REPAIRS TO STEEL/WOODEN FURNITURE AND REVIEWING OF CHARPOY GI PIPE WITH NYLON NEWAR AT NDA KHADAKWASLA

Amount

CHAIR DINING : FD-279, 228 Taking down carefully unserviceable rail and S&F rail made of made of 1st class teak wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable rear legs and S&F rear legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable stiffeners and S&F stiffners made of 1st class teak wood as per drg.

Taking down carefully unserviceable back rest and S&F back rest made of 1st class teak wood as per drg.

Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe complete all as directed

Taking down carefully unserviceable corner and S&F new corner made out of 1st class teak wood complete all as shown on drg.

CHAIR WRITING : FD-250, 280 Taking down carefully unserviceable rail and S&F rail made of made of 1st class teak wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable rear legs and S&F rear legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable stiffeners and S&F stiffners made of 1st class teak wood as per drg.

Taking down carefully unservicable arm rest and S&F arm rest made of 1st class teak wood as per drg.

Taking down carefully unservicable back rest and S&F back rest made of 1st class teak wood as per drg.

Taking down carefullyf unserviceable shoe and S&F new PVC/hard rubber shoe complete all as directed .

Taking down carefully unserviceable corner and S&F new corner made out of 1st class teak wood complete all as shown on drg.

CHAIR EASY : FD-229 Taking down carefully unserviceable rail/bead and S&F rail/bead for caning made of 1st class teak wood with suitable holes for caning as per drg.

Taking down carefully unserviceable front legs and S&F front legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable rear legs and S&F rear legs made of 1st class teak wood as per drg.

Taking down carefullyf unservicable seat frame and S&F new seat frame of 1st class teak wood of section 70 mm x 40 mm of size 510 mm long in front and 480mm long in rear as per drg.

Taking down carefully unservicable back frame and S&F new back frame of 1st class teak wood of section 70 mm x 40 mm of size 510 mm long in front and 480mm long in rear as per drg.

Taking down carefully unservicable arm rest and S&F new arm rest of size 65x25mmx 610mm as per drg.

Taking down carefullyf unserviceable shoe and S&F new PVC/hard rubber shoe complete all as directed

Taking down carefully unserviceable corner and S&F new corner made out of 1st class teak wood complete all as shown on drg.

Taking down carefully unserviceable cane form different types of chairs and other furniture articles and M&L for recaning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown & as directed.

Taking down old existing unserviceable cane from chair verandah and M&L for reweaving the same with new 4mm wide plastic cane oval type best quality, in seat and back, including provision of rubber shoes to the legs, complete all as shown on drawing and as directed.

BED PLYTOP : FD-246 Taking down carefully unservicable long rails of bed plywood top and S& F of new long rails made of 1st class teak wood all as spefied and shown on drawing.

Taking down carefully unserviceable ply wood teak face and S&F 4mm thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board rest all as per drg.

All as per item No 27 above but size 780 x180 mm for foot boards.

Taking down carefully unserviceable plywood top nad S&F new plywood 12 mm thick BWR confirming to IS: 303 as shown on drg.

Taking down carefully unserviceable bottom rails of bed ply wood top and S & F of new bottom rails of 1st class teak wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable legs of head board and S & F of new legs of head board made of 1st class teak wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable legs of foot board and S & F of new legs of foot board made of 1st class teak wood of required shape and size all as specified and shown on drawing.

Taking down carefully unserviceable corner and S&F corner made of 1st class teak wood to strengthen long rails and legs all as specified by Engr-in Charge.

TABLE BED SIDE : FD-276 Taking down carefully unserviceable top and S&F top of table bed side and providing new top of Prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown in drg.

Taking down carefully unserviceable sides and S&F sides of table bed side and providing new sides of Prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown in drg.

Taking down carefully unserviceable shelf and S&F shelf of table bed side and providing new shelf of Prelaminated Particle board exterior grade 12 mm thick of same size and shape as shown in drg.

Taking down carefully unserviceable ply from the back and S& F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade all as specified and shown in drg.

PEG TABLE : FD-277 Dismantling of old and unserviceable top and S&F new top made of pre laminated Particle board exterior grade 18/19 mm thick including 4 mm thick teak wood beading all round all as specified and directed.

Taking down carefully unserviceable legs and S&F new legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable long rail and S&F new long rail made of 1st class teak wood as per drg.

Taking down carefully unserviceable short rail and S&F new short rail made of 1st class teak wood as per drg.

Taking down carefully unserviceable Stiffener and S&F new Stiffener made of 1st class teak wood as per drg.

TABLE CENTRE : FD-274, FD-235 Taking down carefully unserviceable top and S&F new top made of prelaminated Particle board exterior grade 18/19 mm thick including 4 mm thick hard wood beading all round all as specified and directed.

Taking down carefully unserviceable legs and S&F new legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable short rail and S&F new short rail made of 1st class teak wood as per drg.

Taking down carefully unserviceable long rail and S&F new long rail made of 1st class teak wood as per drg.

TEAPOY WOODEN : FD-278 Taking down carefully unserviceable top and S&F new top made of pre laminated Particle board exterior grade 18/19 mm thick including 4 mm thick hard wood beading all round all as specified and directed.

Taking down carefully unserviceable legs and S&F new legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable short rail and S&Fnew short rail made of 1st class teak wood as per drg.

Taking down carefully unserviceable long rail and S&F new long rail made of 1st class teak wood as per drg.

TABLE DINING 6/8 PERSONS : FD-273,30(M) Taking down carefully unserviceable top and S&F new top for table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated particle board exterior grade ISI marked with teak wood beading all round 4 mm thick all as shown on drg.

All as per item No 51 but for table dining 6 persons of size 1500 x 900 x 18/19 mm complete.

Taking down carefully unserviceable legs and S&F new legs of size 75 x 40 x 742 mm made out of 1st class teak wood all as specified and shown on drg.

Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1800 mm made out of 1st class teak wood complete all as shown on drg.

Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1500 mm made out of 1st class teak wood complete all as shown on drg.

Taking down carefully unserviceable short rails and S&F new short rail of size 25 x 100 x 900 mm made out of 1st class teak wood complete all as shown on drg.

Taking down carefully unserviceable stiffener and S&F new stiffener made out of 1st class teak wood 25 mm thick and 100 mm wide complete all as shown on drg.

Taking down carefully unserviceable corner and S&F new corner made out of 1st class teak wood complete all as shown on drg.

Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe complete all as directed.

Desk (Steel) : FD-107,1021 Dismantling of under mentioned parts of 1220 mm Desk (Steel) (FD-107,1021) and S&F Box of desk with 18/19mm thick prelaminated particle board type II grade I of approved shade duly fixed with 4mm thick TW edging wherever required and French polish to be done on wooden surfaces.as per Drg and as directed.

FOOD TROLLEY STEEL : TP Dismantling and replacement of unserviceable parts of food Trolley/Waste Food trolley stainless steel and Removing dents from the frames and replacement of broken corner and fixing the new corner bracket with welding. (Welding to be done with SS rod (denting and welding only).

Ditto all as per item No 61 above but replacement of old unserviceable castor wheel with new castor wheel of required size and of approval quality (as per sample in the yard).

Ditto all as per item No 61 above but repair of the damaged tray by welding with SS rod at required places, corners and providing new handle of 8mm SS rod of required size

Ditto all as per item No 61 above but repair of the damaged Waste Food trolley Square Bucket Full welding with SS Rod at six sides of Square Bucket .

Ditto all as per item No 61 above but fixing of the damaged/Broken Frame by welding with SS rod at required places,

TABLE OFFICE CLERK & OFFICE OFFICER STEEL : FD-84/1004FD-1002/1003/84(M) Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Adjustment of drawers where ever reqd as directed.

Taking down old unserviceable locks of drawer and S&F locks of any type 5 lever as per drg.

Taking down old of unserviceable shoe and S & F new hard rubber shoes as per drawing

TEAPOY VERANDAH : FD-208/255 Taking down old unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing.

Taking down old unserviceable top and providing new top made of pre laminated Particle board 18/19 mm thick exterior grade including 6 mm thick teak wood beading all round all as per drawing.

TABLE STEEL 900 x900 x760 mm : FD-1009 Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Repair/Welding of table 900x900x760 steel, Welding of dislocated parts of tubular steel sections at required places.

TABLE BED SIDE STEEL : FD/E6/MAP/15R M & L for Dismantling of old unserviceable parts and S&F of new parts of Table Bed side MAP and S&F Top size18" x 18" of 18mm pre-laminated particle Board 18mm type-II Grade-I duly fixed with 4mm thick TW beadging as per drawing.

- Ditto - as per Sr No.75 but S&F side planks size 16" x 16½" of pre-laminated particle Board 18mm type-II Grade-I duly fixed with 4mm thick TW beadging as per drawing.

- Ditto - as per Sr No.75 but S&F Back planks size 21" x 16" of pre-laminated particle Board 18mm type-II Grade-I duly fixed with 4mm thick TW beadging as per drawing.

- Ditto - as per Sr No.75 but S&F Drawer size (16" x 16¾" x 3¾"(H)) of pre-laminated particle Board 18mm type-II Grade-I duly fixed with 4mm thick TW beadging as per drawing.

TABLE COMPUTER : FD/E6/MAP/3 Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable key board tray and S & F new key board tray made out of 18/19 mm prelaminated Particle board exterior grade on telephoninc channel of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable bottom shelf and S & F new bottom shelf made out of 18/19 mm prelaminated Particle board exterior grade with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable drawer and S & F new drawer made out of 18/19 mm prelaminated Particle board exterior grade on telephoninc channel of shape and size with 4 mm thick teak wood beading all around as shown in drg. Note :- PAINTING :-Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and painting one coat to a uniform finish with synthetic enamel paint complete, shade as directed

CHAIR COMPUTER MAP /CHAIR WRITING MAP : TP/FD/E6/MAP/12 & FD/E6/MAP/01 Taking down old unserviceable seat of chair writing MAP/computer MAP and S&F with new seat made out from leatherite rexine cloth, best quality exactly shall be as per the sample approved including U foam cushion of 3" thick 32 density as approved, complete all as specified and directed.

Taking down old unserviceable back of chair writing MAP/computer MAPand S&F with new back made out from leatherite rexine cloth, best quality exactly shall be as per the sample approved including U foam cushion of 2" thick 32 density as approved, complete all as specified and directed.

Taking down old unserviceable seat of chair executive and S&F with new seat made out from leatherite rexine cloth, best quality exactly shall be as per the sample approved including U foam cushion of 3" thick 32 density as approved, complete all as specified and directed.

Taking down old unserviceable back of chair executive and S&F new back made out from leatherite rexine cloth, best quality exactly shall be as per the sample approved including U foam cushion of 2" thick 32 density as approved, complete all as specified and directed.

Taking down old unserviceable PVC wheel from chair computer MAP/ executive/revolving and supply and fix new PVC wheel of best quality as approved, complete all as specified and directed.

Taking down old unserviceable hydraulic height adjustment lift of chair computer/chair executive/chair visitor and supply and fix hydraulic cylindrical type height adjustment lift of best quality as approved, complete all as specified and directed.

Taking down old unserviceable PVC pedestal from chair computer/chair executive and supply and fix new five legged PVC moulded, black, pedestal with PVC wheel of best quality as approved, complete all as specified and directed.

CHARPOY G I PIPE WITH NYLON NEWAR : FD 220 Retaping the Charpoy G I Pipe with approved white newar tape nylon of size 50 to 55 mm (as per drawing) .

All as per Ser No. 90 but S&F MS check nut as per drg

All as per Ser No. 90 but S & F 3-way elbow as per drg

All as per Ser No. 90 but S & F 3-way elbow as per drg

KASTURILAL HARICHAND OHRI AND SONS