IMPROVEMENT / UPGRADATION OF JOINERY, CUPBOARDS, KITCHEN CABINET AND ALLIED ITEMS AT BALIDAN STAMBH, SAINIK ARAM GRAH AND SUNJUWAN UNDER GE JAMMU

Amount

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down chowkhats or frames including shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkhats or frames including shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed.

Taking down, easying and adjusting shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and as directed.

Dismantling of boarding of any description, fixed in any position with screws complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (old size), straight or curved on plan exceeding 6m in mean radius, built in cement mortar (1:6) but except bricks i.e. using serviceable bricks obtained from Srl item No. 8.00 here-in-before complete all as specified and as directed.

Material and labour for pressed steel frames of size 125mm x 60mm made of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Material and labour for pressed steel frames of size 105mm x 60mm made of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Material and labour for PCC (1:3:6) nominal mix, type C-0 (using 12.5mm graded crushed stone aggregate) as in filling of pressed steel door frames / chowkhats complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in anchoring hold fast, parapets, coping, apex plates, bed plates and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and as directed.

Material and labour for 35mm thick second class hard wood (Sal / Hollock), glazed and skeleton shutters (factory made), open, rebated and prepared to receive glass or gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I complete all as specified and as directed.

Description all as per Ser item no 14.00 here-in-before but partly panelled shutters (bottom portion) and partly skeleton shutter (top portion) suitable for fly proofing complete all as specified and as directed.

Material and labour for 35mm thick factory made second class hard wood (Sal / Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides. The size of rail and stiles as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkhats complete all as specified and as directed.

Material and labour for box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's, mild steel tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on drawing welded to mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc all as shown on drawing No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer complete all as specified and as directed. The following items shall also be included in quoted rate of this item: - (a) 3 mm thick sheet glass ordinary quality and glazing with oil putty in square. (b) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Supply and fixing aluminium anodized powder coated (minimum thickness 50 micron) sliding window (Two track) consisting of two shutter of glazed and flyproof mesh fixed on external face of window frame with aluminium beads including all necessary fittings, the following items shall be included in quoted rate of this item: - (a) Aluminium powder coated frame of section 63.5 x 38.10 mm x 1.02 mm thick with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Both shutter of glass and including self locking catch and roller etc). (c) 4.0 mm thick coloured or tinted glass glazing as in aluminium door / window / ventilator with aluminium hollow beading / glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs / RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and aluminium beads.

Description all as per Ser item No. 18.00 here-in-before but as in bath / water closet vents (sliding upside) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing powder coated aluminium sliding window (three track) consisting of two shutter of glazed and one shutter of flyproof complete all as specified and as directed. Notes: - The items shall be included as following: - (a) Aluminium powder coated frame of section 100 x 44 mm x 1.5 mm with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 20 mm x 1.5 mm thick (Two shutter of glass and one shutter of wire mesh) including self locking catch and roller etc). (c) 5.5 mm thick coloured or tinted glass glazing as in aluminium door / window / ventilator with aluminium hollow beading / glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs / RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Supply and fixing aluminium anodised grills with fittings etc (weight of grill shall not be less than 2.00 Kg per Sqm) complete all as specified and as directed.

Supply and fixing aluminium anodized powder coated frame of size 101.60mm x 44.45mm made out of 1.60mm thick aluminium section, as in door frame fixed to floor / wall with plugs and screws complete all as specified and as directed.

Supply and fixing aluminium powder coated (minimum thickness 50 micron) door shutter, rails (top, middle and style) of size 82.53 x 44.45mm and bottom rail of size 114.30 x 44.45mm made out of 1.6mm thick aluminium sheet / section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, handles 2 No's in each shutter, tower bolt, hinges etc., anodised aluminium snap beading screws complete all as specified and as directed. Note: - The following items are measured and paid separately under respective items as required: - (a) PVC panels and sheet glass will be measured and paid separately under respective item. (b) Aluminium body hydraulic door closer. (c) Double action floor spring hydraulically regulated.

Supply and fixing 5mm thick coloured or tinted glass glazing as in aluminium door / window / ventilator with aluminium hollow beading / glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs / RM including rubber gasket complete all as specified and as directed.

Supply only solar control film of 25 micron reflective type sticked to glass panes as per manufacturer's instructions complete all as specified and as directed.

Supply and fixing PVC hollow profile 12mm thickness design and pattern as approved / directed at site, complete all as specified and as directed.

Supply and fixing aluminum (die cast) body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 Kg, fixed in repairs complete all as specified and as directed.

Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs complete all as specified and as directed.

Supply and fixing mortice lock 4 lever vertical type size 100 mm long complete all as specified and as directed and fixed in repair.

Supply and fixing in repair second class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II complete all as specified and as directed.

Description all as per Ser item No 31.00 here-in-before but wood grain printed PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with pinted sheet complete all as specified and as directed.

Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of mild steel tube for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplied and fitted in the frame at site as per specification and drawings shown in SSR Part-II complete all as specified and as directed.

Description all as per Ser item No. 33.00 here-in-before but wood grain printed PVC sheet used instead of plain colour PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading complete all as specified and as directed.

Material and labour for hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fixing 5mm thick prelaminated PVC sheet in strips and channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partition inclusive of solvent cement complete all as specified and as directed.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing onto wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Supply and fixing in repair 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, including necessary wooden or PVC lipping all around fixed with screws / nails to timber frame or wooden cleats work as in cupboards shutters, shelves etc complete all as specified and as directed.

Supply and fixing in repairs 18mm thick factory made solid panel PVC board with 2mm thick 3D wood grain moulded PVC sheet on the front face and 2mm prelaminated PVC sheet on back face with PVC tape for lipping in Kitchen cupboard complete all as specified and as directed.

Supply and fixing in repair continuous (piano) hinges mild steel bright finished or electrogalvanised, width of flaps 30mm when open complete all as specified and as directed.

Supply and fixing in repair magnetic catch, heavy duty, in cupboard shutter complete all as specified and as directed.

Supply and fixing for 50 mm dia fancy type polished wooden knobs fixed to cupboard shutters with screws complete all as specified and as directed.

Supply and fixing 25 mm dia stainless steel rod as in cloth hanging rod for Cupboard etc fixed with wooden cleats / brackets complete all as specified and as directed.

Supply and fixing for butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised handles 150 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised handles 125 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing mild steel, 300mm, ordinary rat tail rod patttern springs including roller and roller plate complete fixed with screws or necessary welding to pressed steel door frame complete all as specified and as directed.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in repair with stainless steel wire staples complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repair complete all as specified and as directed.

Supply and fixing aluminium anodised, handles 125 mm of extruded section and fixed in repair complete all as specified and as directed.

Supply and fixing aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed in repair complete all as specified and as directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete as fixed in repair complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones exceeding 1.5 Sqm complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square not exceeding 0.5 Sqm each complete all as specified and as directed.

Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod (Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part thereof with stainless steel brackets (Model:- SS 25 BR, Vista) near to ends with stainless steel finials (Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends complete all as specified and as directed. Note: - The drapery rod shall be projecting 150 mm outer side from the clear opening of doors / windows. (including necessary fittings).

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 450mm x 300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster of any description on bricks or stone walls or from concrete surfaces including racking out joints, hacking for key, scrubbing complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper, white or tinted shade complete all as specified and as directed.

Material and labour for preparing newly plastered or concrete surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down rolling shutters of following sizes not exceeding 8 Sqm, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Taking down rolling shutters of following sizes exceeding 8 Sqm but not exceeding 12 Sqm each, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Taking down rolling shutters of following sizes exceeding 12 Sqm but not exceeding 20 Sqm each, replacing worn out / unserviceable parts with new ones, overhauling, applying grease / oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Taking down steel door (hanger / Tech stores door) each leaf area exceeding 2.0 Sqm but not exceeding 6 Sqm with bed blocks, pintel hinges and hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new / old pintel hinges, handles, lock system and hold fasts as required complete all as specified and as directed. Note: - Welding, bed blocks, pintel hinges and hold fasts will be measured and paid for separately.

Taking down steel door (hanger / Tech stores door) each leaf area exceeding 6 Sqm with bed blocks, pintel hinges and hold fasts, rectifying the defects such as straightening, welding etc and refixing in position with provision of bed blocks, new / old pintel hinges, handles, lock system and hold fasts as required complete all as specified and as directed. Note: - Welding, bed blocks, pintel hinges and hold fasts will be measured and paid for separately.

Taking down collapsible steel gates each exceeding 4 Sqm with pintel hinges, top and bottom runners, channel pickets and hold fasts, rectifying the defects such as straightening, welding, rivetting, securing runners with hold fasts and brackets etc and refixing in position with provision of bed blocks, new / old pintel hinges, handles, lock system and hold fasts as required and complete all as specified and as directed. Note: - Welding, bed blocks, pintel hinges and hold fasts will be measured and paid for separately.

Material and labour for welding in repairs not exceeding 2.5 cm in length and thickness of metal to be welded exceeding 6mm but not exceeding 9mm complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornies, pillasters by brooming down or steel wire smoke, root moulds, moss and efforescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornies, pillasters by brooming down or steel wire smoke, root moulds, moss and efforescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of oil bound distemper on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Material and labour for mild steel structural framed work confirming to Fe 410-W (Grade 'E'-250) quality 'A' as in door or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engineer-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S PRITHIVI RAJ AND SONS (BID ID -3070318)

M/S Sukhmani Construction Co. (BID ID -3074170)

M/S TRIKUTA BUILDERS (BID ID -3074437)