicing. ..

Supply and laying of armoured, Singlemode, Thermoplastic Tape Inner Sheathed, PVC type sheathed Single core Optical Fibre Cable with unique fiber excess length control method provides the cable with excellent mechanical and environmental properties and Cable - 2 Embedded FRP provides tensile strength & Anti-buckling properties. It is processed with Filling jelly - Thixotropic jelly to prevent Water ingress in loose tube.

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up

Supply,Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter.

Supply and fixing of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65 Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - Bosh) ..

Supply and fixing of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH)

Supply and fixing of 480W Power amplifier in a 3U high housing with 70V / 100V and 8 Ohm outputs, Dual inputs with priority switching, 100V input for slave operating on 100V speaker line, Mains, battery backup, with following features -Output ower (rms) 480W, - Frequency response 60 Hz to 18 kHz (+1 / -3 dB at -10 dB ref rated output) - Distortion <1% @ rated output power, 1 kHz, - S/N (flat at max volume) > 90 dB - Batter power supply 24 VDC (Make BOSCH) ..

Supply and installation of Handheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) ..

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & Player / Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth. ..

Pars Engineering India Private Limited (BID ID -1101394)

SUN CONSTRUCTIONS (BID ID -1101575)