JJM 2020-2021- Uthamapalayam Block - Package No. JJM / UPM/84

Amount

1. To provide Functional Household Tap connection to Rural Households and extension of pipe line and providing new pipeline from salaimalai 100000 lit sump at Pallavarayanpatti panchayat

Construction of 1.00 Lakhs LTR Sump and delivery line in pallavarayanpatty panchayat

Earthwork excavation and depositing on bank with an initial lead of 10 m and lift of 2m in Hard stiff clay blcak cotton, hard red earth, shales, murram, ordinary gravel, stoney earth and earth mixed with small size boulders for foundation SS 20B as direct

First depth of 0 to 2 m

For SDR

For DMR not requiring blastering

Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm HBGS for leveling course including the cost of mixing concrete, ramming, curing etc. complete as directed by Departmental officers

RCC 1:1.5:3 using 20mm HBGS excluding cost of reinforcement, centering, shuttering strutting, but including cost of mixing concrete, placing, vibrating with mechanical vibrator, finishing, curing etc. complete as directed by Departmental officers

Beyond 1.50 m & upto 4.50 m below GL

Up to1.50 m below GL

Up to 4.50 m above GL

Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or suitable size of BG 10 stiffened with welded MS angles of size 25mm x 25mm x 3mm of boarding, laid over silver oak joints of size 10cm X 6.5cm spaced at 90cm centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre complying with standard specifications etc., completed and as directed by TWAD board officers

For 0.00 to 3.30 M (Plane Surface)

For 0.00 to 3.30 M (Curved Surface)

For 0.00 to 3.30 M (FOR ROUND COLUMN)

For 3.30 M- 4.3 M (Plane Surface)

For 3.30 M TO 4.30M (Curved Surface)

Supplying fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc. complete and as directed by Departmental officers.

Providing and fixing of cut stone (Roughdressed) set in CM 1:3 of size 0.45 X0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete and as directed etc., complete

Providing RCC Ventilator of 0.15 m dia using 20mm HBG stone including cost of all materials, centering, shuttering, stutting, reinforcement, placing of concrete, finishing, curing, and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed

Supply, delivery and fixing of CI manhole frame with cover of following size including cost of all materials , fixing of MS clamps, bolt, and nuts etc., complete and as directed

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Supplying and fixing in position of RCC in side access ladder of following size using 20mm size HBS jelly including cost of all materials, centering, shuttering, strutting, fabrication and placing in position of reinforcement,finishing, curing etc., complete and as directed

Provision for supply and fixing of MS Ladder including painting etc., complete

Supply and Delivery of 110 mm Dia HDPE pipes PE 80 PN 10 with ISI mark as per IS 4984/2016, including Hydralic test with hydralic equipment by filling with water and testing to the recommended pressure in convenient streches and with all tools & tackles etc., complete

Laying and jointing of 110 mm HDPE pipes PE 100 PN 10 in to trench with proper grade and alignment and alignment and required power supply for welding and with all tools & tackles etc., and as complete.

Supply and Delivery of 100 mm Dia G.I pipes and specials etc., complete

100 mm GI Pipes

100 mm G.I Coupling

100 mm G.I Bend

100 mm G.I Flange Shet

Labour Charge for refilling of pipe line trench with excavated Earth

Supplying and fixing of 50 mm Double Air valve / SCV and specials including earthwork excavation and for construction of 230mm brick work masonry chamber (valve pit Outer size 1.20mx1.20mx1.20m) with Precast cover slabs etc., complete.

Supply and Delivery and fixing of water meter and pipes along with specials and interlinkin of Pumps

Providing the water supply pipe Line,with GI, pvc pipe

Earth work excavation in all classes of soil for pipe line trench,

supply and delivery of 90mm PVC pipe

supply and delivery of 63mm PVC pipe

supply and delivery of 50mm GI pipe

supply and delivery of 65mm GI pipe

65mm Dia GI Coupling

65mm Dia GI Bend

65mm Dia GI Hex Nipple

65mm Dia GI GM Gatevalve

65 x 50mm GI Tee

90mm dia PVC Bend

90mm dia PVC FTA

90mm x63 mm dia PVC Tee

63mm dia PVC FTA

63mm dia PVC Bend

63mm PVC End cap

50mm Dia GM Gate valve

50mm Dia GI Hex Nipple

50mm dia GI couping

50mm Dia GI End cup

80mm Dia GI Hex Nipple

80mm Dia GM Gate valve

90 x 63mm Dia PVC Reducer

50mm GI Elbow

50mm Dia GI Tee

80 x 50mm Dia GI Tee

supply and delivery of 75mm PVC pipe

75mm PVC Bend

75 x 63mm PVC Tee

Lowering and jointing above 65mm GI Pipes

Lowering and jointing the 90mm pipe line

Lowering and jointing the 63mm pipe line

Lowering and jointing the 75mm pipe line

Lowering and jointing 50mm GI Pipes

Re-filling with excavated earth as per standard spesification

FHTC Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

Name Board

2. To provide Functional Household Tap connection to Rural Households , extension of pipe line and construction of 30000 lit OHT in kodangipatti at Pallavarayanpatti panchayat

providing main pumping pipe line from Ellapatty to Uthamapalayam limt Shri Soundarya Herbotech

Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2m in hard stiff clay ,stiff block cottom, hard red earth shales, muram gravel stoney earth and earth mixed with small size boulders S.S 20 B - First depth

2 nd depth

Filling with the river sand including cost and conveyence of all materials to site and all labourges etc complete.

Cement concrete 1 : 4 : 8 mix using 40 mm gauge hand broken granite stone jelly for foundation including watering where ever necessary and laid in layers not more than 15 cm thick compacting etc complete

Supplying and erecting centering for side and soffits including supports and strutting upto 3.29 m height for plane surfaces in all floors with all cross bracing use mild steels of size 90cm x 60cm and 10 gauge stiffned welded with mild steel angles etc

Plane surface

Below ground level

G.L to 3.30 m

CURVED SURFACE

above GL 0-3.30m

above GL3.31-4.30m

above GL 5.31-6.30

SQUARE COLUMN

Below Ground level

above GL 0-3.30m

Supplying Fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc, complete as per standard specification.

Reinforcement Cement concrete 1 : 1.5 : 3 mix using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabrication charges etc

A, 1.5m to 4.5 Below G.L footing for rectangular portion

B, 0m to 1.50 below G.L

C, 0m to 4.5m from G.L

D, 4.50m to 7.32 m from G.L

E, 7.33m to 10.98m form G.L

Painting in two coats over outer wall surface with approved quality of plastic Emulsion paint with colour over one coat of priming coat including cost of materials and labour charges etc.

Fabrication, supply delivery and fixing of out side MS ladder of 45 cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixing at 30cm center to center welded, jointed etc., providing with sutable side support, clamps and locking arrangements provided with one coat of red oxide paint for provided access to roof top 30,000 lit capacity OHT of sutable inclined lenght including bottom anchorage and transportation of all etc

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 mix using 20mm metal for OHT including cost of reinforcement placing grill in position centering shuttering charges mixing of concrete curing etc.

Providing PVC ventilating arrangements mosquito proof nylon net with 110mm PVC cowl and as directed by departmental officers

providing cut stone slab in CM 1;3 and as directed by the deptl.officers

Providing manhole cover of size 0.60 x 0.60m in RCC 1:1.5:3 with sutable reinforcement 50x50x6mm MS angle fixed along edges and as per departmental officers

Provision for pipe connection arrangemrnts for inlet outlet socur and overflow etc including cost and conveyance of all materials to site etc

65mm dia GI pipe for inlet connection b-clss medium

65mm dia for over flow & rain water harvesting pipe

65mm dia GI pipe for scour pipe-b-clss medium

65mm dia GI pipe for delivery pipe b-clss medium

65mm dia GI Tee

65mm dia GI Bend

65mm dia GM Gate valve

65mm dia GI threaded coupler

90mm dia PVC pipe (finolex 6 ksc)

90mm dia PVC Threaded coupler

Refilling the foundation with excavated earth including consolidation as per standard specification

Providing the water supply pipe Line,with GI, pvc pipe

supply and delivery of 50mm GI pipe

50mm dia GI couping

50mm Dia GI End cup

50mm Dia GI Tee

50 mm Dia GI bend

50mm Dia GM Gate valve

50mm Dia GI Hex Nipple

50mm Dia GI flange set

Lowering and jointing 50mm GI Pipes

FHTC Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

3. To provide Functional Household Tap connection to Rural Households,Providing new borewell with pumping main and extension of pipe line in Pottalpatti at Pallavarayanpatti panchayat

Earth work excavation in all classes of soil for pipe line trench,

supply and delivery of 90mm PVC pipe

supply and delivery of 50mm GI pipe

90mm dia PVC Bend

90mm x63 mm dia PVC Tee

90mm dia PVC FTA

80mm Dia GI Hex Nipple

80mm Dia GM Gate valve

63mm dia PVC FTA

50mm Dia GI Hex Nipple

50mm dia GI couping

50mm Dia GI End cup

50mm Dia GI Tee

Lowering and jointing the 90mm pipe line

Lowering and jointing the 50 mm G.I pipe line

Re-filling with excavated earth as per standard spesification

FHTC Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

4. To provide Functional Household Tap connection to Rural Households, construction of infiltration wel with motor and pipeline and 100000 lit sump at T Sindalacheri panchayat

Supply and Delivery Of 20H.P Open Well Pump SET 1000 lpm X 80M Head with ISI mark (OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220/2002 WITHOUT PANEL BOARD)

Supply and Delivery Of 20 H.P Pannel Board With Auto Preventor including Auto Mobile ON-OFF System control

Supply and Cost Of 10 sq.mm PVC insulated and sheated 3 core flat type copper cable with ISI mark

Supply and Cost Of 150 mm G.I pipe ( Heavy ) " C " class Pipe with Standard Specification, including Hydralic test with hydralic equipment by filling with water and testing to the recommended pressure in convenient streches and with all tools & tackles etc., complete

Supply and Delivery of 160 mm Dia HDPE pipes PE 80 PN 10 with ISI mark as per IS 4984/2016, including Hydralic test with hydralic equipment by filling with water and testing to the recommended pressure in convenient streches and with all tools & tackles etc., complete

Supplying and fixing of 80 mm G.M Non Return Valve

Supplying and fixing of 125 mm G.M Gate Valves

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed for pipe line Trench work

Laying and jointing of 160 mm HDPE pipes PE 80 PN 6 in to trench with proper grade and alignment and required power supply for welding and with all tools & tackles etc., and as complete.

Labour Charge for refilling of pipe line trench with excavated Earth

Labour charges for erection and commissioning of 20 HP openwell pumpset and pipes into the well

Supplying and fixing of 50 mm Double Air valve and specials including earthwork excavation and for construction of 230mm brick work masonry chamber (valve pit Outer size 1.20mx1.20mx1.20m) with Precast cover slabs etc., complete.

Double Air valveas per IS 14845/2000 With chamber arrangements

Provision for Angaring Arrengements

Supply and Delivery of HDPE pipes and GI pipes along with specials and interlinkin of Pumps

Supply and Delivery charges of EB Electrical Materials

Provision for EB Deposit

Cost of Solvent cement

CONSTRUCTION OF 100000 LITRES CAPACITY OHT ( 7.5 M STAGING ) at T.Sinthalaichery

Earthwork excavation and depositing on bank with an initial lead of 10 m and lift of 2m in Hard stiff clay blcak cotton, hard red earth, shales, murram, ordinary gravel, stoney earth and earth mixed with small size boulders for foundation SS 20B as direct

First depth of 0 to 2 m

For SDR

For DMR not requiring blastering

Cement concrete 1:4:8 (One cement four sand and eight aggregates) using 40mm HBGS for leveling course including the cost of mixing concrete, ramming, curing etc. complete as directed by Departmental officers

RCC 1:1.5:3 using 20mm HBGS excluding cost of reinforcement, centering, shuttering strutting, but including cost of mixing concrete, placing, vibrating with mechanical vibrator, finishing, curing etc. complete as directed by Departmental officers

Beyond 1.50 m & upto 4.50 m below GL

Up to1.50 m below GL

Up to 4.50 m above GL

Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or suitable size of BG 10 stiffened with welded MS angles of size 25mm x 25mm x 3mm of boarding, laid over silver oak joints of size 10cm X 6.5cm spaced at 90cm centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre complying with standard specifications etc., completed and as directed by TWAD board officers

For 0.00 to 3.30 M (Plane Surface)

For 0.00 to 3.30 M (Curved Surface)

For 0.00 to 3.30 M (FOR ROUND COLUMN)

For 3.30 M- 4.3 M (Plane Surface)

For 3.30 M TO 4.30M (Curved Surface)

Supplying fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc. complete and as directed by Departmental officers.

Providing and fixing of cut stone (Roughdressed) set in CM 1:3 of size 0.45 X0.45 X 0.15M at site including cost of all materials, labour charges, curing etc., complete and as directed etc., complete

Providing RCC Ventilator of 0.15 m dia using 20mm HBG stone including cost of all materials, centering, shuttering, stutting, reinforcement, placing of concrete, finishing, curing, and fixing in position on the roof slab with mosquito proof net arrangement and etc., complete and as directed

Supply, delivery and fixing of CI manhole frame with cover of following size including cost of all materials , fixing of MS clamps, bolt, and nuts etc., complete and as directed

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .

Supplying and fixing in position of RCC in side access ladder of following size using 20mm size HBS jelly including cost of all materials, centering, shuttering, strutting, fabrication and placing in position of reinforcement,finishing, curing etc., complete and as directed

Provision for supply and fixing of MS Ladder including painting etc., complete

Supply and Delivery Of Open Well Pump SET 900 lpm X 40 M Head with ISI mark (OPENWELL SUBMERSIBLE PUMPSET AS PER IS 14220/2002 WITHOUT PANEL BOARD)

Supply and Delivery Of 20 H.P Pannel Board With Auto Preventor including Auto Mobile ON-OFF System control

Supply and Cost Of 10 sq.mm PVC insulated and sheated 3 core flat type copper cable with ISI mark

Supply and Cost Of 150 mm G.I pipe ( Heavy ) " C " class Pipe with Standard Specification, including Hydralic test with hydralic equipment by filling with water and testing to the recommended pressure in convenient streches and with all tools & tackles etc., complete

Supply and Delivery of 160 mm Dia HDPE pipes PE 80 PN 10 with ISI mark as per IS 4984/2016, including Hydralic test with hydralic equipment by filling with water and testing to the recommended pressure in convenient streches and with all tools & tackles etc., complete

Supply and Delivery of 110 mm Dia HDPE pipes PE 80 PN 10 with ISI mark as per IS 4984/2016, including Hydralic test with hydralic equipment by filling with water and testing to the recommended pressure in convenient streches and with all tools & tackles etc., complete

Earth work excavation for in all clauses of soils and sub soils to full depth as may be directed for pipe line Trench work

Laying and jointing of 160 mm HDPE pipes PE 80 PN 10 in to trench with proper grade and alignment and required power supply for welding and with all tools & tackles etc., and as complete.

Labour Charge for refilling of pipe line trench with excavated Earth

Labour charges for erection and commissioning of 20 HP openwell pumpset and pipes into the well

Supplying and fixing of 50 mm Double Air valve and specials including earthwork excavation and for construction of 230mm brick work masonry chamber (valve pit Outer size 1.20mx1.20mx1.20m) with Precast cover slabs etc., complete.

Supplying and fixing of 80 mm G.M Non Return Valve

Supplying and fixing of 125 mm G.M Gate Valves

Construction of Pumproom in infilteration well and 1.00 Lakhs LTR Sump

Earth work excavation and for foundation in all soils and sub-soils to full depth as may be directed wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15 cm Thick etc complete

Filling with the river sand including cost and conveyence of all materials to site and all labour charges etc complete.

Cement concrete 1 : 4 : 8 using 40 mm gauge hand broken granite stone jelly for foundation including watering where ever necessary and laid in layers not more than 15 cm thick compacting etc complete

Random Rubble Masonry in cement mortor 1 : 5 (one cement and five sand) using Rough stone and Bond stone including cost and conveyence of all materials to site and all labourges etc complete.

Brick work in cement mortal 1 : 5 (one cement and five sand) using country bricks including cost of cement which will be supplied by the department if available and the cost will be recovered as per the rate in the condition including curing etc., complete

Supplying and erecting centering for side and soffits including supports and strutting upto 3.29 m height for plane surfaces in all floors with all cross bracing use mild steels of size 90cm x 60cm and 10 gauge stiffned welded with mild steel angles etc

Supplying fabricating and placing in petition mild steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with standard specification (MS rod and RTS rod ) etc.,

Reinforcement Cement concrete 1 :1.5 : 3 using 20mm gauge machine broken hard granite stone jelly for all RCC items of works excluding cost of reinforcement and fabrication charges etc

Plastering with cement mortar 1 : 3 mix 10 mm thick over the cement concrete for floor finish including curing etc complete complying with standard specification and as directed

Plastering with cement mortar 1 : 5 (one cement and four sand) 12 mm thick over the cement concrete for floor finish including curing etc complete complying with standard specification and as directed

Supplying and delivery of Steel door including cost and conveyance of all materials to site etc

Fixing of Steel door including cost and conveyance of all materials to site etc

Painting in two coats over outer wall surface with approved quality of Plastic emulsion paint with colour over one coat of priming coat including cost of materials and labour charges etc.

Name Board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

JEGADEESWARI CONSTRUCTIONS