REPAIRING AND PAINTING OF VARIOUS STEEL FURNITURE ITEMS ETC AT SEVOKE MIL STN UNDER GE SEVOKE ROAD

Amount

CHARPOY NYLON NEWAR GI PIPE 32 MM DIA (Drg No FD-220)

Taking out old unserviceable GI elbow from charpoy GI Pipe and S&F new GI Elbow 3-way 32mm dia medium grade ISI Marked complete all as specified and directed.

Taking out old unserviceable GI check nuts from charpoy GI Pipe and S&F new GI check nuts 32mm dia medium grade ISI Marked complete all as specified and directed.

Taking out old unserviceable MS clamps from charpoy GI Pipe and S&F new MS clamps for MNF set made out of mild steel flat iron of size 25x3mm made to shape and welded on the legs of charpoy GI Pipe complete all as specified and directed.

Taking out old unserviceable long rails from charpoy GI Pipe and S&F new rails made out of 32 mm dia medium grade GI Pipe duly threaded at both ends and fixed complete all as specified and directed.

Taking out old unserviceable short rails from charpoy GI Pipe and fixing only of short rails made out from old long rails obtained from Serial Item No 1.04 above duly threaded at both ends fixed complete all as specified and directed.

Taking out old unserviceable legs from charpoy GI Pipe and fixing only legs made out of long rails and short rails obtained from serial item No 1.04 & 1.05 complete duly welded MNF Set clamps of mild steel flat iron of size 25x3mm & 6mm thick MS plate at the bottom of legs complete all as specified and directed.

Removing of unserviceable nylon newar from charpoy GI Pipe, supply and fixing of new 12mm thick(7 Ply) Plywood, BWR grade ISI Marked of Size 1.98 meter x 0.90 Meter including providing 03 Nos of stiffener of size 900mmx50mmx6mm of MS flat iron of size 25mmX3mm duly welded with long rails with 90 degree bend at both ends at an appropriate distance so as to fit tightly against the inner walls of both long rails at an equal intervals to provide more strength to hard top . Necessary holes or perforation shall be made on GI Pipe (3 holes on each long rails, 02 holes on each short rails and 01 hole on each stiffener) and fixing with suitable size of screw/locknuts/and bolts as directed by Engr- in-Charge. Plywood shall be rounded off and suitably holed with rose bit to prevent head of nuts/bolts from protruding Out. All four corners bottom of plywood to be chiseled suitable sheared off to the extent to ensure housing of raised portion of elbow and check nuts if required to make the plywood sit flat on long rails evenly through out complete all as specified and directed.

Removing of old U/S Nylon Newar from Charpoy GI pipe and supply & reweaving Charpoy with 50-55mm wide new Nylon Newar (Non recycled) white in colour and weight of Newar shall not be less than 1.5Kg each Charpoy complete all as specified and as directed.

NOTE FOR ITEM NO. 1.03, 1.06 & 1.07 :- MS work shall be painted with two coats of synthetic enamel paint over one coat of red oxide primer and rates are deemed to be included in the unit rate.

CHARPOY PLYWOOD TOP GI PIPE 25MM DIA (Drg No FD-220 (R )

All as per item No 1.01 here-in before but GI elbow 3 way of 25 mm dia

All as per item No 1.02 here-in before but GI Check nut of 25 mm dia

All as per item No 1.03 here-in before but clamps for MNF set for charpoy GI Pipe 25 mm dia

All as per item No 1.04 here-in before but GI long rails for charpoy GI 25 mm dia

All as per item No 1.05 here-in before but short rails for charpoy GI 25 mm dia

All as per item No 1.06 here-in before but legs for charpoy GI 25 mm dia

Taking out old unserviceable plywood top from charpoy GI pipe 25mm dia and S & F new plywood top of 12mm thick(7 Ply) Plywood, BWR grade ISI Marked complete all as specified and directed.

Removing of old U/S Nylon Newar from Charpoy GI pipe and supply & reweaving Charpoy with 50-55mm wide new Nylon Newar (Non recycled) white in colour and weight of Newar shall not be less than 1.5Kg each Charpoy complete all as specified and as directed.

NOTE FOR ITEM NO. 2.03, 2.06 & 2.07 :- MS work shall be painted with two coats of synthetic enamel paint over one coat of red oxide primer and rates are deemed to be included in the unit rate.

CHAIR VERANDAH (Drg No FD-256,359)

M&L for electric welding in repair of dislocated 10mm dia MS rod to legs, length of welding exceeding 2.5cm but not exceeding 5 cm and thickness of metal to be welded not exceeding 6mm complete all as specified and directed. Note:- Each spot of welding shall be measured as one unit.

Taking out old unserviceable/damaged plastic cane from chair verandah and M&L for painting of old painted steel surface of frame of chair verandah with two coats of synthetic enamel paint and recanning the chair verandah with 4mm oval shaped half round white plastic cane complete all as specified and directed.

Removing of old unserviceable rubber shoes from chair verandah & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and directed.

ALMIRAH STEEL MED WITH SHELVES (Drg No. FD-67(m), 243,1032)

Taking out broken damaged handle of almirah steel med with shelves and S&F new brass chromium plated handle of approved quality (Godrej pattern) complete all as specified and directed.

Taking out old unserviceable locks from almirah steel med with shelves and S&F new brass locks of 6 levers with duplicate keys of approved quality complete all as specified and directed.

Taking out old u/s mild steel cleats and S&F new mild steel cleats as per existing size and shape complete all as specified and directed.

Repairs of door shutters hinges of almirah steel med with shelves by fixing dislocated hinges by welding. Length of each spot of welding exceeding 2.5 cm but not exc 5 cm, thickness of welding shall not be less than 6mm, with and including red oxide zinc chrome primer complete all as specified and directed.

Taking out unserviceable rusted legs of almirah steel med with shelves and S&F new legs made out of MS plain black sheet 1.6mm thick duly welded to bottom of almirah steel med with shelves, with and including red oxide zinc chrome primer complete all as specified and directed.

Taking out unserviceable rusted shelves of almirah steel med with shelves and S&F new shelves made out of MS plain black sheet 1mm thick with and including red oxide zinc chrome primer complete all as specified and directed.

M&L for painting to the almirah steel med with shelves with synthetic enamel paint olive green (internally & externally) two coats by spray painting duly scrapping out old dirt stain etc complete all as specified and directed.

Taking out old unserviceable locking arrangement 3 way and supply & fixing new locking arrangement made out of 10mm dia rod of required length of Almirah Steel Med complete all as specified and directed.

ALMIRAH STEEL LARGE W/SHELVES (Drg No. FD-67(m), 243,1032)

All as per Item No. 4.01 above but almirah steel large.

All as per Item No. 4.02 above but almirah steel large.

All as per Item No. 4.03 above but almirah steel large.

All as per Item No. 4.04 above but almirah steel large.

All as per Item No. 4.05 above but almirah steel large.

All as per Item No. 4.06 above but almirah steel large.

All as per Item No. 4.07 above but almirah steel large.

All as per Item No. 4.08 above but almirah steel large.

TABLE OFFICE OFFICER STEEL (Drg No. FD-1003)

Removing old broken damaged top of table office officer steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with standard PVC edging all around the top complete all as specified and directed.

Removing old unserviceable internal drawer locks from table office officer steel and S&F new internal drawer locks 40mm, 4 lever with duplicate keys of approved quality complete all as specified and directed.

Removing old broken unserviceable hard rubber shoes of table office officer steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing.

M&L for spray painting to table office officer steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

TABLE OFFICE CLERK STEEL (Drg No. FD-84)

Removing old broken damaged top of table office clerk steel and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white exterior grade with 19x4mm teakwood beading all around the top and polishing the wooden surfaces with French polish to the entire satisfaction of Engr-in-Charge subject to minimum two coats including necessary preparation of surfaces complete all as specified and directed.

Removing old unserviceable internal cupboard/drawer locks from table office clerk steel and S&F new internal locks 40mm 4 lever with duplicate keys of approved quality complete all as specified and directed.

Removing old broken unserviceable rubber shoes of table office clerk steel and S&F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel complete all as specified and directed.

M&L for spray painting to table office clerk steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

LOCKER STEEL (Drg No. FD-257 & TD/SZ/229, FD-1029)

Removing old broken damaged hasp & staples of locker steel and S&F new hasp & staples of size 150 mm long chromium plated to the shutters of locker steel complete all as specified and directed.

Removing old broken handle of locker steel and S&F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel complete all as specified and directed.

Removing old broken hanging rod of locker steel and S&F new hanging rod made out of mild steel 20mm dia chromium plated pipe 500mm long of locker steel complete all as specified and directed.

Removing old unserviceable locks of locker steel and S&F new locks 50mm 6 lever with duplicate keys complete all as specified and directed.

M&L for spray painting to locker steel internally and externally with synthetic enamel paint olive green two coats including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

All as serial item No 4.05 here-in before but legs of Locker steel.

TABLE DINING ORs (Drg No. FD-165(M)

Removing old broken damaged top of table dining ORs and S&F new top made out of 18/19mm thick pre-laminated particle board one side teak veneered & otherside balancing white, phenol formal dehyde exterior grade with 19x4mm thick teakwood beading fixed with headless nails all around the top complete all as specified and directed.

Taking out old unserviceable rusted components of table dining ORs and S&F the following new components 25mm square tube of 1.6mm thick MS sheet:-

Legs of table dining ORs 71 cm long

Long side rails of size 162cm long.

Short side rails of size 52 cm long.

Stiffener of size 47 cm long.

Stiffeners of size 158cm long.

M&L for running electric welding to the broken/dislocated broken frame of table dining Ors, length of welding exceeding 2.5cm but not exc 5 cm in length and thickness of metal to be welded not less than 6mm, complete all as specified and directed.

M&L for spray painting to all steel surface of table dining ORs with two coats of synthetic enamel black paint including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

CHAIR CBTS WITH ARMS (Drg No. FD-75(m)

Removing of old broken damaged wooden hand rest of chair CBTS with arm and S&F new hand rest made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish complete all as specified and directed.

Removing of old broken damaged seat frame of chair CBTS with arm and S/F new seat frame made out of 1st class hard wood (teak wood) well seasoned free from cracks knots & sapwood and polished with black powder polish with and including canning with new non-recycled 2mm wide white plastic cane half round oval shaped and beading with 3mm wide plastic cane half round, as per Godrej pattern (double vertical and single diagonal) complete all as specified and directed.

All as per item no 10.02 above but back frame of chair CBTS with arm

M&L for spray painting to steel frame of chair CBTS with arm with two coats of synthetic enamel paint olive green including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

Removing of old unserviceable rubber shoes from chair CBTS with arms & S&F new rubber shoes of approved quality & fixed at the bottom of legs with screw of chair CBTS with arms complete all as specified and directed.

Removing of old rusted flat iron strip and S&F mild steel FI strip of size 500mmX20mmX3mm & welded to the frame(at bottom) of chair CBTS with arms complete all as specified and directed.

CHAIR CBTS WITHOUT ARM (Drg No. FD-75(m)

All as per item No 10.02 here-in before but seat frame of chair CBTS without arm

All as per item No 10.03 here-in before but back frame of chair CBTS without arm.

All as per item No 10.04 here-in before but painting to steel frame of chair CBTS without arm.

All as per item No 10.05 here-in before but chair CB TS without arm .

All as per item No 10.06 here-in before but chair CB TS without arm .

TEAPOY VERANDAH (Drg No. FD-255)

Taking out old unserviceable top of teapoy Verandah and supply and fix new top made out of 18/19mm thick pre-laminated particle board one sideteak veneered & other side balancing white exterior grade on top including 19mm X 4mm thick teak wood beading all round the top and fixed with screws and polishing the beading with French polish ( to entire satisfaction of the Engineer-in-Charge ) after scrapping/smoothing the surface complete all as specified and directed.

M&L for spray painting to the steel frame of teapoy verandah with two coats synthetic enamel paint white including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

Removing of old u/s rubber shoes from teapoy verandah & S&F new rubber shoes of approved quality & fixed at the bottom of legs of teapoy verandah complete all as specified and directed.

TABLE 900 X900 X 760 MM STEEL (Drg No. FD-1009)

Removing of old unserviceable top of table 900 x900 x760 mm steel and S&F new top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19mm x 4 mm teak wood beading all around the top and polishing to wooden surfaces with French polish including preparation of surfaces by scrapping /smoothing the surface complete all as specified and directed.

M&L for spray painting to steel frame of table 900 x900x 760 mm steel by two coats of synthetic enamelled paint olive green colour including preparation of old painted surfaces by scrapping out old dirt stains etc complete all as specified and directed.

M&L for electric welding to the broken /dislocated 25 x 25 mm square tube rails of tables 900 x900x 760 mm steel , length of welding exceeding 2.5 cm but not exceeding 5 cm ( each spots measured separately) thickness of metal to be welded not less than 6 mm , complete all as specified and directed.

Removing old unserviceable rubber shoes from the legs of table and S&F new rubber shoes of approved quality and tightly fitted to the bottom of legs complete all as specified and directed.

TABLE 900 X600 X 760MM WITH DRAWER STEEL (Drg No. FD-1007 & FD-1008)

All as per item no. 13.01 here-in-before but for table steel 900x600x760mm with drawer.

All as per item no. 13.02 here-in-before but for table steel 900x600x760mm with drawer.

All as per item no. 13.03 here-in-before but for table steel 900x600x760mm with drawer.

All as per item no. 13.04 here-in-before but for table steel 900x600x760mm with drawer.

BOX KIT STEEL (Drg No. FD-98 (m)

Taking out old unserviceable hasp & staple from box kit steel and S&F new hasp & staple 150x3mm thick of approved quality complete all as directed and shown on drawing.

M&L for spray painting to box kit steel internally and externally with two coats of synthetic enamel black paint including preparation of surface by scrapping, de-rusting old dirt stains etc. complete all as specified and directed.

BOOK CASE STEEL (Drg No. FD-90 (m)

Removing of old damaged glass shutter including locks & handle from book case steel and S&F new sheet glass 4.00mm thick & brass lock of approved quality and repairing of shutter frame glass and rolling accessories before fixing of glass shutter complete all as specified and directed.

M&L for spray painting of complete steel surface inside and outside of book case steel with a coat of synthetic enamel paint (Olive green colour) after complete removal of old paint by scrapping complete all as specified and directed.

Removing of old unserviceable handle of book case steel and S&F new chromium plated handle of approved quality all as specified and shown on drawing complete all as specified and directed.

RACK ADJUSTABLE 3 TIER STEEL (Drg No. FD-106(m), FD-1038)

Removing of old paints completely by scraping from the entire steel surface of rack adjustable 3 tier and applying two coats of synthetic enamel paint olive green (internally & externally) by spraying machine complete all as specified and directed .

RACK ADJUSTABLE 6 TIER STEEL (Drg No. FD-106(m)

All as per item no 17.01 here-in-before but for rack adjustable 6 tier steel.

Charpoy IP HARD TOP ( Drg No.- FD Map-II/01 )

M&L for mild steel square pipe of size 25 x 25 sqmm thick 16 gauge two in numbers in each charpoy equally placed in between of both long rails properly welded at both ends with curved edges and placing two holes in each for supporting plywood top including taking down old unserviceable complete all as specified and directed.

M&L for 25 x60 x6mm MS Cleat of with min length of 150mm Six in numbers in each charpoy placed of both long & Short rails properly welded and placing one hole in each for supporting plywood top complete all as specified and directed.

M&L for spray painting for Charpoy IP Hard Top after finishing the surface with one coat of synthetic enamel Black paint complete all as specified and directed.

Taking out old and unserviceable plywood top and S & F new plywood top 12mm thick(7 Ply) Plywood, BWR grade ISI Marked. Top to be fitted with nut and bolt after drilling hole in square tube and plywood, nut bolt in each top complete all as specified and directed.

Charpoy plywood top GI pipe 32mm with (Drg No.- FD-220)

Taking out old unserviceable long rails from charpoy GI Pipe and S&F new rails made out of 32 mm dia medium grade GI Pipe duly threaded at both ends and fixed complete all as specified and directed.

Taking out old unserviceable short rails from charpoy GI Pipe and fixing only of short rails made out from old long rails obtained from Serial Item No 20.01 above duly threaded at both ends fixed complete all as specified and directed.

Taking out old unserviceable legs from charpoy GI Pipe and fixing only legs made out from long rails and short rails obtained from serial item No 20.01 & 20.02 complete including welded MNF Set clamps of mild steel flat iron 25mmX3mm & 6mm thick MS plate at the bottom of legs complete all as specified and directed.

Taking out old unserviceable GI elbow from charpoy GI Pipe and S&F new GI Elbow 3-way 32mm dia medium grade ISI Marked complete all as specified and directed.

Taking out old unserviceable GI check nuts from charpoy GI Pipe and S&F new GI check nuts 32mm dia medium grade ISI Marked complete all as specified and directed.

Removing of existing unserviceable plywood top from charpoy GI Pipe, supply and fixing of new 12mm thick(7 Ply) Plywood, BWR grade ISI Marked as per existing size and shape complete all as specified and directed.

M & L for gas welding to the mild steel stiffener attached to the frame of charpoy G.I pipe with plywood top including preparation of surface and removing unwanted welding spot all as directed by Engr-in-Charge.

Chair Verandah JCO/ ORs (Drg No-FD/MAP-II/06)

Removing of existing unserviceable plastic seat and back of Chair Varandah and painting the frame with synthetic enamel paint white two coats or more complete all as specified and directed.

Removing of old unserviceable rubber shoes from chair verandah & S&F new rubber shoes of approved quality & fixed at the bottom of legs of chair verandah complete all as specified and directed.

Form with back steel (Drg No FD-78(M)

Taking out old damaged seat plank of form with back and supply & fixing new seat plank made with 2nd class hard wood (SAL)complete all as specified and directed.

Painting to all exposed steel surface of Form with back with one coat of synthetic enamel paint complete all as specified and directed.

Supply and Fixing New Rubber shoe of form with back

Form without back (Drg No FD-77 (M)

Taking out old damaged seat plank of form without back and supply & fixing new seat plank made out of 2nd class hard wood (SAL) complete all as specified and directed.

Painting to all exposed steel surface of form without back with one coat of synthetic enamel paint complete all as specified and directed.

Supply and Fixing New Rubber shoe of form without back complete all as specified and directed.

Desk Steel

Taking out old broken damaged wooden box of desk steel and supply/ fixing new wooden box of desk steel made out of 1st class seasoned Teak wood complete all as specified and directed.

Painting to all exposed steel surface of Desk Steel with one coat of synthetic enamel paint complete all as specified and directed.

Supply and Fixing New Rubber shoe of Desk Steel complete all as specified and directed.

JSM FURNITURE

M/S BOSE CONSTRUCTION

M/S HARMANS

M/S B K ROY

M. K. ENTERPRISES

SHRI R N SAHA

SRI SURAJIT SENGUPTA