REPAIRS AND MAINT OF INTERNAL ELECTRIFICATION INCLUDING FANS AND GEYSERS AT CADETS LIVING ACCN AND ADMINISTRATIVE BUILDING FOR POP MAY 2021 AND EOT ST 2021 AT NDA KHADAKWASLA

Amount

Taking down carefully copper/ aluminium point wiring (light/fan/ socket) including all accessories wire, casing caping/ conduit, screws etc and making good the disturbed surfaces complete all as directed

M&L for point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- One light/Fan point controlled by one way switch 6 Amps 240 volts

Ditto all as per item No. 2 above but One 3 pin 6 Amps socket out let point on independent board.

Ditto all as per item No. 2 above but One 3 pin 6 Amps socket out let point on same board.

M&L for point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, PVC casing capping double lock type ISI marked not less than 25mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , suitable for normal switches, sockets, fan regulator etc for following :- One light/Fan point controlled by one way switch 6 Amps 240 volts

Ditto all as per item No. 5 above but One 3 pin 6 Amps socket out let point on independent board.

Ditto all as per item No. 5 above but One 3 pin 6 Amps socket out let point on same board.

M&L for point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box ,suitable for normal 15 Amps socket and switch outlet power point independent circuit

M&L for point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit

M&L for concealed point wiring drawn through existing conduit of any type with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed 650/1100 V grade conforming to IS 694-1990 adhering to colour code including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sqmm copper conductor as earth wire multistranded green colour with terminal/sunken boxes as required at site incl making good the disturbed surfaces and matching with existing surface complete all as specified.

M&L for concealed point wiring drawn through existing conduit of any type with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed 650/1100 V grade conforming to IS 694-1990 adhering to colour code including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sqmm copper conductor as earth wire multistranded green colour with terminal/sunken boxes as required at site incl making good the disturbed surfaces and matching with existing surface complete all as specified.

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 19mm inclusive all accessories complete as specified and directed.

S&F in replacement modular step type fan regulator 120W, 2 module Make- Vinay/Anchor Roma

S&F in replacement modular switch piano type 6 amps one way one module Make - Vinay/ Anchor Roma

S&F in replacement modular switch piano type 16 amps one way one module Make - Vinay/ Anchor Roma

S&F in replacement modular Socket, 6A - 2/3 pin 2 module Make - Vinay/Anchor Roma

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module Make - Vinay/Anchor Roma

S & F in replacement of switch piano flush type 5 Amps SP one way all as specified.

S&F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose all as specified.

S&F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose all as specified.

S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/ Polycarbonate, isolated body.

M & L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Engr-in-charge.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed (Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping shall be measured as one RM)

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping medium grade not less than 25mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed (Two runs of 04Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping shall be measured as one RM)

M&L for three phase sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping medium grade not less than 25mm complete with casing capping accessories and copper cable 4 x 2.5 sq mm with two contineous earth wire of size 2.5 sq mm Note : 4 runs of 2.5 sq mm cable and two runs of 2.5 sq mm earth wire and PVC casing/capping will be measured as one meter.

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete all as directed.

S&F in replacement PVC insulated cable 2 core stranded copper conductor 0.5 sqmm complete all as specified and directed

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified (Make/Model of VTPN DB : Legrand/L&T/C&S) Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 08 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F in replacement MCB DB 04 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as directed. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals.

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F MCB TPN 63 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1.Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only. Note No (iii) to (vi) below Item No 1 of this schedule are equally applicable to this item too.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan. Make:Tibcon/Epcos

Supply only capacitor of 4 mfd for air circulator/exhaust fan. Make:Tibcon/Epcos

Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan. Make:SKF

S&F in replacment aluminum fan blades sutable for heavy duty exhaust fan of any sweep as per the sample given by the site-in-charge

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and reflxing to original position all as directed by Engineer-in-charge for following :- (a) Celling fan of size 1200 sweep.

Air circulator fans size 600 mm sweep wall mounting Oscillating type

Wall mounted/Pedstal fans size 350/450 mm sweep Oscillating.

Exhaust fan of 350/450 mm sweep.

Exhaust fan of size 600 sweep 3 Phase

M&L for painting the ceiling fan of any sweep with two coats of synthentic enamel paint by rubbing/removing the old paint carefully without any damage to the fan or fan blades complete all as specified.

Ditto all as per item No. 46 above but exhaust fan of any sweep

Ditto all as per sl item No 46 above but Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Grey) complete all as directed.

Dismantling and removing rusted louvers (set of 4) suitable for 300 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as directed.

S&F ceiling fan of sweep 1200mm, 240volts, of not less than 5 star BEE rating milk white coloured connecting up with twin core 1.0 Sqmm cable from ceiling rose including required length of down rod as per the site requirement complete all as specified. (Note: Old fan deposited to MES store yard).

S&F in replacement metallic flexible hot water connection 1200 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

M&L in replacement of ply wood sheet of 19mm thickness for mounting exhuast fans cutting to the size as required at the site including fixing the same with necessary nuts and bolt and fastner arrangement

M&L in replacement of acrylic sheet of 4mm thickness cutting to the size as required at the site including fixing the same with necessary screw arrangement and wooden patti for fixing the sheet as required at site.

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten suitable for mirror light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified .

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified.

S&F in replacement LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency suited for installation in existing T8 tube light with G13 lamp holders complete all as specified and directed.

S&F in replacement 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified .

S&F in replacement 40 W suspended LED Light with high efficiency providing soft-light and glare free symmetrical illumination including suspension kit including connecting up with twin core twisted flexible copper cable from ceiling rose to fitting complete all as specified and directed. Make: Havells Cat part No. CONSTA1144LP40WLED840SPCWH or equivalent in Luker/Philips

S&F honor board LED (warm white) fitting of 1x12 Watt individual LED lenses, chorme coloured. Make: Luker Cat part No. LMCL12 or equivalent in Havells/Philips

S&F LED bulb 1 watt of any color sample given by the Engr-in-charge with B-22 base complete all as specified. Make:Luker/Syska/Philips

S&F in repalcement wall light LED 2 x 6 Watt WW in colour including connecting up with twin core twisted flexible copper conductor cable complete all as specifed. Make: Luker Cat part no. LODWS205 or equivalent in Havells/Philips

S&F in repalcement indoor hanging type lights 40 watt WW in colour including connecting up with twin core twisted flexible copper conductor cable and hanging arrangement as reqd at site complete all as specifed and directed Make: Luker Cat part no. LHL303 or equivalent in Havells/Philips

S&F LED high glow bulb 9 watt, Warm White in colour of base B22 complete all as specified. Make: Havells/Crompton/Luker

S&F high speed wall mounted fan of sweep 400 mm,Full copper motor, auto thermal overload protection,compact style and powder coated guards & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories complete all as specified and directed.

S&F of Plastic ventilation fan of 200 mm sweep inclduing replacing the plywood as per the site requirement. (Note: Old Exhuast fan should be deposited in MES store yard)

S&F of Metal body ventilation fan of 225 mm sweep inclduing replacing the plywood as per the site requirement. (Note: Old Exhuast fan should be deposited in MES store yard)

S& F PVC unbreakable surface boxes of size 4x7. Make - Press Fit/Anchor

S&F in replacement for white cover plate with frame 3 module. Make:As per the sample given

S&F in replacement for white cover plate with frame 8 module. Make:As per the sample given

S&F in replacement for white cover plate with frame 12 module. Make:As per the sample given

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module.

S&F in replacement of 1 module Blanking plates complete all as specifed and directed Make: Vinay/Anchor Roma

S&F in replacement glass dome of chandelier at Cadet mess as per existing type and size complete all as specified and directed.

S&F in replacement table lamp fittings white colored suitable for B-22 base cap CFL/bulb with necessary accessories including surface PVC box of circular/square type complete all as specified. Model: As per the sample provided by the Site-in-charge

S&F in repalcement recess type LED COB lights 12 W with ceiling cut out of Ø 92 mm Environmental friendly, energy saving, recess mounted downlighter with separate replaceable electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully complete all as specified and directed. Make: Luker cat part no. LCOB12N or equivalent in Havells/Polycab

Taking down carefully geyser of any size/make and making good any disturbed surface and transporting geyser to MES store yard and depositing complete all as specified and directed.

S&F three phase MK-1 DOL starter including fixing on wall with all necessary accesroies and connecting to the siren of fire station with suitable copper cable including testing to the entire satisfaction of site-in-charge. Make: L&T or eqiuvalent in Legrand/Siemens

M&L for fixing DLP U-PVC trunking of body cross section 80 x 50mm inclduing the flexible cover of width 65mm with one compartment fixing to the wall with all accessories as per the site requirement complete all as specified. Make: Legrand Cat Part: 0104 12 or equivalent in approved make

S&F DLP U-PVC internal angle adjustable from 80 to 100 degree suitable for the DLP U-PVC trunking of body crossection 80x50mm complete all as specified. Make: Legrand Cat Part: 010602 or equivalent in approved make

S&F DLP U-PVC external angle adjustable from 60 to 120 degree suitable for the DLP u-PVC trunking of body crossection 80x50mm complete all as specified. Make: Legrand Cat Part: 010622 or equivalent in approved make

S&F DLP U-PVC joint for 85mm width suitable for the DLP U-PVC trunking of body crossection 80x50mm complete all as specified. Make: Legrand Cat Part: 010802 or equivalent in approved make

S&F DLP U-PVC end cap left or right suitable for the DLP U-PVC trunking of body crossection 80x50mm complete all as specified. Make: Legrand Cat Part: 0107 02 or equivalent in approved make

M&L for laying XLPE underground cable 10 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade

S&F Horizontal/Vertical storage water heater of capacity 25 Ltrs of not less than 3 Star BEE rating with copper inner tank ,water temperature indicator,manual temperature control system including fixi. Make Racold/Havells

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and directed.

S&F 160 watt LED flood light luminaire die cast housing and heat sink in aluminium extrusion and IP 66 , using by suitable MS channel complete all as specified and directed. Make Luker Cat No LFL160 or equivalent in Luker/Jaquar/Philips

S&F in replacement of 150 watt SMD LED high bay luminaire wih aluminum reflector light fitting including with inbuilt electronic drivers , necessary hanging arrangements with as per site requirement complete all as specified and directed. Make Luker Cat No LOHY150 or equivalent in PHILIPS/Havells Note : Ladders and crane shall be provided by contractor for dismantling and fixing of highbay lights and the cost is deemed to the quoted rates.

S&F LED Building Security Light/Street Light fiitting 20 W,IP-65 protection made up of die cast aluminium housing with high power LED as lighting source complete fixing with GI bracket made out of suitable size and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed. Make:Luker Catpart No. LSTE20 or equivalent in philips/Havells

SONU ENTERPRISES

Tejas Enterprises

Deccan Enterprises

M/S SHREE CONSTRUCTIONS

KSP ENTERPRISES

KESARI AND SONS

G V HAGAWANE