REPAIR RECANNING AND PAINTING TO STEEL FURNITURE GE DANAPUR CANTT

Amount

M&L for preparation of old painted iron & steel surfaces (externally and internally including shelves etc) by scraping & rubbing down with sand paper, removing dents and scratches, if any and filing the same with paste filler and applying a one coat primer and two coat of olive green/silver synthetic enamel paint to the following furniture items complete all as per drg and directed.

Almirah steel. large

Almirah Steel Medium

Chair steel tubular with/without arms.

Rack Steel Adj enclosed type 6 tier

Table office officers steel.

Table clerk steel.

Locker steel.

Book Case glazed Steel

Rack adj steel open 6 shelves

Book self open small Steel.

Book self open Large steel.

MNF Set Iron

Chair school with hand board

Table 3x2 steel with drawer/without drawer

Shoe Rack Steel

ALMIRAH STEEL LARGE FD-67 (M)/351/1031

Taking out unserviceable broken leg from almirah steel large and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including applying two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to Almirah large steel complete all as shown on drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing.

Supply and fixing steel almirah locking arrangement and locking bar of 8mm dia with cover for locking system made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including appllying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out old unserviciable/damaged shelf of almirah large steel and supply & fixed of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including appllying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of Almirah large steel and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and appllying two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

ALMIRAH STEEL MEDIUM FD-67(M)/243/350/1032

Taking out unserviceable broken leg from almirah steel medium and supply & fixing new leg made out of plain back iron sheet1mm thick of suitable size and welded including appllying two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

Taking out old unserviceable lock without damaging the adjacent parts of almirah and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to almirah steel medium complete all as shown on drawing.

Taking out old unserviceable handles without damaging the adjacent parts of almirah and supply & fixing new steel chromium plated handles 150 mm long of approved quality complete all as shown on drawing.

Supply and fixing steel almirah locking arrangement and locking bar of 8mm dia with cover for locking system made out of 1mm thick MS sheet to required size and shape as per drg suitable for three way locking device and fixed with suitable size of MS screws including appllying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out old unserviciable/damaged shelf of almirah steel medium and supply & fixing of new shelf made out of MS sheet 1mm thick band to required shape & size and welding the same properly in position including appllying two coats of spray paints with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of almirah steel medium and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and appllying two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer complete all as shown on drawing.

CHAIR VERANDAH STEEL (FD-19/256)

Removing of unserviciable/torn nylon newar/ plastic cane/PVC Shoes from existing chair and supply & recanning with new plastic cane 4mm wide 1/2 round of approved quality all as directed irrespective of what is shown on drawing including painting the frame with one coat of white synthetic enamel paint before recanning including S & F PVC shoes to the legs comlete all as directed and rest all as per drawing.

CHAIR TUBULAR STEEL WITH/WITHOUT ARM (FD-75M)

Removing of existing old unserviceable seat and supply & fixing new seat made out of teak wood frame duly canned, Godrej patten and applying two coats of high glossy French Polish fixed with new screws complete and rest all as per drawing.

All as per item No. 5.01 above but old unserviceable back complete.

Removing of existing broken unserviceable arm and supply & fixing new arm of 2nd class hard wood of suitable size and applying two coats of high glossy French Police fixed with new screws complete all as shown on drawing.

S&F MS cleats of size 25 mmx 50mmx3mm thick, welded to frame of seat of chair duly painted with one coat of OG synthetic enamel paint over a coat of red oxide primer complete all as shown on drawing.

TABLE (3'X2') WITH DRAWER & WITHOUT DRAWER (FD-1007/1008)

Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish complete and rest all as per drawing.

Removing of old broken drawer from existing table 3’x2’ and providing new steel drawer made of 1mm thick PBI sheet duly painted with two coats of OG synthetic enamel paint over a coat of red oxide primer as directed and shown on drawing..

Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock, with duplicate keys complete.

TABLE OFFICE CLERK STEEL (FD-84 (M)/1004

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg.

Removing of old broken drawer from existing table office clerk steel and providing new steel drawer made out of 1mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer as directed by Engr-in-Charge and rest all as per drawing.

Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock with duplicate keys complete and rest all as per drawing.

TABLE OFFICE OFFICER STEEL (FD-1003)

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg.

Removing of old broken drawer from existing table office officer steel and providing new steel drawer made out of 1mm thick PBI sheet duly painted one coat with synthetic enemal paint over one coat primer as directed by Engr-in-Charge and rest all as per drawing.

Removing the existing unserviceable lock from the drawer of table and supply & fixing new brass lock with duplicate keys complete and rest all as per drawing.

TEAPOY VERANDAH (FD-255)

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade-I , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete and rest all as per drawing.

Preparation of old steel surface of teapoy verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of white synthetic enameled paint as directed by Engineer-in-Charge.

TABLE COMPUTER

Removing of old/broken table top and supply & fixing new top of suitable size, made of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm size fixed with adhesive and panel pins and duly given a coat of high gloss french polish complete as per drg.

Removing of old broken drawer from existing table computer and providing new 18mm thick pre laminated particle board drawer should 75mm deep on telescopic channel as directed by Engr-in-Charge and rest all as per drawing.

Removing of old broken key board from existing table computer and providing new 18mm thick pre laminated particle board key board tray on telescopic channel as directed by Engr-in-Charge and rest all as per drawing.18mm thick prelaminated particle board .

Preparation of old steel surface of table computer and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enameled paint as directed by Engineer-in-Charge.

LOCKER STEEL(FD-257/1029)

Taking out unserviceable broken leg from Locker steel and supply & fixing new leg made out of plain black iron sheet 1mm thick of suitable size including applying a coat of red oxide primer and one coat of synthetic enamel paint after preparation of surface complete and rest all as per drawing.

Dismantling/Taking down old unserviceable hasp and staple without damaging the adjacent parts of locker and supply & fixing new mild steel chromium plated hasp and staple 100mm size complete all as specified and rest all as per drawing.

Taking out old unserviceable handles without damaging the adjacent parts of Locker and supply & fixing new mild steel chromium plated handles 100 mm long of approved quality complete all as shown on drawing.

Taking out old unserviceable broken hinges from locker without damaging the adjacent parts of locker and supply & fixing new MS hinges of 75 mm long of approved quality complete and rest all as per drawing.

Dismantling carefully and taking out unserviciable/damaged door single leaf of locker steel and supply and fixining new door single leaf made out of MS sheet 1mm thick to the required shape and size and applining two coats of spray paints internally and externally with synthetic enamel paint over a coat of redoxide primer and complete all as shown on drawing.

TABLE STEEL 1520x860x760/1670x760x750 mm (FD-1010)

Removing of old/broken table top and supply & fixing new table top of suitable size, made out of 18 mm thick pre-laminated particle board bonded with phenol formaledyde synthtic resin, exterior grade , one side with approved shade and balancing with lamination on other side with and including all around teak wood beading of 4mm x 18 mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and Preparation of old steel surface of table and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enameled paint over a coat of red oxide primer and complete as directed by Engineer-in-Charge.

CHAIR EXECUTIVE REVOLVING LOW BACK

Taking out old unserviceable broken seat & back from chair revolving without damaging the adjacent parts of chair Revolving and supply & fixing new seat & back as directed by Engr-in-Charge.

Taking out old unserviceable broken pedestal from chair Revolving without damaging the adjacent parts of chair Revolving and supply & fixing new pedestal shall be approved quality complete all as shown on drawing. .

Taking out old unserviceable broken handal from chair Revolving without damaging the adjacent parts of chair Revolving and supply & fixing with alen bolt to new handal shall be approved quality complete & as directed by Engr-in-Charge.

Taking out old unserviceable broken Twin wheel castors from chair Revolving without damaging the adjacent parts of chair Revolving and supply & fixing new Twin wheel castors are also fitted in the pedestal accessories. Complete as directed by Engr-in-Charge.

Taking out old unserviceable broken Hoidraulic up and down from chair Revolving without damaging the adjacent parts of chair Revolving and supply & fixing new Hoidraulic up and down approved quality and complete as shown an drawing.

Chair Computer MAP

Taking out old unserviceable broken seat & back from chair computer without damaging the adjacent parts of chair computer and supply & fixing new seat & back shall be approved quality complete all as shown on drawing.

Taking out old unserviceable broken pedestal from chair computer without damaging the adjacent parts of chair computer and supply & fixing new pedestal shall be approved quality complete all as shown on drawing. .

Taking out old unserviceable broken handle from chair computer without damaging the adjacent parts of chair computer and supply & fixing with alen bolt to new handal shall be approved quality complete all as shown on drawing..

Taking out old unserviceable broken Twin wheel castors from chair computer without damaging the adjacent parts of chair computer and supply & fixing new Twin wheel castors are also fitted in the pedestal accessories. shall be approved quality complete all as shown on drawing..

Taking out old unserviceable broken Hoidraulic up and down from chair computer without damaging the adjacent parts of chair computer and supply & fixing new Hoidraulic up and down shall be approved quality complete all as shown on drawing.

Chair CBA special with hand rest

Taking out old unserviceable Seat & back of Chair CBA special with hand rest and supply & fixed of new Seat & back shall be made of 12mm thick hot pressed plywood unholstered with fabric and moulded polyurethane foam with PVC lipping alround. Back foam shall be design with contoured lumber support for extra comfort as specified and shown on drawing.

Taking out old unserviceable Arm rest of Chair CBA special with hand rest and supply & fixed of new arm rest made of polyurethane complete all as specified and directed by Engineer-in-Charge.

All mild steel surface exposed to view shall be spray painted finished with two coats of synthetic enameled paint over a coat of ared oxide primer.

Charpoy GI Ply top- FD-220

Taking out old unserviceable broken ply of charpoy folding supply & fixing with 12mm thick commercial ISI Marked ply wood with 08 Nos of nut and bolt with washer over GI Charpoy all as specified and directed by Engineer-in-Charge.

Book case glazed steel Fd-1028

Taking out old unserviceable broken shutter of book case glazed and supply & fixing new shutter of 1mm thick MS sheet with glass panel of 3 mm thick including applying two coats of spray paints with olive green synthetic enamel paint over a coat of redoxide primer complete all as specified and directed by Engineer-in-Charge.

Taking out old unserviceable lock without damaging the adjacent parts of Book Case Glazed and supply & fixing new MS lock Godrej/link (Including duplicate keys of stainless steel of size 65mm to Book Case Glazed complete all as shown on drawing.

M/S SAROJ KUMAR SINGH (BID ID -3103603)

M/s Naresh Chand Agrawal (BID ID -3099551)