WBIW/EE/AID/e-NIT-01 /2026-27 , Sl-01

Supplying at site High Density Polyethylene (HDPE) bag of size 0.84m x 0.38 m conforming to BIS: 14252: 2015 for bank protective works including all cost of cost of transportation on road by all means, including other incidental charges complete. (Note: Payment will be made subject to the result of 3rd Party Testing, to be done by the Engineer-in-charge departmentally.) Paragraphs 2.8 including the sub-paragraphs, i.e., 2.8.1 and 2.8.2 under the Chapter of “Specification for Works” in the USoR shall be reproduced and included in the tender document as“Specification and Special Terms & Conditions for High Density Polyethylene (HDPE) Bags” in case of use of this item in the estimate.

Labour charges for filling HDPE bags with filler materials (earth/sand), machine stitching the open end of the bag with thread as per design and placing the same on slope or dumping from bank within initial lead of 30 m and all lifts including carriage and hire charges of all materials and equipments but excluding the cost of filler materials as directed by Engineer-in-Charge (Volume of earth/sand filled bag should not be less than 0.0328 cum).

Supplying Jhaw / Eucalyptus bullah piles at work site, including dressing and making one end pointed (iii) 15 cm av. Diameter

Labour for driving Jhaw / Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles in position, protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. (iii) 15 cm av. diameter

Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site (a) Width of thinner end above 10 cm. and less than 15 cm. (i) Jhaw / Eucalyptus

Darma mat stiffened with split bamboo wailing pieces in both direction @ 50 cm c/c, placed, fitted and fixed with frame work or behind piling works and tied with 22 SWG, GI wire as per direction including cost, carriage and supplying all materials to site complete. A) Where boats are not necessary

Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metre and initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil.

Making filter with well graded 40 mm down ballasts and laying uniformly behind weep holes, below pitching on bed, side slopes including supply and carriage of all materials to site including preparing bed with earthwork up to 30 cm depth, where necessary and compacting with wooden mallet after laying to achieve designed section as per direction of the Engineer- in - Charge (measurements will be on finished work / in stack after deducting necessary void).) (a) Jhama ballast

Supplying Nylon cage netting 1 metre x 1 metre x 0.6 metre size with knot having mesh size 17.5 cm x 17.5 cm constructed with nylon thread (210 x 24) having tensile strength not less than 250 Kg. / sq. cm. including carriage, delivery and stacking at site inclusive of all taxes complete.

Labour charges for dumping and placing in position properly filled in Nylon crates with filled in HDPE bags (minimum 13 nos.) with local earth or sand, sewing and tying the crate with nylon wire within a lead of 150 m. and all lifts in river slope or bed by cutting trenches upto 50 cms depth, if necessary, or by boat including cost of hire charges of boat, boatmen and other necessary equipments and also including cost of bags, carriage and charge of filling bags with earth / sand but excluding cost of nylon crate as per direction of the Engineer – in – Charge. NB:- Volume of each earth/ sand filled bags should not be less than 0.0328 cum). Size of Nylon crate is 1metre X 1metre X 0.60 metre. (a) Where boats are not necessary.