Installation and commissioning of conveyor belts in RVIIB seam for LHCM 1 package of CM at Nakraonda kuamrdihi B colliery under Bankola Area

Amount

Installation and commissioning of 1000mm wide X 494 mtr conveyor belt in Panel No-PB7,-9D/-13L TO 9D/-13L of RVIIB seam of CM project at Nakrakonda Kumardihi-B Colliery under Bankola Area

Transportation and installation of complete drive drum, driven drum with gear motor base frame -10.5MT+discharge unit- 2.5MT +tail end -1MT+Load table-1MT+loop take dp with tension trolley drum-3.60MT+Fix unit -1MT+motor, winch starter and switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-494mtr @68Kg/mtr = 33.59MT+5 times Tail end shifting (extension)-5MT= total weight =60.19 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning, trail run etc

Foundation, bolting for fitting of drive unit, discharge unit, loop take up and tail end etc =120nos

Cleaning of coal and unused materials before installation job

Fencing of drive ,loop take up and tail end

Making vertical support from roof and floor for hanging the conveyor structure from drive head to discharge by welding, gas cutting etc. considering cost of consumables.

Dismantling of complete drive drum driven drum with gear motor base frame -10.5MT +discharge unit-2.5MT+tail end -1MT +loop take up with tension trolley drum-3.60MT+Fix unit-1MT+load table 01nos-1MT+ motor, winch starter and switch and cables etc. -2MT+1000mm wide conveyor structure with top,bottom roller and foot stool-480mtr @68Kg/mtr =32.64 MT+Tail end shortning 5 time-5MT= total weight = 59.24 MT

Taken out and coiling of belt

Cost of M.S. Nut bolts and washers

Cost of Belt fastener/joint E-35 Comb and grip type suitable for Mato make machine available in mines

Drive base frame, Loop take up base and discharge base cement concrete

Installation and commissioning of 1000mm wide X 104 mtr conveyor belt in Panel No-PB7,-13L/-1D TO -17L/-1D of RVIIB seam of CM project at Nakrakonda Kumardihi-B Colliery under Bankola Area.

Transportation and installation of complete drive drum, driven drum with gear motor base frame -10.5MT+discharge unit-2.5MT+tail end -1MT+Load tale-1MT+loop take up with tension trolley drum-3.60MT+Fix unit-1MT+motor, winch starter and Switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-104mtr @68Kg/mtr=7.07MT+1 times Tail end shifting (extension)-1MT= total weight =29.67 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning,trail run etc

Foundation, bolting for fitting of drive unit, discharge unit, loop take up and tail end etc =120nos

Cleaning of coal and unused materials before installation job

Fencing of drive ,loop take up and tail end

Making vertical support from roof and floor for hanging the coveyor structure from drive head to discharge by welding, gas cutting etc. considering cost of consumables.

Dismantling of complete drive drum driven drum with gear motor base frame -10.5MT+discharge unit-2.5MT+tail end -1MT+loop take up with tension trolley drum -3.60MT+Fix unit-1MT+Ioad table 01nos-1MT+ motor, winch starter and switch and cables etc.-2 MT+1000mm wide conveyor structure with top,bottom roller and foot stool-100mtr @68Kg/mtr =6.8MT= total weight = 28.4MT

Taken out and coiling of belt

Cost of M.S, Nut bolts and washers

Cost of Belt fastener/joint E-35 Comb and grip type suitable for Mato make machine available in mines

Drive base frame, Loop take up base and discharge base cement Concrete

Installation and commissioning of 1000mm wide X 104 mtr conveyor belt in Panel No-PB7,-13L/3D TO -17L/3D of RVIIB seam of CM project at Nakrakonda Kumardihi-B Colliery under Bankola Area

.Transportation and installation of complete drive drum, driven drum with gear motor base frame -10.5MT+discharge unit-2.5MT+tail end -1MT+Load tale-1MT+loop take up with tension trolley drum-3.60MT+Fix unit-1 MT+motor, winch starter and switches cables etc -2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-104mtr @68Kg/mtr=7.07 MT+1 times Tail end shifting (extension)-1MT= total weight=29.67 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning,trail run etc

Foundation, bolting for fitting of drive unit, discharge unit, loop take up and tail end etc =120nos

Cleaning of coal and unused materials before installation job

Fencing of drive loop take up and tail end

Making vertical support from roof and floor for hanging the conveyor structure from drive head to discharge by welding, gas cutting etc. considering cost of consumables.

Dismantling of complete drive drum driven drum with gear motor base frame -10.5MT+discharge unit-2.5MT+tail end -1MT+loop take up with tension trolley drum-3.60MT+Fix unit- 1MT+Ioad table 01nos-1MT+ motor, winch starter and switch and cables etc.-2MT+1000mm wide conveyor structure with top, bottom roller & foot stool-100mtr @68Kg/mtr =6.8MT= total weight = 28.4MT

Taken out and coiling of belt

Cost of M.S. Nut bolts and washers

Cost of Belt fastener/joint E-35 Comb and grip type suitable for Mato make machine available in mines

Drive base frame, Loop take up base and discharge base cement concrete

Installation and commissioning of 1000mm wide X 104 mtr conveyor belt in Panel No-PB7,-13L/6D TO -17L/6D of RVIIB seam of CM project at Nakrakonda Kumardihi-B Colliery under Bankola AreaTransportation and installation of complete drive drum, driven drum with gear motor base frame -10.5MT +discharge unit-2.5MT+tail end -1MT+Load tale-1MT+loop take up with tension trolley drum-3.60MT+Fix unit-1MT+motor, winch starter and Switches cables etc-2.0MT+1000mm wide conveyor structure with top, bottom roller and foot stool-104 mtr @68Kg/mtr =7.07MT+1 times Tail end shifting (extension)-1MT= total weight=29.67 MT

Fitting of tail end and discharge scraper.

Belt laying including transporting of belt, jointing, tensioning, trail run etc

Foundation, bolting for fitting of drive unit, discharge unit, loop take up and tail end etc =120nos

Cleaning of coal and unused materials before installation job

Fencing of drive loop take up and tail end

Making vertical support from roof and floor for hanging the conveyor structure from drive head to discharge by welding, gas cutting etc. considering cost of consumables.

Dismantling of complete drive drum driven drum with gear motor base frame -10.5MT+discharge unit-2.5MT+tail end-1MT+loop take up with tension trolley drum-3.60MT+Fix unit-1MT+load table 01nos-1MT+ motor, winch starter and switch and cables etc.-2 MT+1000mm wide conveyor structure with top,bottom roller and foot stool-100mtr @68Kg/mtr =6.8MT= total weight = 28.4MT

Taken out and coiling of belt

Cost of M.S. Nut bolts and washers

Cost of Belt fastener/joint E-35 Comb and grip type suitable for Mato make machine available in mines

Drive base frame, Loop take up base and discharge base cement concrete

Total impact of GST for the purpose of CTC

SWAPAN KUMAR AKHULI (BID ID -1161632)