Enhancement of Integrated Passenger Information System at 6 locations of Nagpur division Central Railway.

"SUPPLY OF LIU OFC TERMINATION UNIT (Rack mountable 24 port) along with supply of all accessories suitable for Mono/Multi (as per site requirement) mode fiber like LC adaptor plates, LC connectors, LC pig tails and blank plates etc. ( Inspection by Consignee) "

Maintenance Free Earth as per RDSO/SPN/197/2008 or latest consisting of : 1) Copper 02 bond steel electrode 3 Mtr long 17mm dia with copper bonding thickness of min. 250micron & UL listed & marked-01 No. (2) Earth enhancement compound RDSO Approved in sealed bag of 10 kgs - 03 No. (3) Copper strip 150 x 25 x 6mm - 02 No (4) Copper Strip 300 x 25 x 6mm- 01 No (5) 35 Sqmm Copper Cable to connect earth electrode to MEEB - 15Mtr Approx. ( Inspection by Consignee)

Supply of DWC HDPE pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver 1.1 with Amd.1 or latest. ( Inspection by Consignee)

Supply of RCC pipes half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. ( Inspection by Consignee)

" Fabrication, supply and fixing of various type of MS flat clamps on girder bridges/rocky area on GI pipes/its coupler as per drawing with requisite no. of nut and bolts as per site requirement and as per the instructions of Railway Engineer at site."

" Installation of unit earth as per RDSO/SPN/197/ver I or latest, to construct earthing of </=1 Ohm consisting of a digging the earth to required depth, insertion of electrode, filling of earth enhancing compound & construction of chamber, measurement of earth value and all other work of earthing as per code of practice. All the consumables for mounting the copper tape inside the relay room, Exothermic weld materials and tools & fixtures for the welding copper tapes nd Electrodes etc shall be arranged by the contractor.."

Excavation of cable trench as per cable route plan, 1.0 mt. deep and 300mm wide along side thew track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer 03 of 50mm thickness afer clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

Excavation of cable trench as per cable route plan, 1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm 04 thickness afer clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

Cutting of all types of Roads/platforms (except concrete type) for trenching and 05 excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 807

Fixing of GI pipes for crossing the culverts, bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.

Digging of trench 1.0 M deep from rail flange/road level (for LC) and, 0.3 Mtr to 0.6 07 Mtrs wide and back filling after placing of DWC/RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg No SK 806

Laying of DWC/RCC pipes alongwith collars / RCC Half round pipes in trenches at places of track and road crossings, platform cutting etc.

Laying of signalling/Power/Telecom cable of various cores/sizes in trenches.

Where ever depth of 0.5 m cable trench is not feasible, cable shall be protected as under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench.

Laying of GI pipes in on bridges/culverts/concrete drain/ mountain ridges etc. with 11 suitable GI bend shall be provided where there is turning of pipe as per instructions of the site engineer. GI Clamps at every 2 m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per instructions of the site engineer. 100 mm dia. Drg No SK 808

Horizontal boring of cable duct of minimum 2.0 Mtr depth along with laying of 120mm HDPE pipe for track crossing with minimum depth reckoned from bottom of the rail/Road crossing with minimum depth reckoned from ground level. The work shall be done as per extant practice & 12 instructions of site engineer. Preparation of site for Horizontal Boring shall be carried out in presence o f Railway Representative. HDPE will be supplied by Railway. Note:- Contractor shall provide all material required for boring and adequate nos. of labours for proper laying of cables into the bore. Cable shall be laid cautiously so that it should not get damage due to rough handling & pressure on cable.

Transportation of signaling material/equipments including loading and unloading in 13 10MT vehicle, anywhere to anywhere, and stacking at destination as per instructions of SSE in- charge as per inventory. For carrying heavy materials like cable drums, DG set, Electrical lifting barrier pedstal, IPS, Batteries, Point machine etc.( 1 NOS = PER TON/PER KM )

Laying of HDPE duct in trench and its protective work as per direction of site engineer.

Blowing/Drawing of OFC cable in HDPE/DWC duct and protective work, as per direction of site engineer.

Supply of single mode 6 fibre armoured optical fibre as per ITU-TG 652D cable . Make- Dlink/Molex/Amp/Finolex/sterlite or similar ( Inspection by Consignee)

"supply of 06 core optical fiber cable Un-Armoured Single Mode. Make: D- Link/Finolex/Sterlite or similar"( Inspection by Consignee)

HDPE duct 40/33mm As per RDSO/SPN/TC/45/2013 Rev. 2.0 with Amendment 3.0 or 03 later. For each KM of HDPE duct following items are to be supplied a)- End plug-2 No. b)- Cable sealing plug- 2 No. c)- Plastic couplers slip fit/push fit type-2No. d)- End plug to be provided along with drum-2 No. (Inspection by Consignee)

Supply of UTP CAT-6 Cable 23 AWG as pr TIA/EIA - 568 C.2 Standards latest with PVC jacket and four twised pairs for indoor installation Make D-Link, DIGISOL, FINOLEX MOLEX or similar. ( Inspection by Consignee)

Supply of STP (Shielded twisted pair) CAT 6 cable conforming to TIA/EIA 568-B.2-1 or latest .Make- D link, Digisol,Finolex,Molex or similar. ( Inspection by Consignee)

Supply of PVC switch board 10 pair 0.5mm dia. annealed copper telephone cable, conductor solid annealed bare copper 0.5mm diameter as per Tec spec. No. GR-WIR 06/03 march 02 or latest. Make: NETWORK CABLES, Finolex, Delton OR SIMILAR ( Inspection by Consignee)

Supply of multi strand PVC insulated flexible power copper cable, size: 3 coreX2.5 sqmm individually PVC insulated &overall PVC sheathed 1.1 KV Grade conforming to IS :694 and 8130. Make: HAVELLS /FINOLEX /POLYCAB /KEI or similar. ( Inspection by Consignee)

Supply Installation & commissioning of 12 Port LIU Rack mountable. LIU should be provided for terminating the optic fiber cables. It shall provide minimum bending radius and the 08 splice trays shall function as a splice cover for pigtail splicing. Cable glands shall be provided for secured anchoring of incoming cables. Rubber grommets shall be provided at the cable entry point for tight sealing. The splice tray shall be made of ABS materials. LIU should be of reputed make. ( Inspection by Consignee)

Supply of wall mountable OFC jointing kit (6 fiber) along with splicing & termination of fiber ( Inspection by Consignee)

Supply of Single Mode OFC Patch Cord. Length -3 Mtr. Detailed specifications as per Chapter III of tender document . Make - Syrotech or similar with connector type as per site condition for terminations/extension of ofc cables. (Inspection by consignee)

Splicing/Dropping/Termination of each fiber/pigtail in LIU/IO BOX/Terminal Joints 11 through fusion splicing for termination of OFC cables. The fibers terminated shall be tested and test report (hard & soft copy) shall be submitted to railways site incharge for records. each fiber shall be properly marked with necessary ferrules/tags. ( Inspection by Consignee)

Supply of RJ-45 patch cord Cat-6 STP, 2 mtrs long. Make D-link,Digisol,Spectra or similar.( Inspection by Consignee)

Supply of RJ-45 LAN connector. Make D-link,Digisol,Spectra or similar. ( Inspection by Consignee)

Supply of 24 port RJ 45 socket patch panel. Detailed specifications as per Chapter III of tender document. Make - Avaya lucent /AT&T/Comscope or similar mountable in 6 U rack. (Inspection by consignee)

Supply of Layer-2 managed POE Switch (8 ports 10/100/1000 BASE-T ports, 2 SFP 1G uplink ports with SFP module . Specifications as per Chapter 3 of tender document. Make - Cisco, HP,Juniper , Alcatel, D link, TP link or similar. (Inspection by consignee)"

Installation, Testing & Commissioning of L-2 POE switch 24 port & 8 port LAN manageable switch.

"Supply of media converter with required accessories and including all necessary connecting cable Make HCL/Digisol/ Dlink/Mrotek/iball or similar. Specifications as per Chapter 3 of tender document. (Inspection by consignee)

Supply of 19 inch 9 U wall mountable rack and installation of it. rack shall consist of 18 600mm depth, front toughened glass door with secure lock, 02 Nos. of fan for heat dissipation with 01 No. rack tray & power distribution unit. Accepted make HCL,APW, Rittal, President or similar. (Inspection by Consignee)"

Supply of GI pipe with thread collar of 40mm nominal bore, specification no. IS-1239 medium grade of TATA/JINDAL/ZENITH BIRLA make or similar ( Inspection by Consignee)

Laying of OFC/STP/Power/data/ Telecom/PA cables in trenches & casing along with fixing of casing capping.

Cutting of platform surface Tile/slab) for a depth of 15cm and a width of 15cm and 21 refilling/reconditioning /concreting/repairing the platform after laying HDPE pipe and cable. Cutting should be done with arble cutting achine in proper manner and restore the same as before in such a manner that aesthetic of the platform is not disturbed.

Installation of perforated type cable tray with necessary MS angle suspension supports/treated rod support anchor fasteners/threaded nuts & bolts etc. Complete Maximum height of suspension should Not exceed 500 mm or as advised by Railway's site engineer.

Supply of PVC Rigid/Conduict pipes and its fixing accessories 25mm x 1mm thickness o f Precision/PLASTO/Presto teak make or similar. Sample to be approved before supplying. (Inspection by Consignee)

Supply of Central Data Controller(CDC) and Supply and installation of necessary software as per RDSO Spec No. RDSO/SPN/TC/108/2019 Ver-1 or later.Central Data Controller (CDC) 24 shall consist of two CPU connected through central data dswitch CDS for data synchonization. One 18.5'' minimum LCD/TFT colour moniter or higher through keyboard-video-mouse KVM switch. Audio Video selection device with speaker and microphone shall be provided for live announcement. The work to be executed as per instructions of Engineer in charge. (Inspection by RDSO).

Installation & Commissioning Of Central Data Controller (CDC) and as per RDSO Spec No. RDSO/SPN/TC/108/2019 Ver-1 or later and as per instructions of Engineer in charge.

Supply, installation, testing, commisioning of Integrated Driving Software for train arrival/departure, train coach guidance, TIB Auto announcement system as per RDSO Spec No. RDSO/SPN/TC/108/2019 Ver-1 or later . (Inspection by RDSO).

Supply of Platform Data Controller (PDC) as per RDSO Spec No. RDSO/SPN/TC/108/2019 Ver-1 or later and as per instructions of Engineer in charge. (Inspection by RDSO).

Installation & Commissioning Of Central Data Switch (CDS) /Platform Data Controller (PDC) (Covered in supply portion of schedule) and as per RDSO Spec No. RDSO/SPN/TC/108/2019 Ver-1 or later and as per instructions of Engineer in charge. (Inspection by Consignee).

System integration, inter connection with existing system/NTES national train enquiry system coach guidance board train indication board and others this includes setting ogf software programming all sundry item like patch cord connector to be supplied by contractor and executed as per railway site engineer. (Inspection by Consignee). 2588465.9

Installation & commissioning of Outdoor Video Display (OVD) OVD Units (6 Lines) along with required MS structure as per RDSO/SPN/TC/108/2019 Ver-1 or later ( Inspection by Consignee)

Supply Installation & Testing of, Display Unit industrial grade (TV) Screen 32 size:55,Resolution:3840x2160 UHD, Type:4k Ultra HD. Make: Samsung, Sony or LG or similar. Detailed Specification as per RDSO/SPN/TC/108/2019 Ver.1 or later. It Shall be capable of displaying Coach Guidance information at stations.(Inspection by Consignee)

Cutting of wall for insertion of 1" dia PVC conduict pipe for concealed wiring, fixing 33 hardware for fixing the conduit along with its supply and then replaster it with cement and sand mixture and then painting with matching color as per existing color of the wall proper joints in pipes, bends / elbow's / junction box are to be provided as per site requirement. (Inspection: Consignee) 1463390.5

"Supply of in-built GNSS based cable route tracer with 10W, 500 mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cmor better, 34 with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTK enabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP and RTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200GS or similar." (Inspection by Consignee)

Supply of Splicing Machine as per technical specifications in chapter III of tender document Make:- Fujikura or similar (Inspection by consignee)

30 decibel Single Mode Optical Time Domain Reflectometer (OTDR). Specification as per chapter 3 of tender document. Make: fibershot or similar (Inspection by consignee)

Supply of Optical Power meter with Visual Fault Locater. Specifications as per Chapter III of tender document. Make brand- PDR or similar (Inspection by consignee)

Digital Fault Locator, TDR based Cable Fault Locator for metallic cables viz LV power cables/control cables fault location capability 15 KM, Accuracy +/- 01 M at 3000 Meters. One step 38 setup, configurable for any cable type. Measures distance to fault in feet / meters. Two pair test capability. Automatic instrument control Mode, splash and drip proof, splits/Crosstalk mode. Intermittent fault location, on-line tutorials, large backlit display, input protection plus/ minus 200V, DC plus peak AC to a maximum of 440 Hz. Battery operated, including test loads (Min.2 pair) carrying case, batteries, user manual and Calibration Certificate. ( Inspection by Consignee)

A4 and Legal Monochrome (Black) Laser Computer Printer Make: HP Laser 1008w ,brother or similar. ( Inspection by Consignee)

MULTI FUNCTION LASER PRINTER CUM SCANNER: MONO LASER PRINTER MFP 40 PRINTER SIZE-A4, LETTER PRINTER SPEED 28PPM ,PRINT MEDIA -MINIMUM 90 GSM , ADF AND FLAT BED SCANNER WITHBYPASS TRAY , AUTO DUPLEX,FACILITY, SCANNING, LAND CONNECTIVITY, WI-FI, WI-FI DIRECT FUNCTIONALITY. MAKE : BROTHER MFC-L2701D, CANON , HP, EPSON OR similar. ( Inspection by Consignee) "

AMD/Intel Core i5-12400 All in One PC, 8GB RAM, 1TB HDD @ 7200 RPM, pre loaded 41 Windows 10 OS and MS Office, LED monitor size 21.5 inch or more, standard keyboard - mouse, wireless and sufficient ethernet, HDMI ports shall be available. Brand: HP, DELL, ACER, LENOVO or similar ( Inspection by Consignee)

Supply of LASER JET Colour PRINTER (fully loaded cartridge) with additional Spare Cartridge's (2Nos). Make Brother MFC T920DW or similar.(Inspection by consignee) 3230955.2

Supply of Optical Remote Unit for VHF simplex system as per specifications No. 43 RDSO/SPN/TC/109/2023 ver 1 with latest Amendment/ Revision and technical specs attached with main and stand by connections to Optical Master Unit. One ORU should be able to connect minimum three OMUs (two at stations and one at in between tunnels). The proposed ORU shall be compatible with existing system (Inspection by RITES)

Installation, Configuration, testing, monitoring and Commissioning of Remote Optical unit along with required accessories. Also includes configuration with NMS.