SPECIAL REPAIR TO CERTAIN BLDGS OF PRTC AND PARA RECORDS UNDER GE (NORTH) BANGALORE

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Dismantling of framed trusses of steel or iron span not exc 10m each complete all as specified and as directed

Dismantling of unframed work of timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed

Dismantling of unframed work as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and as directed

Dismantling of Asbestos cement (Plain, corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed

Demolition of brick wk or stone/boulders masonary built in cement mortar including all quoins arches pillars etc but excluding ashlar facing, dressed stones work and precast concrete articles complete all as specified and as directed

M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) with Fe 410 -W (Gde- E- 250) quality-A including distance pieces, cleats etc. complete all as specified and as directed

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, grade Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, 150AZ, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, 150AZ, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Anodised aluminium snap grid frame work of grid size 605 x 605mm for false ceiling including 4mm thick non asbestos fibre cement building boards laid flat fixed or laid/ inserted to timber/GI/Aluminium frame work with screws including taking down old celing of any description complete all as specified and directed.

M & L for Pre-cast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in solid block masonry exc. 10cm in width and setting in cement mortar (1:6) complete all as specifid and as directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposal of debris out side MD land all as specified and as directed.

M&L for Rendering 15mm thick cement mortar (1:6) on brick or concrete surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering on other than fair faces of brick work or concrete surfaces, 15mm thick cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement all as specified and as directed. Note :- WPC will be measured and paid separately

M&L for Rendering 5 mm thick cement mortar (1:3) on ceiling concrete surfaces finished even and smooth without using extra cement all as specified and as directed

M&L for Preparation of new plastered ceiling surfaces including in narrow widths/ bands etc and applying three coats of white wash complete all specified and as directed.

M & L for Preparation of newly plastered surfaces of wall / chajjas etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof exterior primer including filling the minor cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

M & L for Preparation of newly plastered wall surfaces including in narrow widths/ bands etc and applying two coats of Acrylic emulsion distemper over a coat of self primer complete all specified and as directed.

M & L for Preparation of newly plastered walls surfaces including in narrow widths/ bands etc and applying three coat of white wash complete all specified and as directed.

M & L for Complete removal of existing treatment on walls including narrow widths/ bands etc of any description and applying two coats of Acrylic emulsion distemper over a coat of alkali resistant primer complete all specified and as directed.

M & L for Complete removal of existing treatment on wall surfaces chajjas etc of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots, including filling the minor racks etc with crack filling material all as per manufacturers instructions etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof exterior primer complete all as specified and as directed.

M & L for Preparation of old decorated wall surfaces and applying one coat of white wash etc complete all specified and as directed.

M & L for Preparation of old decorated ceilings surfaces and applying one coat of white wash complete all specified and as directed.

Taking down chowkat (without taking of shutter from the frame) exc 1.50 sqm and not exc 4.00 sqm each including making good to match with adjoining surfaces all as specified and directed

S&F Pressed steel frames of size 125 x 60 mm for doors, made of 1.25mm thick M S sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S & F Second class hard wood Plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venereed particle board with commercial veneering on both faces, rail and style are of 2nd class hardwood & the size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treateds fixed to chowkhat all as specified and as directed.

S & F Second class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed (Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately).

M & L for Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

M & L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), wood free EPS , with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame at site as per specification complete all as specified and directed.

M & L for plain cement concrete (1:3:6) type C-0 using 12.50mm grade stone aggregate for filling in steel door frame complete all as specified and as directed

Supply & fixing stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple complete all as specified and as directed

S & F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S & F Aluminium handle 150 mm size, cast type, anodised etc complete all as specified and as directed

S & F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed .

S & F mild steel ordinary rat tail rod pattern spring 300mm long including roller and roller plate complete all as specified and as directed

S & F Butt hinges medium weight, stainless steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed

S&F Aluminium handle 125mm long , cast type, anodised etc complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod 20mm dia bore with wood finishes (weight not less 300 gms per running meter) including fancy finale caps cap etc complete all as specified and as directed

S&F in repair Bracket suitable for curtain rod 20mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws minimum 2 Nos with Rawl Plug of size not less than 50 mm long including wooden base etc complete all as specified and as directed

M & L for Preparation of old painted/ treated steel and iron surface over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M & L for Preparation of new steel and iron surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

M&L for preparing old wooden surface of any description, not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spesified.

M & L for Glazed coloured ceramic tiles in vertical surfaces 350 x 250x 7 mm / 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 10mm thick in backing coat in cement mortar (1:4) on brick work or concrete surfaces to receive wall tiles including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spesified.

S & F coloured non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spesified.

M & L for vitrified ceramic tiles 8 to 10mm thick (square/ rectangular) dark shade, area of each tile not exceeding 0.36 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar (1:6) including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spesified & directed.

M & L for machine cut kota stone slab 20 to 25mm thick in treads of steps in stair laid and jointed with white cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing laid over 20mm thick screed bed in cement mortar (1:6) including dismantling of old slab complete all as spesified & directed.

M & L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, riser, skirting ,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , including cutting and polishing laid on 15 mm thick screed bed in CM (1:6) set and jointed including dismantling of old stone slabs laid bedded and pointed in any mortar complete all as specified & directed.

M & L for Edge moulding to 18-20mm thick granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified & directed.

M & L for Plain cement concrete (1:2:4 ) type B-1 using 20mm graded stone aggregate as in 25 mm thick levelling course complete all as specified & directed.

Demolition of RCC in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and as directed.

M & L for Reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, nominal mix as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for Reinforced cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, nominal mix as in column, pillars, post or similar work complete all as specified and as directed.

M & L for TMT bars, 10mm dia and over in section, cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for TMT bars 5mm dia & over upto 10mm dia as in stirrups, spacers, binders cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished flat surfaces complete all as specified and as directed.

M & L for Form work to sides of pillars, columns, post etc fair finished square, rectangular or polygonal surfaces complete all as specified and as directed.

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in 75 mm thick plinth protection including joints filling with sealing compound Grade "A" all as specified and as directed.

M & L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000ltr capacity, three layered, fixed in position including PTMT Nipple 02 Nos i.e 1-20mm dia & 1-25mm dia (Minimum weight 20mm-45gms, 25mm-65gms) suitable for HDPE water tank and Brass float valve 25mm dia bore including taking down broken tank complete all as specified in SSR Part I and as directed

Dismantling water tanks exc 250 and not exc 500 ltr capacity complete all as specified and as directed.

M & L for rotational moulded water storage tanks 500ltrs capacity, triple layered, polyethylene (cylindrical vertical with closed top) hoisting and fixed in position on roofs including PVC ball valve 20 mm dia including PTMT Nipple 02 Nos i.e 1-20mm dia & 1-25mm dia (Minimum weight 20mm-45gms, 25mm-65gms) and fittings complete all as specified & directed.

Supply & laying CPVC pipes 20 mm outer dia SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified & directed.

Supply & laying CPVC pipes 25 mm outer dia SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified & directed.

S & F in repairs CPVC gate valves 25mm dia bore, with lever , screwed both ends for iron pipe and fixed complete all as specified & directed.

S & F in repair kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets, connecting union pipes and waste pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specified & directed.

S&F in repairs Bib tap, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia bore and fixed complete all as specified & directed.

S&F in repair Vitreous China wash basin, white colour, size 550x400mm including 32 mm dia brass waste coupling, swan neck pillar tap brass chromium plated fancy type, PVC waste pipe, PVC connection 15mm dia 600 mm long with PTMT nuts & C I brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified & directed

S&F in repair Vitreous china wash down water closet pan (pedestral Pattern), white, connecting to flush pipe, flushing cistern etc including following items complete all as specified & directed :- (i) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (ii) PVC valveless, syphonic action type, flushing cistern 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets (iii) PVC connections 600mm long 15mm size with PTMT nuts

S&F in repairs Vitreous China half stall urinal flat back, white (minimum), with grating and union for discharge pipe including following items complete all as specified & directed :- (i) Concussive push button taps of cast copper alloy 15mm dia bore (ii) Waste coupling of PTMT (half or full threaded) Minimum weight 32mm -45gms (iii) Urinal spreader of PTMT any colour 15 mm dia pipe Minimum weight 60gms (iv) PVC connection 15mm dia 450 mm long withg PTMT nuts (v) PVC waste pipe

S&F in repairs stop valves/ angle valves cast copper alloy, chromium plated, fancy type, screwed down, high pressure, screwed both ends for iron pipe 15mm dia bore or for unions complete all as specified & directed

S&F in repairs stop valves/ angle valves cast copper alloy, chromium plated, fancy type, long shank and cup (concealed type) screwed down, high pressure, screwed both ends for iron pipe 15mm dia bore or for unions complete all as specified & directed

S&F in repairs two way bib cock with angle valve combination, brass chromium plated fixed to 15mm dia bore iron pipe complete all as specified & directed

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including taking down old faucet complete all as specified & directed

S & F in repairs Towel rail stainless steel glossy finish 600mm long complete all as specified and as directed.

S&F in repairs Soap dish, brass, chromium plated fixed in wall as per manufacturers instruction complete all as specified and as directed.

S&F in repairs Toilet paper holder with flat recessed type, stainless steel Complete all as specified and directed.

S&F in repairs shower rose 125mm dia, Brass Chromium plated , with swivel joint, fixing to steel pipe 15mm or union, complete all as specified and as directed.

Taking down of existing Water Proofing treatment of any type (APP Membrane,Cement or earthen tile, Mud phuska or lime concrete) including cement plaster of any thickness and removing bitumen coating/mud pushka dirts etc from original RCC roof slab by grinding, Picking, sweeping clean and washing down with water to remove dust to providing water prooling treatment including removing debris outside defence land complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L for Providing cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and as directed.

M&L for bedding/plaster 10 mm thick in cement mortar (1:3) mixed with WPC, finished surface to even and smooth without using extra cement Note :- WPC will be measured and paid separately layer of mortar plastered surface even and smooth without using extra cement all as specified and as directed.

M& L for water proofing treatment with APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed.

S & F in repairs PVC(SWR) floor trap, 75mm dia outlet plain with grating including jointing with solvent cement all as specified and as directed.

S & F in repairs PVC (SWR) pipes 75mm dia bore single socketed in any length with rubber ring joints fixed to walls / laid in trenches including necessary fittings all as specified and as directed.

S & F in repairs PVC (SWR) pipes 110mm dia bore single socketed in any length with rubber ring joints fixed to walls / laid in trenches including necessary fittings all as specified and as directed.

S & F in repairs 75mm dia PVC (SWR) Bends of any radius all as specified and as directed.

S & F in repairs 110mm dia PVC (SWR) Bends of any radius all as specified and as directed.

S & F in repairs Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, alround 6mm th teak fillets fixed in kitchen Cabinet or cupboards all as specified.

M&L for Second class hardwood Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter including taking down old fillets exc 6 & n exc 13 sqcm cross section area all as specified and directed.

S&F Continuous (piano) hinges 30mm width of flaps (when open) , mild steel bright finish or electro galvanised all as specified and directed.

S&F in repairs Hasp and staple 100 mm size, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S & F Magnet door catcher made of stainless steel complete all as specified and directed

S & F Cup-board knob 40 mm dia, brass polished fixed with nut, screw and washer of complete all as specified and as directed.

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and finished to match with adjoining surfaces all as specified and directed

M & L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all as specified & directed. (Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately)

M & L for powder coated aluminium grill ( powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame, weight n. less than 3.26kg/sqm, with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and as directed

S&F Anodised aluminum powder coated (of any shade / colour as approved by GE) ventilators of Size 500 x 800 mm, with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed. (Note : Quoted rate deemed to be included the Glass & wire guage)

Supply & Fixing sheet glass 4mm thick, ordinary quality and glazing with rubber packing around the glass, in squares exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply & fixing stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple complete all as specified and directed.

Dismantling of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in 75 mm thick subbase to floors, laid in penels including necessary formwork complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments laid over & including screed bed or bedding layer 20mm thick CM (1:6) complete all as specified and directed.

Material and labour for rendering 15 mm thick cement mortar (1:4) on bricks or concrete surfaces an d finished even and smooth without using extra cement complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and 1.5m deep and getting out in hard/dense soil for fundation and smilar work complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramning in layers not exc 25 cms thick complete all as specified and directed.

Removing the excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m high from the starting point complete all as specified and directed.

M & L for Plain Cement Concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channel all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for Pre-cast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in solid block masonry exc. 10 cm in width and setting in cement mortar (1:4) complete all as specified and as directed

M&L for rendering 10 mm thick cement mortar (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

Excavation in trenches not exc 1.5m wide and exc 1.5m deep but not exc 3 mtr deep and getting out in hard/dense soil for fundation and smilar work.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortar 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor 200 mm internal dia of pipe complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for rendering 10mm thick cement mortar (1:4) mixed with water proofing compound as per manufactures instructions on fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Supply only for WPC will be measured and paid seperately)

Supply only liquid water proofing compound, ISI marked as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 300 mm dia bore drain pipes including packing under and haunching against the side and tested complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 200 mm dia bore drain pipes including packing under and haunching against the side and tested complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 150 mm dia bore drain pipes including packing under and haunching against the side and tested complete all as specified and as directed

M&L for Double wall corrugated polyethelene (DWCPE) 300 mm dia drain pipes , class SN-4 conforming to IS 16098 (part-2) in 6 mtr length laid in trenches with couplers complete all as specified and as directed

M&L for Double wall corrugated polyethelene (DWCPE) 200 mm dia drain pipes , class SN-4 conforming to IS 16098 (part-2) in 6 mtr length laid in trenches with couplers complete all as specified and as directed

M&L for Double wall corrugated polyethelene (DWCPE) 150 mm dia drain pipes , class SN-4 conforming to IS 16098 (part-2) in 6 mtr length laid in trenches with couplers complete all as specified and as directed

M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, benching of manholes and similar work etc complete all as specified and as directed

M&L for plain Cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate in surface channels and drains complete all as specified and as directed

M&L for Pre-cast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab for man hole, set in CM (1:4) all as specified and as directed

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 300 mm internal dia of pipe complete all as specified and directed.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc to match with adjoining surfaces complete all as specified and as directed.

M & L for Concealed Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories including GI/ MS branded sunken boxes of suitable module concealed in walls including modular frame and cover of suitable module fixed with hylam plated with cadmium iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for the following :-

One light point controlled by one switch

One fan/exhaust point controlled by one switch/regulator

One 3 pin socket out let 5 Amps on independent board

One bell / buzzer point controlled by bell push

One 3 pin socket out let 5 Amps on same board

M & L for Concealed Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked with accessories concealed wiring incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with hylam plate with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Note for Item No 135 & 136 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to wall for concealed conduit wiring is deemed to be included in the quoted rate.

S&F in repairs LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing fitted with engg plasticend caps, opal diffuser, integrated LED channel complete with all accessories including taking out old fittings all as specified and directed.

S&F in repairs LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as specified and directed.

S&F in repairs Recess mounted LED Luminaire 2' x 2' size, 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover, opal diffuser fixed in seperate CRCA sheet frame complete with all accessories all as specified and directed.

Supply & fix in repairs Modular switch 1 way 6Amps,1 module all as specified and directed.

Supply & fix in repairs Modular switch 1 way 16Amps, 1 module all as specified and directed.

Supply & fix in repairs Modular switch 2 way 6Amps ,1 module all as specified and directed.

Supply & fix in repairs Modular Bell push 6Amps, 1 module all as specified and directed.

Supply & fix in repairs modular Socket, 6Amps - 2/3 pin combined 2 module all as specified and directed.

Supply & fix in repairs modular Socket 6A/16A - 2/3 pin combined 2 module all as specified and directed.

Supply & fix in repairs modular type Fan step regulator, 120Watts - 2 module all as specified and directed.

S & F in repairs MCB SPN 240 volts 32 Amps, C curves complete all as specified and as directed

S&F MCB single pole 240 volts 6 to 32 Amps, C curves complete all as specified and as directed

S&F in repairs MCB TPN 415 volts 63 Amps, C curves complete all as specified and as directed

S&F in repairs MCCB 100 Amps, 16 KA, 4 pole 415 volts fixed type complete all as specified and as directed

S&F in repairs MCB Distribution board SPN 8 way, double door type, 240 volts with 200 Amps rated busbar all as specified and as directed.

S&F in repairs Vertical Distribution board, TPN 6 way suitable for MCCB 100 Amps as incoming, double door type 415 volts, IP-54 protection, door earthing, isolated neutral bar, mechanical impact strength IK 09 with insulated bus bar assembly all as specified and as directed.

S&F in repairs ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

S&F in repairs Ding Dong bell, AC 230 volts, single pole all as specified and as directed

M&L in repairs sub main wiring with two runs of single core 4 Sqmm along with one run 4 Sqm PVC insulated FRLS single core multistranded copper conductor cable as earth continuity 1100 volts grade with & including suitable size PVC conduit all as specified and as directed. (Note : Three run of 4sqmm cable and one run of PVC conduit altogether measured as one unit)

M&L in repairs sub main wiring with two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor 1100 volts grade multistranded FRLS copper conductors with & including suitable size PVC conduit all as specified and as directed (Note : Three run of 6sqmm cable and one run of PVC conduit altogether measured as one unit)

M&L in repairs for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including necessary earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast RCC slab 40mm thick in (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways including funnel with GI medium grade watering pipe, GI light grade protection pipe,wire mesh and lugs, including test point complete all as specified and as directed.

Supply & fix in repairs and fixing in repair LED bldg security light fitting, 30 Watts, with epoxy powder coated high pressure die cast aluminium housing with weather proof gasket for lamps and control gear accessories, prismatic polycarbonate difuser with IP 66 protection. luminaire is wired with inbuilt driver with 5kV surge protection including taking out old fittings all as specified and as directed

S&Fin repairs Bracket made out of GI tubing medium grade 25 mm dia bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

S&F in repairs Single pole & neutral enclosure 20 Amps & 240 Volts with two pin and earth plug and socket complete with one single pole MCB 20Amps C curves complete all as specified and directed.

Taking down ceiling fan, dismantling blades, cleaning, greasing etc and refixing back to its original position complete all as specified and directed.

S&F Exhaust fan 300 mm sweep with louvers, AC single phase 230/ 240 Volts, fixed with all accessories, fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as specified and directed.

S&F Exhaust fan 450 mm sweep with louvers, AC single phase 230/ 240 Volts, with all accessories, fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and directed.

M&L excavation in trenches in hard / dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.

M&L for sand cushioning with a layer of river sand 23 cm thick under and above the cable all as per Para 19.75 of SSR Part-I complete all as specified and as directed (Note : Punned thickness will be measured & paid)

Supply & laying sub class 'B' burnt bricks for cable protection all as per Para 19.75 of SSR Part-I complete as specified as directed

Supply & laying, testing of XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 35 Sqmm, 3.5 core laid in trenches/wall including taking down un-serviceable cable complete as specified as directed

Supply & laying, testing of XLPE insulated, sreened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 votls grade, cross sectionl area 95 Sqmm, 3.5 core laid in trenches including taking down un-serviceable cable complete all as specified as directed

Supply & laying, testing of XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches/wall including taking down un-serviceable cable complete as specified as directed

S&F in repair Galvanised iron tubing, light grade 32 mm bore with all fitting laid in trenches / walls / Roads for cable protection all as specified as directed

M&L for Bus bar chamber, Wall/Angle mounted, copper busbar with sheet metal enclosure box, outdoor type of suitable size for 6 way, 4 pole, 50 Hz, 415Volts of capacity 200 Amps including PCC work complete all as specified and directed. (Havells Model No IHBC025006 or equivalent make in Standard/ Indoasidan.

S&F in repairs Galvanised Iron tubing, medium grade 50 mm dia bore with all fitting laid in trenches/walls/Roads complete all as specified and directed.

S&F in repairs Galvanised Iron tubing, medium grade 25 mm dia bore with all fitting laid in trenches/walls/Roads complete all as specified and directed.

S&F in repairs Galvanised Iron tubing, medium grade 20 mm dia bore with all fitting laid in trenches/walls/Roads complete all as specified and directed.

S&F in repairs Gun metal Gate valve of size 50 mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun metal Gate valve of size 20 mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type complete all as specified and directed.

PRACHANIVA CONSTRUCTIONS (BID ID -3380223)

M/s BHOOMI ELECTRICALS (BID ID -3380601)

ANTTARANGNI INTERIOR (BID ID -3365763)

PATEL CONSTRUCTION (BID ID -3381043)

EURO ENTERPRISES (BID ID -3379669)

B5BUILDING SOLUTIONS (BID ID -3366646)

PRAGATHI BUILDERS (BID ID -3379045)