REPAIR/MAINT OF MANHOLES, DRAIN, BOUNDARY WALL, STEEL GATE, GARBAGE BINS, FENCING, CLEANING OF SEWAGE LINE AND CERTAIN MISC B/R WORKS OF ZONE B AT OLD CANTT ALLAHABAD

Amount

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in soft/loose soil and getting out for foundation, trenches etc complete all as specified & directed.

Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removing surplus excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Demolition of Cement Concrete (reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in drain cover, cover slab (for manholes), chajjas, water troughs, mangers, shelves and similar work including necessary form work and set in CM 1:4 complete all as specified & directed. Note: (a) The quoted rate is deemed to include the use of forms, moulds or machine moulds and setting the blocks, slabs, etc. complete including raking back the joints of the internal faces (at least 10 mm) for pointing as the work proceeds or finishing with neat flush joints. (b) Reinforcement shall be measured and paid separately.

Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed.

Mild steel bars 6 mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facing, dresssed stonework and precast concrete articles complete all as specified and directed.

Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed. [Except Bricks]

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick (External surfaces) in CM 1:4 on fair faces of brick work or concrete surfaces mixed with Water proofing compound as in wall, drain, etc, finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note:- The qouted rate shall be deemed to inclusive of the water proofing compound.

Rendering 15mm thick (Internal surfaces) in CM 1:6 on other than fair faces of brick work or concrete surfaces as in wall, drain, etc, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour, complete all as specifed and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of cement base paint on walls surface, complete all as specified and directed.

Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces, including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of exterior acrylic weather proof paint on walls surface, complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in filling up sunken floor or mass concrete or similar wrok complete all as specified & directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), including provision of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe, CI trap 100mm bore of pipe, fixed in repair, complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern), including fixing bolts, flushing cistern and flush pipe, seat cover connection to drain or outgoing pipe and to flushing pipe & anti syphonage pipe etc with aluminium hinging device, fixed in repair, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.

Joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm each (Min size 400mm x 400mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 300mm x 200mm x 5 to 6 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.

Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 450 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:3, complete all as specified and directed.

MS work for fencing, post and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330 complete all as specified and directed.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), fixed in repairs, complete all as specified and directed.

Restraining Resecuring including making good wire staples of galvanised barbed wire etc, complete all as specified and directed.

Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Preparation of old steel and iron surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Preparation of new steel and iron surfaces n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

PCC type C-1, 1:3:6 using 20mm graded stone aggregate in surface channel and drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. Note: Forming channels shall be measured and paid separately.

Cleaning/ Removal of debris / soil form open drain to a distance n exc 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

Precast Cement Concrete jallies, 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate ), 35 mm thick, set in CM 1:4 complete all as specified and directed.

PCC 1:4:8 , type D-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

PCC 1:4:8 , type D-2, (using 40mm graded crushed stone aggregate), 75 mm thick, as in sub base, complete all as specified and directed.

Chequered cement concrete coloured tiles having hard rubber finish top with polymer admixtures in any pattern or design of minimum size 30cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:4, complete all as specified & directed.

Machine pressed precast concrete interlocking paver block having hard rubber finish top with polymer admixtures in any pattern or design any shape and size confirming to IS:15658 - 2006, 60 mm thick, M-35 grade with grey cement and pigment over 50 mm thick sand cushioning, including necessary excavation and removal of soil etc, complete all as specified and directed.

Granite stone, 18 to 20 mm thick, machine cut in vertical surfaces such as on gate pillars in single piece laid over 10mm thick cement screed in cement mortar 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including grinding and polishing, complete all as specified and directed.

Cleaning of choked sewer line of 100mm dia upto any depth manually or through mechanical appliances and making sewer line functional, complete including working under foul conditions and depositing the sludge rubbish etc. off the premises at an isolated place not exceeding 5 km distance, complete all as specified and directed. Note: Manholes connected with affected sewer line shall be measured separately.

Cleaning of choked sewer line of 150mm dia upto any depth manually or through mechanical appliances and making sewer line functional, complete including working under foul conditions and depositing the sludge rubbish etc. off the premises at an isolated place not exceeding 5 km distance, complete all as specified and directed. Note: Manholes connected with affected sewer line shall be measured separately.

Cleaning of choked sewer line of 200mm dia, upto any depth through diesel running vehilce mounting hydraulic operated high pressure suction-cum-jetting sewer cleaning machine fitted with pump having suction capacity and water jetting tank including skilled operator, supervisor/ enginer and two safaiwalas etc, including working under foul conditions and depositing the sludge rubbish etc. off the premises at an isolated place not exceeding 5 km distance, complete all as specified and directed.

Cleaning of choked sewer line of 300mm dia, upto any depth through diesel running vehilce mounting hydraulic operated high pressure suction-cum-jetting sewer cleaning machine fitted with pump having suction capacity and water jetting tank including skilled operator, supervisor/ enginer and two safaiwalas etc, including working under foul conditions and depositing the sludge rubbish etc. off the premises at an isolated place not exceeding 5 km distance, complete all as specified and directed.

Cleaning of blocked / chocked manholes including removal of sludge / dirt etc water semi solid materials including other materials from manholes of any depth including working under foul condition and removing rubbish & deposited outside building premises complete all as specified and directed. Note: Sludge will be disposed off the area out of premises of MOD and covered the same by bleaching powder @1.5 kg/sqm over surface of sludge.

Cleaning of chocked Water closet/ Floor trap/ Gully trap etc manually by taking off sludge waste, night soil and silted soil from the existing pipe, by taking out accumulated garbage, silt, mud etc and removing the same at a distance not exceeding 50 m (where directed), washing and well flushing of the floor trap/WC/gully trap with water, complete all as specfied and directed.

Demolition and breaking up salt glazed stoneware drain pipe of any internal dia, set in cement mortar, complete all as specfied and directed. Note: Excavation, earth work, salt glazed stoneware drain pipe, concrete bed to drain pipes shall be measured and paid separately under respective items in this schedule.

Salt glazed stoneware drain pipe 200mm bore, grade A laid in trenches and jointed in CM 1:1, complete all as specfied and directed.

Salt glazed stoneware drain pipe 150 mm bore, grade A laid in trenches and jointed in CM 1:1, complete all as specfied and directed.

Cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm crushed stone aggregate for the 200 mm internal dia of pipe complete all as specified & directed.

Cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm crushed stone aggregate for the 150 mm internal dia of pipe complete all as specified & directed.

PVC (SWR) pipes of 110mm internal dia, single socketed in any length with rubber ring joints fixed to walls or laid in floors, with MS clips or clamps, fixed in repair, complete all as specified & directed.

PVC (SWR) pipes of 75mm internal dia, single socketed in any length with rubber ring joints fixed to walls or laid in floors, with MS clips or clamps, fixed in repair, complete all as specified & directed.

PVC(SWR) bends in any radius, 110mm bore, fixed in repair, complete all as specified and directed.

PVC(SWR) bends in any radius, 110mm bore, provided with access door, fixed in repair, complete all as specified and directed.

PVC(SWR) bends in any radius, 75mm bore, fixed in repair, complete all as specified and directed.

PVC(SWR) bends in any radius, 75mm bore, provided with access door, fixed in repair, complete all as specified and directed.

Cast Iron 100 mm bore floor trap, plain with grating including jointing with solvent cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate), with run lead, fixed in repair, complete all as specified and directed.

Cast iron pipe (sand cast) soil waste and vent pipes, 100mm bore, in any length with or without ears, joint with cement joints, fixed in walls, complete all as specified & directed.

Cast Iron branch piece single (equal and unequal) for 100 mm bore pipe, complete all as specified & directed.

Cast Iron plain bend 100mm bore, fixed in reapir, complete all as specified & directed.

M/S Akhilesh Enterprises

M/S SS Tarders

vs construction

Shivagya Engineering

AMARDEEP ENTERPRISES

Ram Babu Bros

Shivam Constructions

SUNNY ELECTRONICS CORPORTAION

Crown Engineering Corporation