Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC 31 TILAK NAGAR SRI GANGANAGAR 335001 RAJ | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.0 L+₹1.7 L (5.03%)Rejected-Finance | L2 | Rejected-Finance L2 FOR REJECTED | |
| 3 | L3₹36.4 L+₹3.1 L (9.24%)Rejected-Finance | L3 | Rejected-Finance L3 FOR REJECTED | |
| 4 | L4₹36.8 L+₹3.6 L (10.7%)Rejected-Finance H NO 40 CHOTTI BARADARI PART I GARHA ROAD NEAR MEDICAL COLLEGE JALANDHAR 144 022 PUNJAB | JALANDHAR | JALANDHAR | PUNJAB | 144022 | L4 | Rejected-Finance L4 FOR REJECTED | |
| 5 | L5₹37.2 L+₹3.9 L (11.8%)Rejected-Finance GROUND BALURGHAT COMPOUND NEAR TRIPURA ROAD KHANAPARA ROAD GUWAHATI KAMRUP METROPOLITAN ASSAM 781029 | KAMRUP METRO | ASSAM | 781029 | L5 | Rejected-Finance L5 FOR REJECTED |
Tender Value
Refer Docs
EMD Value
₹86,720
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE SRI GANGANAGAR
HQ CWE POST BOX 48 SRI GANGANAGAR-335001 (Rajasthan)
CA NO CWE/SGNR/TOKEN-45 OF 2022-23 PROVISION OF RING MAIN CIRCUIT FOR FEEDER NO-01 AND 02 AT MILITARY STATION ABOHAR
2022_MES_566087_1
CA NO CWE SGNR T-45 OF 2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
GE ABOHAR
AS PER NIT
9 documents required · 9 mandatory
₹500
GE ABOHAR
₹86,720
Yes
21 Feb 2023
30 Nov 2022
29 Dec 2022
30 Nov 2022
27 Dec 2022
13 Dec 2022
Amount
Excavation in trenches any type of soil, n exc 1.5m wide and n exc 1.5m in depth, for foundation for laying of cable and getting out complete all as specdied and directed by Engineer-in- Charge.
Returning , filling in including, spreading, levelling, watering and well reamming in layers not exc. 25 cm complete all as specificed and directed by Engineer-in- Charge.
Removing excavated material n exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specificed and directedby Engineer-in- Charge.
M & L for sand cushioning with dry and clean locally available sand for underground cable 8cm before laying cable and 15 cm after laying cable and punned to 18 cm after laying of cable complete all as specified and directed by Engineer-in-Charge (Note: Pressed thickness shall be considered for payment purpose)
S & F GI tube light grade of size 100 mm with all fitting fixed to wall and celling or laid in floors/under road etc complete all as specdied and directed by Engineer-in- Charge.
S & F GI tube light grade galvanised of size 80 mm with all fitting fixed to wall and celling or laid in floors/under road etc complete all as specdied and directed by Engineer-in- Charge.
Supplying and laying un-reinforced precast concrete cable cover class HVP type 1 with peak, size 300mmx180mmx40mm laid flat length of cover across the length of cable complete all as specified and directed by Engr-In-Charge.
Boring of holes under road, pavement, hard standing by trenchless technology usingn ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specdied and directed by Engineer-in- Charge.
Supply laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured,, electric power cables (heavy duty) with standard aluminium conductor, 11000 Volts grade of size 95 sqmm, 3 core complete all as specdied and directed by Engineer-in- Charge.
Supply and fixing cable route indicator for HT UG Cable of 11000 Volts bolted with 40 x 6 mm flat cast iron member of height 1 mtr having top portion round shape of 150 mm dia Cast Iron duly written HT cable and arrow marks for cable directions, embedded in PCC (1:3:6) type C2 of size 20 x 20 x 30 cm block complete all as specdied and directed by Engineer-in- Charge.
Supply, Insrallation, testing and comissioning of 3 Way 11 KV Out door (IP-54) type extensible Ring main Unit (RMU) fully motorized consist of 02 Nos VCB (Vaccume circuit breakers) for incoming and one number for outgoing with self-powered relay for pretection of transformer, floor mounted, fully motorized with internal copper bus bar and all parts such as bus bars, LBSs connections of RMU should be enclosed in stainless steel tank. RMU shall be solid earthing system and complete with all accessories such as terminal boots,VPIS,FPI cable supports, mechanical indications for Load break switch ON/OFF, spring charge, mnometer as per with IEC standards 62271-200. Internal arc type tested for 21 KA for 1 sec. And also RMU test reports shall be type tested with min 3 functionaL units and the type test reports on single functional unit shall not be acceptable and including necessary interlocking paver block M-30 and 60 mm thick alongwith PCC and sand as site requirement for safety and operation etc complete all as specdied and directed by Engineer-in- Charge as followings:-
Technical specifications: Rated voltage should be-12 KV Rated power frequency -28 KV Rated lightning impulse withstand voltage-75 KV Rated current for LVV feeder-630 Amps Rated short time current withstand-25KA for 1 Sec Rated short time making current-50KA Ambient temperature-(5 degree C to + 40 degree C) Rated intenral arc rating-21 KA for 1 sec for tank and cable box both category IAC-AFLR. RMU shall be fully motorized and manual operation both. RMU shall be provided with battery and battery charger rated for 24 V DC for motorization suitable for 10 Nos on/Off operations. RMU shall be exntensible by means of plug in type arrangement in future. RMU manufacturer shall use own make of vaccum interrupter, relay etc., RMU tanks shall be 2x/0.5 mm thick of stainless stel material welded by using robotic welding or manual tighwelding. Sealed for light high having IP-67 degree protection with S&F gas as insulation with leakage rate less than 0.1% per year tested as per IEC 62271-200. RMU enclosure shall be made up of CRCA having minimum thickness of 3.15 mm RMU cable box shall be only front accessible type to have easy access to protection and metering CTs. RMU shall be painted with suitable painting having thickness 60-80 micron. RMU shall have metering bus connected metering compartment shall be prefereably on the left side. RMU metering compartment shall be provided with potential transformer rated for 11 KV/3/110KV/3, 250 MVA for metering purpose having class-0.5 accuracy.
Contd.,,Technical specifications: RMU shall be provided with metering CTs rated for 200-100/1 amps class-0.5 accuracy, 2.5 VA burden for circuit breakers. RMU shall be provided with metering CTs rated for 200-100/1 amps class 10P10 accuracy, 2.5 VA burden for circuit breakers All feeders for RMU shall be provided with multifunction meters having complete range of measurement including max demand and shall have serial port for communication on MODBUS protocol. The RMU manufacturer shall user meters of own make. All circuit breakers feeder shall be self powered ans shall be provided with cover current & earth fault protection for transformer and shall have serial port for communication on MODBUS protocol. RMU shall be provided with fault passage indicator on every isolator having LCD display and auto reset facility and one NO/NC auxilary contact for showing status for SCADA. Nominal operating gas pressure 1.2 bars RMU shall have live cable LED indication through capacitor voltage divide mounted on the bushings. NOTE: The quoted rates include PCC footings with brick masonry in CM (1:4), 1.2 M wide on all around (four side) including making arrangement for cable entry on rear side of RMU duly plastered including approach stairs. RMU shall be installed at a height of 75 cm above ground level.
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to galvanised iron earth strip 25x4mm thick fixed by means of bolts, nuts and washers of the earth wire galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 32mm dia upto eathing test point and watering pipe 20mm dia GI medium grade with socket and plug 30 cm above ground level including earthwork, PCC chamber in PCC (1:3:6) type C-2 using 40mm stone aggregate, cast iron cover, wire meah etc all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 complete and all as specified and direcrted by Engr-in-charge. Notes:- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 30 cms above ground level. (ii) GI strip connecting upto pump,Gen set,LT panel and DBs earth connection is included in this item. (iii) GI pipe 32 mm dia protection pipe shall be provided upto earthing test point.
All as per item No 12 above here in before but connecting earth lead shall be use as GI wire of 4 mm dia as earth conductor connecting complete and all as specified and direcrted by Engr-in-charge.
S&F HT 11 KV Air break switch, gang operated and drop out fuse unit of 12 insulators complete with all accessories, mounted on insulator and steel frame, with operating mechanism working from ground level, for current rating up to 200 Amps including GI pipe of suitable size,clamps,nuts,bolts amd washers etc complete and all as specified and direcrted by Engr-in-charge
S&F HT 11 KV Air break switch, gang operated and drop out fuse unit of 12 insulators complete with all accessories, mounted on insulator and steel frame, with operating mechanism working from ground level, for current rating up to 400 Amps including GI pipe of suitable size,clamps,nuts,bolts amd washers etc complete and all as specified and direcrted by Engr-in-charge.
M&L for cutting upto 30 cm width and depth and trimming surfaces as required of the road/hard standing and making good disturbed surfaces by using PCC type C2 (1:3:6) using 40mm graded stone aggregate for the fixing the pipe complete all as directed by the Engr-in-Charge.
M&L for filling of aggrigate for loose filling of size 40 mm to 80 mm graded brocken stone aggregate complete all as specified and directed by Engineer-in-charge.
Supply and errect steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws all as specified type 410 SP - 55(11.0M Long) as per IS-2713 (Part-III)of 1980 and applying three coats of aluminium paint over a coat of zinc chrome primer to the exposed surfaces complete and all as specified and direcrted by Engr-in-charge. Note:- 1. Excavation and concrete shall be measured and paid separately. 2. Steel tubular pole using for errecting 2/4 pole structure labour cost deemed to include. 3. MS bracing,channels,cross arms and MS accessories shall be measured and paid separtely under relevent items of schedule.
M&L for fabrication of cross arms bracings supports,clamps and back plates,iron stainer, water gate, ladder for clear water tank etc as required structural steel section including nuts, bolts, washers, welding,bending, cold or hot, drilling holes for bolts in any shape or size and including of one coat of primer and one under coat and one finishing coat of paint complete all as specified and as directed by Engr in charge.
M&L for cement concrete in foundations, filling and mass coocrete type D2 (1:4:8) using with 40 mm graded stone aggrigate for foundation of pole etc complete and all as specified and direcrted by Engr-in-charge
M&L for providing PCC (1:3:6) type C2 using 40mm graded stone aggregate as foundations, filling and mass concrete complete and all as specified and direcrted by Engr-in-charge
M&L for providing cement concrete type B1, (1:2:4) using 20 mm stone aggrigate as in coping, chamfered on edges complete and all as specified and direcrted by Engr-in-charge.
S&F Pin type,porcelain,vitreous,white,brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 150 mm height,150 mm dia for 11000 volts grade complete and all as specified and direcrted by Engr-in-charge
S&F disc type insulator, porcelain,vitreous 145 mm high and 255 mm dia ball and socket type,white,brown or green 'Two in series' assembly for tension with tension clamps for conductors,suitable for working pressure 11000 volts grade complete all as specified and directed by Engineer-in-charge.
S&F loop type insulator, vitrous porcelain, white brown or green large size with overall dimensions 90x140 mm clearance of hole 25.5 mm dia complete all as specified and directed by Engineer-in-charge.
Supply and fix stay assembly complete with accessories as shown electrical plate No. 1 of SSR Part-I for HT poles with 20 mm dia stay rod complete and all as specified and direcrted by Engr-in-charge.
Supply and fixing Galvanised steel wire 3.15 or 4mm dia for earth wire complete and all as specified and direcrted by Engr-in-charge.
Supply and fixing cable jointing kit for 11 KV grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 sqmm to 95 sqmm complete and all as specified and direcrted by Engr-in-charge
Supply and fix cable jointing kit for 11 KV grade cable for out door termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete and all as specified and direcrted by Engr-in-charge
S&F lightning arresterss expulsion type complete with all fittings, transmission class, discharge capacity 65 Kilo amp suitable for 11000 Volts complete and all as specified and direcrted by Engr-in-charge
Kaul Enterprises
HARSH CONSTRUCTION CO.
UNITED ENGINEERING CORPORATION
M/S SHREE SHYAM TRADERS
N.R.Builders
Rasvinderpalandco
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .