Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.4 L+₹3.7 L (14.6%)Rejected-Finance | L2 | Rejected-Finance Quoted other than lowest rate. | |
| 3 | L3₹29.7 L+₹4.0 L (15.7%)Rejected-Finance | L3 | Rejected-Finance Quoted other than lowest rate. | |
| 4 | L4₹29.9 L+₹4.2 L (16.3%)Rejected-Finance 18969 A 1 SHRI GURU TEG BAHADUR NAGAR BIBIWALA ROAD STREET NO 15 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Quoted other than lowest rate. | |
| 5 | L5₹31.1 L+₹5.4 L (21.0%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L5 | Rejected-Finance Quoted other than lowest rate. |
Tender Value
₹50.0 L
EMD Value
₹1 L
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE NORTH BATHINDA BATHINDA MIL STN PIN-151004
REPAIR TO JOINERY WORK TO CERTAIN BLDGS ZONE A AND M, MANOJ PANDEY AND JOGINDER SINGH ENCLAVE AND COMPREHENSIVE MAIN TO GURNAM SINGH ENCLAVE AREA UNDER AGE BR-V OF GE NORTH BATHINDA AT BATHINDA MIL STN
2022_MES_561670_1
8937/NIT-55/22-23
Open Tender
Civil Works
Item Rate
240 days
GE NORTH BATHINDA
Class D category a(i)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹1 L
Yes
14 Dec 2022
5 Nov 2022
28 Nov 2022
5 Nov 2022
26 Nov 2022
21 Nov 2022
5 Nov 2022 - 12 Nov 2022
Amount
SCHEDULE 'A' B/R Works
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.
Taking down shutters only of any description area not exceeding 1.0 sqm each and removing from site complete all as specified and as directed by Engineer-in- charge.
Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and removing from site complete all as specified and as directed by Engineer-in- charge.
Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in- charge.
Resecuring, easing and adjustments of shutters (any description and any size of shutter upto 4 Sqm each) without taking down from chowkhat/frame including oiling, tigtening of screws, minor repairs, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc complete all as specified and as directed by Engineer-in- charge. Note :- Screws if required for adjustment of fittings the cost of screws shall be included in the unit rate.
Supply and fixing in repair new Beads, straight (any size as per existing) for glazed or gauzed joinery, renewed, including mitres etc. made out of 2nd class hard wood and removing old beads including painting work to match the existing complete all as specified and as directed by Engineer-in-charge.
Supply and fixing factory made 105 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including making good disturbed wall surface (brick and plastering work) complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ.
Supply and fixing factory made 125 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including making good disturbed wall surface (brick and plastering work) complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ.
Material and labour for PCC (1:3:6) type C-0, using 12.5 mm graded aggregated as in back filling of chowkhats and for filling in block of hold fast complete all as specified and as directed by Engineer-in-Charge
Supply & fixing factory made plain framed panelled shutters (two or three panels as approved), 35mm thick of 2nd class hard wood (Hollock) with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces or timber flat on both sides (feather edged). The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
Supply & fixing factory made glazed and skeleton shutter, 35mm thick of 2nd class hard wood (Hollock) open rebated (two or three panels as approved) and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire cloth, etc. Sizes of members as specified in SSR Part-I, Section 8 and fitted to chowkhats, menbers shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item of BOQ. (ii) Glazing or wire cloth shall be measured paid separately under appropriate item of BOQ.
Supply & fixing flush shutter 35mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides including adhesive for pasting and screws for fixing to timber frame complete all as specified and as directed by Engineer-in- charge.
Supply & fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
Supply & fixed in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.
Supply & fixing mild steel barrel tower bolt stove enamelled black with bright bolt 200 mm long, fixed complete all as specified & directed by Engineer-in- charge.
Supply & fixing mild steel sliding door bolts 300mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts washers, four on bolt plate and two on staple plate complete all as specified & directed by Engineer-in- charge.
Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge.
Supply & fixing mild steel pressed handle of size 200mm, oval type, stove enameled black complete all as specified & directed by Engineer-in- charge.
Supply and fixing 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw or with welding to metal frame as required complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in replacement 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw or with welding to metal frame as required complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 150mm long (overall length of cover plate ) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, including sitable screws for fixing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing aluminium anodised frame, made out of aluminium section weighing 0.98 Kg/mtr, for doors, windows, ventilators with one or more rebate including jointing cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Note :- If aluminium section used other than above mentioned weighing then weight of each section shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.
Supply & fixing anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass (supply only) shall be measured and paid separately under appropriate item of BOQ.
Supply & fixing anodised aluminium window/ventilator fixed type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc. including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note ;- Glass (supply only) shall be measured and paid separately under appropriate item of BOQ.
Supply & fixing anodised aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass(supply only) shall be measured and paid separately under appropriate item of BOQ.
Supply only coloured tinted glass and glazing with beading of any size of 5.5mm thick, complete as specified and as directed by Engineer-in-Charge.
Supply & fixing aluminium (extruded section body) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge.
Supply & fixing in replacement aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge.
Supply & fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engineer-in-charge.
Supply & fixing 140mm long (overall length of cover plate ) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, including sitable screws for fixing complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in repair Mortice lock, aluminium body, 7 levers, vertical type, size 100 mm complete all as specified & directed by Engineer-in-charge.
Taking down aluminium chowkhats or frame with shutter (without taking off shutter from the frame) not exceed 1.5 Sqm each and removal from site, complete all as specified & directed by Engineer-in-charge.
Taking down aluminium chowkhats or frame with shutter (without taking off shutter from the frame) not exceed 1.5 Sqm but not exceed 4 Sqm, each and removal from site, complete all as specified & directed by Engineer-in-charge.
Taking down aluminium shutter of any description (with or without frame as per site requirement) area exceeding 1 sqm but not exceeding 2 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment /alignment, replacement broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and as directed by Engineer-in- charge.
Taking down aluminium shutter of any description (with or without frame as per site requirement) area not exceeding 1 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment /alignment, replacement broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and as directed by Engineer-in- charge.
Supply and fixing 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge.
Supply and fixing stainless steel butt hinges 100mm, medium weight, cold rolled, complete as specified and as directed by Engineer-in-Charge.
Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised,150mm long complete all as specified & directed by Engineer-in-charge.
Supply and fixing 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge.
Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised,125mm long complete all as specified & directed by Engineer-in-charge.
Supply and fixing stainless steel butt hinges 75mm, medium weight, cold rolled, complete as specified and as directed by Engineer-in-Charge.
Supply & fixing 100mm long aluminum anodised hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate fixed with and including screws complete all as specified and directed by Engineer-in-charge.
Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.
Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, without glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.
Material and labour for mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works including taking out old rusted steel as scrap complete all as specified and as directed by Engineer-in- charge.
Supply & fixing, factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, suitable steel handle, steel peg stay, fixing lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks/plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.
Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including fabrication as directed, including hold fast, locking arrangement, sliding door bolt, stopper etc conforming to Fe-410-W (Gde E-250) quality A including taking out old rusted steel as scrap iron complete all as specified and as directed by Engineer-in- charge
Material and labour for steel rolling shutters push pull or manual type made out of 1.25 MM thick lath, without ball bearing, as specified including top cover, anchoring rod hasp and staple, guide channel, lock, hold fast, complete all as specified in SSR Part-I (2009) para 10.23 including PCC block, erected in position as directed including two coats of synthetic enamel paint over a coat of red oxide primer both sides on exposed surfaces including taking out old defected/rusted shutter and making good the disturbed wall surfaces (brick, plastering and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.
Supply & fixing in repair 18-20mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including cutting and made to shape as required complete all as specified & directed by Engineer-in- charge.
Supply and fixing 18-20mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws/nails/fevicol to timber frame work as in cupboard shutter, shelves etc. including cutting and made to shape as required complete all as specified & directed by Engineer-in- charge.
Supply and fixing drawer pulls 3 screw plate with fixed dished pull 80mm to 100mm long cast iron or mild steel complete all as specified and as directed by Engineer-in-charge .
Supply & fixing Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap when open 30mm complete all as specified and as directed by Engineer-in-charge .
Supply and fixing cupboard knob 40mm dia fixed with nut, screw and washer complete all as specified and as directed by Engineer-in-charge .
Supply and fixing in replacement drapery curtain rod 19/20mm dia, fabricated out of mild steel pipe with PVC coating (ABS), wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engineer-in- charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, oil putty complete all as specified & directed by Engineer-in- charge.
Supply & fixing and cutting as per size requirement 4mm thick sheet glass ordinary quality in squares/retangular exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.
Supply & fixing and cutting as per size requirement 3mm thick sheet glass ordinary quality in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.
Supply & fixing, 3mm thick frosted eatched (one side) in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with fixing material complete all as specified & directed by Engineer-in- charge.
Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.
Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.
Material and labour for rendering/plastering 15mm thick in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement including old rusted plaster taking down, raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed by the Engineer-in-Charge.
Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from the site to a distance not exceeding 100 metre and deposited as directed complete all as directed by Engr-in-Charge
Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm// 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for vitrified ceramic coloured tiles (light shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in- charge.
Material and labour for Preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, preparing the surfaces smooth and after preparing the surfaces applying three coats of lime white wash with using paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old polished wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one or more coats of french polishing to achieve glossing finish upto entire satisfication of Engineer-in-charge including a coat of wood filler complete as specified and as directed by Engineer-in-Charge. Note :-The rates for clear finishes include such preparation, cleaning, stopping and rubbing down after each coat, stopping as specified.
Taking down steel gate shutter of size exceeding 2 Sqm and not exceeding 6 Sqm, material and labour for straightening of certain members, channels, making good edges, repairing of pintle hinges and gate to make it functional smooth including repairing by necessary welding and reviting/replacement of defective parts as required, after repair/replacement of parts as satisfaction of Engineer-in-Charge refixing the shutter in original position including necessary PCC, brick work, plastering, painting, distempering etc. to matching the surface with existing surface, complete as specified and as directed by Engineer-in-Charge.
Material and labour for plastering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement, including taking down old rusted plaster on brick or concrete walls etc., complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for rendering/plastering 5mm thick in cement mortar (1:3) on any face of ceiling, finished fair and even and smooth without using extra cement, including taking down old rusted plaster on brick or concrete surface etc., complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in first floor, ground floor, sunken portion and paving not exceeding 15cm thickness below or above floor level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material and labour for 50 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for sunken treatment to sunken floor, cleaning the surface by wire brush, rendering to floor and sides with 10mm thick in cement mortar (1:3) including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement, after that material & labour providing two coat of two components (one part liquid two part powder) ready to use cementitious water proofing coating on properly prepared surface by brushing having elongation of > 50% for the applying water proofing treatment on horizontal and vertical surfaces of sunken floor, complete all as specified and as directed by Engineer-in-charge. NOTE:- (i) Applying 1st coat of two components modified polymer coating. (ii) Provn of glass fiber mess of 2mm x 2mm immediately on alone coating. (iii) Apply 2nd coat of two components modified polymer coating after 72 Hrs on horizontal and vertical surfaces.
Material and labour for 30mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floor, sunken floor etc, finished rough to receive tiles, including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only)
Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge. Make : Dr Fixit/Fosroc/BASF/STP
Material & Labour for PCC (1:5:10) type E2 using 40mm graded stone aggregate as mass filling, filling as in sunken floors complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe anti syphonage etc., including plastic water closet seat with cover (white or black colour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.
Supply & fixed in repair Plastic water closet seat with cover (black/white colour) closed pattern with flat bottom/recessed bottom and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repair plain fillets made from second class soft wood square, rectangular or trangular in section, clean sawn, sectional area exc 3 sqcm and n exc 6 sqcm fixed to timber frame with nails complete all as specified & directed by Engineer-in- charge.
Supply & fixing in replacement vitreous china wash basin, white, flat back of size 550mm x 400mm, including 32mm chromium plated waste coupling and PVC waste pipe including bracket and cutting for and pinning in end of bracket or erecting, complete all as specified and as directed by Engineer-in-Charge. (Note :- Pillar tap if required in replacement, shall be measured & paid separately as under appropriate item of BOQ.)
Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement stainless steel sink made out of 1.00mm thick sheet, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, kitchen or laboratory with plugs, washers, waste pipe including bedding in cement mortar, fixing in existing space or fixing with cast iron cantilever brackets and connecting union to waste pipe, including taking down old unserviceable sink complete all as specified and directed by Engineer-in-Charge.
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection including dismantling/taking down of existing unserviceable PVC water storage tanks of any description complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately as under appropriate item of BOQ.)
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection including dismantling/taking down of existing unserviceable PVC water storage tanks of any description complete all as specified and as directed by Engineer-in-charge. (Note :- Float valve and gate valve shall be measured & paid separately as under appropriate item of BOQ.)
Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other means, and preparing the surfaces smooth by applying chalk whitening to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, and after preparing the surfaces applying two coats of oil emulsion distemper (washable), as approved tint/colour by using paint roller brush complete all as specified and as directed by Engineer-in-Charge.
Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. complete all as specified and as directed by Engineer-in-charge.
Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.
Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge.
Re-fixing old serviceable 15mm bore galvanised steel water tubing (GI pipe) including all fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling and laid in floor/concealed in walls etc and making good disturbed surfaces of walls complete all as specified and as directed by Engineer-in-charge. (Note :- Old serviceable pipe and fittings obtained from taking up or down (here-in-before) item of this BOQ shall be reused after necessary cleaning internally.
Re-fixing old serviceable 20mm bore galvanised steel water tubing (GI pipe) including all fittings like elbow, tee, union, socket, reducer etc. in new or old portion/position to walls, ceiling and laid in floor/concealed in walls etc and making good disturbed surfaces of walls complete all as specified and as directed by Engineer-in-charge. (Note :- Old serviceable pipe and fittings obtained from taking up or down (here-in-before) item of this BOQ shall be reused after necessary cleaning internally.
Supply & fixing 450 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
Supply and fixing in replacement bib tap cast copper alloy, chromium plated with crutch or butterfly handle with capstan head, wall flange, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply and fixing in replacement stop valve/angle valve cast copper alloy, with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock shall be as given in SSR or in relevant IS.
Supply & fixing in replacement cromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacement brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge. Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS.
Supply & fixing 32mm dia brass chromium plated bottle traps for wash basins or sinks with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed by Engineer-in- charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply & fixing in repair 32mm bore waste fittings/coupling, for sink, basin, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed by Engineer-in- charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply & fixing in repair 40mm bore waste fittings/coupling, for sink, basin, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed by Engineer-in- charge. Note :- The minimum weight shall be as given in SSR or in relevant IS.
Supply & fixing in repair 32/40mm spring type PVC waste pipe fixed to WHB & Sink etc., complete all as specified and as directed by Engineer-in- charge. Note :- The minimum length of each pipe should more then 0.70 metre.
Supply & fixing in repair PVC grating 140mm round with waste hole, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair water tank cover for capacity to tank upto 500 - 1000 litres, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 15mm chromium plated wall mixer with crutch or butterfly handle lettered for hot and cold screwed down for high pressure complete with necessary fittings, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 15mm chromium plated basin mixer with crutch or butterfly handle lettered for hot and cold screwed down for high pressure complete with necessary fittings, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair hand shower (health faucet) ABS body including 1 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge. Make :- Cat Part ALD-CHR-593N of Jaquar or equivalent (Equivalency approved by GE) in make mentioned in Appx A to PSS-II
Supply & fixing in repair chromium plated jet for pedestal pattern WC screwed down high pressure complete with necessary fittings, complete all as specified and as directed by Engineer-in-charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and as directed by Engineer-in-charge.
Supply & fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including stack clamp, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including stack clamp, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing PVC (SWR) bends (any radius) suitable for 75mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 20mm bore ball valves high pressure with polythene float and fly-nuts complete screwed for iron pipe or brass ferrlue and fixed, complete all as specified and as directed by Engineer-in- charge.
Material and labour for washed stone great plaster on exterior wall in two layer under 12mm thick plaster in CM 1:4, furrowing the under layer with scratching toll applying cement slurry on the under layer @ 3 Kg per Sqm. Top layer 15mm thick with coloured stone chipping of 10mm nominal size mixed with cement ratio 1:2 in panels of size 1.2m x 1.2m with groove all around as per approved patterns including scrubbing & washing the top layer with brushes & water to expose the stone chipping, complete all as specified and as directed by Engineer-in- charge.
Supply and fixed in repair 6mm thick asbestos cement plain building board fixed to timber boards fixed to timber frame work, complete all as specified and as directed by Engineer-in- charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
RAKESH KUMAR GARG & CO.
R K GOYAL & COMPANY
SHARDA ENTERPRIES
M/S BHAGWATI CONSTRUCTION COMPANY
M/s DHEERAJ JAIN CONSTRUCTION COMPANY
G N CONSTRUCTIONS
K L JINDAL AND CO.
M/s Balvinder Singh Engineer and Contractors
M K Enterprises
M/s MITTAL CONSTRUCTIONS
M/s GURFATEH BUILDERS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .