GE/ALP (8116B) KOLKATA OF 2022-23

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc. of any descriptions complete all as specified and as directed.

Material and Labour for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and Labour for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster of any description, including racking out joints, hacking for key, scrubbing down with water etc incl necessary arrangement for working platform complete all as specified and as directed (upto 12 storey bldg).

Material and labour for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and fair with out using extra cement including necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement including necessary scaffolding complete all as specified and directed. (upto 12 storey building)

Material and labour for rendering 10mm thick in cement mortar (1:3) in ceiling incl necessary arrangement for working platform complete all as specified and directed (upto 12 storey building)

M&L for fixing chicken wire mesh to spalled RCC slab, column, beam etc and applying dubbing out average 10mm thick with cement mortar (1:6) on irregular face of walls or ceiling surface, make rough to receive top coat of plastering etc complete all as specified.(upto 12 storey bldg).

Taking down shutters of any description exc. 1 sqm and n. exc. 2 sqm each and resecuring or easing & adjusting and refixing in same opening complete all as specified and as directed (upto 12 storey building)

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed (upto 12 storey building)

Taking down chokhat with shutter( without taking down shutters from the frame) n.exc 1.5 sqm and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Supply and Fixing second class hard wood (SAL), plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed (upto 12 storey building)

Supply and Fixing 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round complete all as specified and as directed (upto 12 storey building)

Supply and Fixing 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and as directed (upto 12 storey building)

Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified and as directed (upto 12 storey building)

Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening complete all as specified and as directed.

Supply and Fixing windows with side hung shutter including projecting type hinges with steel handle, and steeel peg stay, complete with glazing bars, dovetailed or welded

All as per item No 18 above but without glazing bars.

Supply and Fixing Steel ventilator with top hung shutter including hinges, steel peg stay complete including one shop coat primer all as specified and as directed (upto 12 storey building)

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples including of dismentling complete all as specified and as directed by Engr in charge..

S & F in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples including of dismentling complete all as specified and as directed.

Supply and Fixing stainless steel butt hinges, medium weight, cold rolled of size 100 mm complete all as specified and as directed.

Supply and Fixing 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and Fixing 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

Supply and Fixing Extruded aluminium alloy handles, 150mm long fabricated type, anodised complete all as specified and as directed.

Supply and Fixing mild steel of grade Fe-290 in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, clamps, hold fasts and similar small articles complete all as specified and as directed (upto 12 storey building)

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones. complete all as specified and as directed.

Supply and Fixing 3mm thick sheet glass ordinary quality & glazing with oil putty in squares n.exc 0.5 sm in each pane. complete all as specified and as directed.

Supply and Fixing 4 mm thick, sheet glass ordinary quality & glazing with oil putty or aluminum clips, in squares exc. 0.5 SM in each pane complete all as specified and as directed (upto 12 storey building)

Supply and Fixing figured glass 3mm thick, pin head type & glazing with oil putty in squares not exc. 0.5 SM in each pane complete all as specified and as directed (upto 12 storey building)

Supply and Fixing in repairs floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate 150 mm. complete all as specified and as directed.

Supply and Fixing in repairs 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed (upto 12 storey building)

Supply and Fixing in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section. complete all as specified and as directed.

Supply and Fixing in repair Extruded aluminium alloy handles, 150mm long fabricated type, anodised complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of pink primer including preparation of wooden surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel painting to steel surfaces (frame & shutter) over a coat of red oxide primer including preparation of steel surface of any description, not otherwise descri-bed, over 10cement mortar width or girth complete all as specified and as directed.

Material and labour for applying 2mm thick birla wall care putty or equivalent (each layer n.exc 1mm thick) on new plastered surfaces etc including necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

Material and labour for two coats acrylic distemper (white or coloured as per site reqmt) on new or previously untreated plastered surfaces including preparation of surface and incl necessary arrangement for working platform complete all as specified and as directed (upto 12 storey bldg).

Material and labour preparation of new or previously un treated surfaces of ceiling and applying two coats of white wash including necessary arrangement for working platform complete all as specified and as directed (upto 12 storey bldg).

Material and labour for two coats of cement base paint (white or coloured as per site reqmt) over newly plastered surface of wall including preparation of surface and including necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

Material and labour for one coat of white wash on old decorated surface of wall including preparation of surfaces and necessary arrangement for working platform complete all as specified and as directed (upto 12 storey building)

All as per item No 42 above but on ceiling complete all as specified and as directed

Material and labour for one coat of acrylic distemper on old decorated surface of internal walls including preparation of surfaces and necessary arrangement for working platform complete all as specified and as directed (upto 12 storey building)

Material and labour for one coat of synthetic enamelled paint on old decorated wooden surface exc 10cm width or girth including preparation and necessary arrangement for working platform complete all as specified and as directed (upto 12 storey building)

Material and labour for one coat of cement base paint (white or coloured as per site reqmt) on old decorated surface of external walls including preparation of surfaces to remove all foreign materials including necessary arrangement for working platform complete all as specified and as directed (upto 12 storey building). Note : No separate payment shall be made for colour of cement paint where required or directed by Engineer-in-Charge. Cost is included in unit rate.

Repairing and welding to steel door making functional (easy to opening and closing ) and replacing the missing damaged parts complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and Fixing framed work such as grills to windows/ventilators, gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of waste tanks and similar work conforming to FE Fe 290 Gde E-165 complete all as specified and as directed.

S&F in repairs for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and as directed.

S&F in repairs power coated aluminium door shutter including door frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 3.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed by the Engr-in-Charge.

S&F in repair power coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and as directed.

S&F in repairs for Powder coated aluminium windows/ventilator fixed type ,without sash bar weighing 0.55 kg/m including,necessary joining cleats, glazing clips, rubber packing,powder coated aluminium snap beading, screws and taking down old window/ventilator complete all as specified and as directed.

S&F 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane. complete all as specified and as directed.

M&L 9 mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

Material and Labour for 4mm thick non asbestus reinforcement gypsum (GRG) ceilling tiles of size 595 x 595 mm of approved design fixed with powder coating (powder coating on web bottom only) GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting ceiling tiles of 595 x595 mm with 4 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with grid size 60 x 120 cement mortar complete all as specified and as directed. (Make : Diamond Brand TM/ Dexune)

S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets at top and junctions required as per site etc complete all as specified and as directed.

S&F in repair only 6 mm thick Gypsum board/tiles of size 600x600 mm incl proper hanging arangement as required complete all as specified and directed by the Engr-in-charge.

S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg. complete all as specified and as directed.

S & F in repairs double action door spring hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. complete all as specified and as directed.

S&F in repair 5 mm thick beveled edge best quality looking mirror of size 600mm x 450mm fixed with screws complete all as specified and as directed.

Supply and Fixing 2nd class soft wood plain fillets,square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 13.00 sq cm and n.exc 25.00 sq cm. complete all as specified and as directed.

Supply and Fixing 2nd class soft wood plain fillets,square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 sqcm n.exc 6.00 sq cm. complete all as specified and as directed.

Supply and Fixing18/19 mm thick prelaminated particle board, exterior grade, fixed with screw to timber frame work but prelaminated both sides with decorative choice laminations. complete all as specified and as directed.

Supply and Fixing Hasp and stable 100 mm, aluminium anodised, wire type, stove enamelled black including bolt to hinge plate and fixed with screw etc. complete all as specified and as directed.

Supply and Fixing continuous (piano) hinges, mild steel, bright finish or electro galvanished width of flaps 40 mm (when open) in repair complete all as specified and as directed.

S&F in repair 40 mm knobs of brass, polished fixed with nut screw & washer bright finished complete all as specified and as directed.

S&F for ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and as directed.

Demolition of PCC in ground floor and paving n exc 15 cm (below or above ground level) including removal of debries to out side MD land complete all as specified and as directed

M&L for PCC type D-2 (1:4:8) using 40 mm graded stone agregate, 75 mm thick as in sub case for floors, complete all as specified and as directed

M&L 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm graded stone agregate, in sub case for floors, complete all as specified and as directed.

Dismentling of floors health or walls tiling and stone floor including cement mortar bedded & removing serviceable tiles to store and rubbies of the premises complete all as specified and as directed.

Material and Labour for Coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in cement mortar (1:4) complete all as specified and as directed.

Ditto all as per above item but on vertical surface such as skirting, dado, riser over a backing coat of 10 mm thick plaster in cement mortar (1:3). complete all as specified and as directed

M&L for coloured glazed ceramic tiles in vertical surfaces 350mmX250mmX7 mm /450mmX300mmX7 mm thickness as per manufacture on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm in cement mortar (1:3) backing of tiles including complete all as specified and as directed.

M&L for Light shade vitrified ceramic tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 15mm thick screed bed in cement mortar (1:6) etc complete all as specified and directed .

M&L for Light shade vitrified ceramic tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) for backing coat etc complete all as specified and directed .

M&L for plain cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) in copings,kneelers apex stones, bed plates, kerbs, water troughts and the like including weathening, slightly rounded or chamfered angles and throating as directed all as specified and directed.

Material and labour for pe-polished chequered/pavments tiles glossy finish of size n exc .16 sqm thickness 20 mm , 10 ton capacity as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match pigment to match shade of the tiles over and including 15mm thick screed bed of cement mortar (1:6) etc complete. complete all as specified and as directed.

Material and labour in repair for Granite slab (of any type) 16 to 18 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

M & L for drilling holes for bolts, pipes, etc. n. exc 25mm dia upto 10 cement mortar depth in granite or trape stone for gas connection pipe complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platfrom and other similar situations. complete all as specified and as directed.

Taking down eaves gutter, rain water pipes (any size and pattern) incl all fitting, bends, shoes,swan neck etc incl cleaning refixing and removing to store etc complete all as per specified and directed.

Supply and Fixing PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls with necessary clamps complete all as specified and as directed.

Supply and Fixing PVC (SWR) pipes of 75 mm dia, single socket fixed to walls with necessary clamps complete all as specified and as directed.

Supply and Fixing PVC (SWR) junction single tee equal or unequal 110 mm dia with access door complete all as specified and as directed.

Supply and Fixing PVC (SWR) junction single tee equal or unequal 75 mm dia With access door complete all as specified and as directed.

Supply and Fixing PVC (SWR) bends of 110 mm dia of any radius complete all as specified and as directed.

Supply and Fixing PVC (SWR) bends of 75mm dia, any radius complete all as specified and as directed.

Supply and Fixing PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal. complete all as specified and as directed.

Supply and Fixing PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal. complete all as specified and as directed.

Supply and Fixing in repair 100 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

Supply and Fixing in repair 75 mm bore iron soil waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

Supply and Fixing 100 mm bore CI bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and Fixing 75 mm bore CI bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and Fixing 100 mm bore CI branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed

Supply and Fixing 100 mm bore CI cast iron cowls. complete all as specified and as directed.

Supply and Fixing in repairs vitreous china bowl urinal flat back, size of 465mmX355mmX265 mm white (minium) with grating and union for discharge pipe (excluding flusing cistern, flush pipe and waste pipe) (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement fixing automatic flusing cistern with brackets, flush pipe grating and union for discharge pipe. complete all as specified and as directed.

Supply and Fixing in repairs CP Health faucet spray with 1.2m long pipe with wall hook complete all as specified and as directed.

Supply and Fixing in repairs 15 mm dia bib tap of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.

Supply and Fixing in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and as directed.

Supply and Fixing in repairs Bib taps, fancy type and chromoum plated, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15 mm bore and fixed complete all as specified and as directed.

Supply and Fixing in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and Fixing in repairs Stop valves 15mm dia , cast copper alloy, CP screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and Fixing in repair brass chromium plated shower roses 125 mm size with or without swivel joints,any size including fixing to steel pipe or union. complete all as specified and as directed.

Supply and Fixing in repairs 32 mm dia pvc waste pipe for kitchen sink,whb urinal etc. complete all as specified and as directed.

Supply and Fix in repairs PVC connections 15 mm size with PTMT with nuts of length 450mm complete all as specified and as directed.

Supply and Fixing towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and as directed.

Supply and Fixing High density polyethylene pipes (HDPE) 40 mm dia (bore) of pressure rating 6 kgf/cement mortar2 laid in trenches complete all as specified and as directed.

Supply and Fixing in repair Viterious china Wash Hand Basin size 580mm x 450 mm, white, including 15 mm dia pillar cock cast copper alloy CP, 15mm dia CP angular stop valve, 32 mm dia brass CP waste fitting & 15 mm PVC connection pipe 450 mm long complete all as specified and as directed.

Supply and Fixing in repairs 10 liters capacity PVC flushing cistern, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets with ISI marked body complete all as specified and as directed.

Supply and Fixing in repairs, vitreous china wash down water closet pan, (pedestal pattern) white, including 'P' or 'S' trap and with plastic water closet seat cover white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

Supply and Fixing in repairs vitreous china squatting pan , ‘Orissa’ pattern, size 580 mm x 440 mm including P or S trap, white with integral foot rests, embedded and set in making good to floor including removing rubbish complete all as specified and as directed.

Supply and Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and Fixing in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Supply and fixing kitchen plate rack made out of 1mm thick stainless steel of size 750mm x 600mmx 250mm complete all as specified and as directed.

Supply and Fixing in repair steel water tubing, med grade, galvanized with all new fittings and Fixing complete to walls & ceilings or laid on floors of bore of pipe 15 mm complete all as specified and as directed.

Taking down and refixing of old steel water tubing & connection with provn of new fittings in new or old position (wall, ceiling & floor, etc.) of bore of pipe 15 mm including cleaning complete all as specified and as directed.

Supply and Fixing in repair steel water tubing med grade galvanised with all new fittings and fixing complete to walls & ceilings or laid on floors of bore of pipe 20 mm complete all as specified and as directed.

Taking down and refixing of old steel water tubing & connection with provn of new fittings in new or old position (wall, ceiling & floor, etc.) of bore of pipe 20 mm including cleaning complete all as specified and as directed.

Supply and Fixing in repair steel water tubing med grade galvanised with all new fittings and fixing complete to walls & ceilings or laid on floors of bore of pipe 25 mm complete all as specified and as directed.

Taking down and refixing of old steel water tubing & connection with provn of new fittings in new or old position (wall, ceiling & floor, etc.) of bore of pipe 25 mm including cleaning complete all as specified and as directed.

Supply and Fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 15 mm bore pipe complete all as specified and as directed.

Supply and Fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore pipe complete all as specified and as directed.

Supply and Fixing in repairs 500 litres capacity rotational moulded multilayer polyethylene water storage tanks (cylindrical / vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore PVC ball valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and Fixing in repairs 1000 litres capacity rotational moulded multilayer polyethylene water storage tanks (cylindrical / vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore PVC ball valves, high pressure, with polythene float and fly- nut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and Fixing PVC water tank covers suitable for rotational moulded polyethylene water storage tank of 500/1000 ltrs capacity (Cylinderical vertical) including necessary fittings and fixing in repairs with any size and any description complete all as specified and as directed.

Dismantling bitumenous felt/old water proofing treatment of any type from roof or other surfaces and disposed of the same complete all as specified and as directed.

Material and Labour for providing, cement concrete type B0 (1:2:4) (using 12.5 mm grade stone aggregate) in leavel course 0f roof/ chajja kerbs, rammed or chamferded on edge 40 mm thick (average thickness) complete all as specified and as directed.

Material and Labour for 15 mm thick plaster on roof surfaces with cement mortar mixed with water proofing compound of approved quality as per manufacturer instruction (1:3) complete all as specified and as directed.(WPC will be measured and paid separately as supply only). complete all as specified and as directed.

Supply only integral Waterproofing compound of approved quality. complete all as specified and as directed.

Material and Labour for water proofing treatment with APP based polimeric membrane minimum weight 3 kg/sqm and 3 mm thick reinfored with polyster non wooven fabric laid on primed surfaces by torch application consists of the following complete all as specified and as directed :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 litre per sqm (ii) Laying of APP based membrane as specified thick ness and weight (iii) Applying one coat bitumen grade 85/25 @1.2 kg/sqm (iv) Applying two coat of aluminium paint @ 100 ml /sqm complete all as per specified and directed.

S&F in repair for 20/25mm high strength aluminium powder coated drapery rod fancy type including brackets and kobs etc complete all as specified and as directed (upto 12 storey building)

DK Contractor

M/S J S ENTERPRISES

M/S AVIJEET INTERNATIONAL

SOVA ENTERPRISE

PUTUL CONSTRUCTION CO.

TOTCO

MS HORIZEN