Kalyan Yard - Renewal of Non standard diamond crossings in Kalyan Yard (03 Nos) under Sr DEN NE Section.

in Kalyan Yard. (03 Nos)

Item- 1 Kalyan Yard - Renewal of Non standard diamond crossings in Kalyan Yard (03 Nos)

S No. Item Description of Item Unit Qty Rate Amount

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Pulling & positioning of rails accurately on cess

including supporting rails, providing required gap

and squaring at ends for renewal preparation, as

directed by Engineer in-charge.

Dismantling and removing rail of all section &

length from track, laid on any type & density of

sleeper by removing fish plates, fastenings & fish

bolts and other materials including stacking all

released materials within an average distance of

500 metres as directed by Engineer in-charge.

Note: 1.Cutting of rails shall be paid separately.

2.Work to be done under traffic block.

3 061022 For Casual/Scattered Rail Renewal work RM 2950.00 36.96 109032.00

Insertion of rails of all types & length in track, laid

on any type & density of sleeper to the specified

gauge under traffic block. Rates include fastening

of rail with sleepers with standard set of

fastenings and fixing of fish plates and bolts or, if

required, providing gap for welding and stacking

of released material without infringement within

250m as directed by Engineer-in-Charge. Note:

Rail drilling and cutting to be paid separately.

5 061032 For Casual/Scattered Rail Renewal work RM 950.00 39.13 37173.50

Through Sleeper Renewal (TSR) with PSC sleepers

involving removal existing sleepers of any type

along with fittings from track, insertion of PSC

sleepers lying along the cess / formation / slope /

toe within 5 metres height with all fittings to

specified spacing, gauge and squareness, one

round of through packing to make track fit for 20

kmph speed, dressing of ballast to standard

profile, all in accordance with the latest

provisions of IRPWM and stacking of all released

material neatly at specified places within an

average lead of 100 m as directed by Engineer in-

6 062011 For location of work not involving deep screening Each 2375.00 354.19 841201.25

Fixing of fish plates with fish bolts on a joint of all

rail sections duly lubricating fish plates/bolts with

contractor's grease graphite in running track

condition including transportation of fish plates

and fish bolts from nearest station / store / level

crossing. Note: Rail cutting & drilling to be paid

8 063030 Through Fitting Renewal (TFR) on PSC track, Sleeper 5875.00 23.70 139237.50

comprising of renewal of Grooved Rubber Pads,

Liners and ERCs without damaging PSC sleepers.

Scope includes removal of all fittings, cleaning of

rail seat, rail flange at liner seats, and eye of

Inserts with wire brushes and applying Grease

Graphite Grade "O" (IS:408) to eye of insert and

central leg of ERC with contractor's grease of

Railway's specification, fixing all fittings in correct

position and sealing liner edges with grease all

complete including collection and stacking of

released materials at nominated locations within

SSE Jurisdiction as directed by Engineer-in-

Charge. Note: All the fittings will be supplied at

SSE/Stores/Depot.

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

9 063090 Lubrication of ERCs and its liner contact area by ERC 3000.00 3.92 11760.00

removal of ERCs and Metal / GFN liners in rail

panel, cleaning of rust / scale of ERC, Metal / GFN

liners & SGCI insert by using wire brush, scrapper

/ sand emery paper etc supply and application of

graphite grease, as prescribed by Railway for

under side of liners & corresponding area of rail

foot & SGCI insert with ERCs and re-fixing the

same as per procedure prescribed in latest

edition of IRPWM with contractors grease and all

other tools & plants complete and as directed.

Note: Each ERC in this item shall constitute 1 ERC

and its Liner Contact area.

Lifting for increase in ballast cushion of existing

points & crossing layouts up to 75mm or part

thereof including approach and exit sleepers

including one round of through packing,

correcting the disturbed sleeper spacing,

tightening of fittings, boxing of ballast and

ramping out on either side at slope not steeper

than 1 in 1000 or as directed. Note: Item will be

paid only when lifting is 50mm or more.

12 083030 Boxing and profiling of ballast as per procedure TRM 175.00 27.33 4782.75

prescribed in latest edition of IRPWM including

cess dressing on both sides of track. The work will

include removing excess ballast from track and

putting the same in crib and shoulder by leading

to a maximum of 50m including crossing of track,

deweeding on ballast section etc and as directed

by Engineer-In charge.

Shifting / Slewing the existing or newly

assembled track of any rail section with any type

of sleepers and any density under line block to

correct locations & alignment and attending to

one round kutcha packing to run safely at

20KMPH speed with all contractors tools and

consumables complete and as directed by

Engineer in-charge.

13 123091 Maximum Shifting / Slewing up to 1 metre TRM 575.00 215.07 123665.25

Quick cutting with abrasive rail cutter of all types

of rail sections including wear resistant, head

hardened rails up to 110 UTS, with contractors

tools & plants, equipment, consumable with all

lead & lift etc. complete as directed by Engineer

in-charge. Abrasive Rail Cutter will be as per

RDSO Specification No. TM/SM/1 (Rev. 01 of

2012) with latest status of RDSO; Rail Cutting

Wheel Abrasive Disc will be as per RDSO

Specification No.TM/SM/2 (Rev. 01 of 2020)

Drilling holes of 16 mm to 32 mm dia. with Rail

Drilling machine including chamfering with

appropriate chamfering tools in all types of rail

section with contractor's tools & plants,

equipment, consumable with all lead & lift etc.

complete, as directed by Engineer in-charge. Rail

Drilling Machine will be as per RDSO Specification

No. TM/SM/3, dated 24.04.1991.

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

Loading, leading and unloading of 52Kg / 60Kg

rail up to 13 metre length by Railway's Rail Dolly /

Dip Lorry to the nominated location under traffic

with line protection in case road carriage is not

possible with different lead with a lift up to 5

metre during block period.

Loading, leading and unloading of PSC Sleepers

of 52Kg / 60Kg by Railway's Rail Dolly/ Dip Lorry

to the nominated location under traffic in case

road carriage is not possible for different leads

and lift up to 5 metres.

Loading, leading and unloading of all types of

P.Way fittings and all other miscellaneous

m a t e r i a l except Rails, sleepers, switches,

crossings, SEJs and Glued Joints by road vehicles

for different leads. Note: Lead shall be the

shortest motorable road length between the

points of loading and unloading.

Hiring of machinery for minor miscellaneous

works for short duration including operator/driver,

fuel, lubricants and consumable. The contractor

shall arrange all statutory permits as required by

rules and regulations prevailing in the area of

work. Payment shall be made for actual working

21 211201 JCB Backhoe Loaders 3DX Plus or similar with Hour 253.00 752.64 190417.92

minimum 1.10 cum bucket capacity

22 211202 Hydra or similar tyre mounted Pick-n-Carry crane Hour 193.00 889.42 171658.06

of 12T capacity for misc. works of handling of

23 211210 Arranging labour as and when required by the Day 605.00 730.51 441958.55

Engineer in charge, for various works under

SSE/P.Way, with contractor's T&P, equipments,

hand signal flags, etc. as per specifications,

special conditions and detailed scope of work as

furnished in the tender and as directed by the

Engineer in charge. Note: Item shall be operated

with prior approval of concerned Sr. DEN / DEN in