SPECIAL REPAIRS REPLACEMENT DIESEL DRIVEN FIRE FIGHTENING PUMPS AND CONNECTED ITEMS AT AMN DUMP UNDER GE I GOS

Supply,install,design,errection, commissioning and testing of diesel engine driven pump set horizental centrifugal end suction type,back pull-out design desiel engine drive centrifugal pump set model No.-3R1040,50HP,2150 RPM, Vehicle mounted on a common galvanized iron heavy duty base plate 10 mm thikness with coupling guard suitable for discharged of 97 m3/hr, at the head of 70 mtrs alogwith fuel tank, battery & battery leads, engine will be radiator cooled type.Material construction of pump casing: CI,impeller: Bronze,shaft;40C8;Shaft sleeves;ss 410H. Scope of supply :-Diesel engine & suitable centrifugal pump set complete, engine base plate,coupling,couplig guard,fuel tank,12V battery & battery leads,water pressure guage, brass nozzle,suitable hose reel 30 mtr with drum, flexible/PPR suction pipe as required at site/pump, and foot valve as per site requirement and incl providing any other functional requirements such as nuts,bolts and washers etc. And including providing with Two wheeler trolley complete, trolley should be having a two suitable load bearing tyers,galvaised steel structural body 10 mm thick & vehicle movement and carrying & stading fesilities for suitable toying / carrying system arragements with suitable capacity/ design as per OEM for diesel engine, and in additional Tools box with necessary tools,battery with battery house with locking arrangements,coupling,fuel tank etc.complete all as specified and directed.Make :- Kirloskardiesel engine driven pump set horizental centrifugal end suction type,back pull-out design desiel engine drive centrifugal pump set model No.-3R1040,50HP,2150 RPM or equivalent any approved make by GE.Note:-1 Trolley design, load bearing capacity,tyers size,toe bar suitable type & carrying fesilities,maualy braking system,body materials of trolley & trolley SLD should be submitted and approved by Engr-in-Charge/ GE before procurment.2 Testing of .diesel engine driven pump set horizental centrifugal end suction type such as priming,initial free running, load running, presure test at site as per OEM manual in the presence of Engr -in-Charge.3.The diesel for 2 hours load testing and necessary testing equipments/accessories shall be provided by the contractor and cost deemed to be included in quoted rate and any other items required for final testing shall also be provided by the contractor without any extra cost to the department.

M& L for GI pipe 100 mm dia for diesel engine driven pump set horizental centrifugal pump set shed pillars including providing necessary welding,uts,bolts and washers etc complete all as specified ad directed.

M& L for GI pipe 65 mm dia for diesel engine driven pump set horizental centrifugal pump set shed load branches including providing necessary welding,uts,bolts and washers etc complete all as specified ad directed.complete all as specified ad directed.

Material and labour for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) for making good of road cutting portion, mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for PCC 1:3:6 type C2 using (40 mm graded stone aggregate) for making good of road cutting portion mass concrete, filling of foundations etc including necessary use and waste of form work complete all as specified and directed

Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making foundation/base plinth and pole coping, foundation etc including necessary use and waste of form work complete all as specified and directed.

Supply and providing river sand for cushioning with dry clean sand 15 cm below cable and 8 cm above the under ground cables and necessary fillings in the trenches and punning to provide required cover complete all as specified and directed.

Excavation in trenches soft loose soil exceeding 1.5 mtr depth and not exc 3.0 mtr depth and not exceeding 1.5 mtr wide for foundations etc and getting out in soft loose soil complete all as specified and directed.

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft /loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M&L for galvanised iron metal structure shed for diesel engine driven pump set horizental centrifuga and including providing necessary fabrication work,welding, & drilling work,bending,cutting,nuts,bolts and washers etc for transformer fencing and gate with locking arrangements with 12mm square/round galvanised iron steel FI and, galavanised angles & GI channels of length as required length and heigh incl errection of channels 0.5mtr below ground level and 1.5 mtr above ground level with proper foundation and coping two coats of red oxide primer and two coats of anti-corrosive silver paint complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and laying suction ring heavt duty one side flange/MS clamps and anether side foot valve connected in static tank ( polypropylene random co-polymer) concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all plain & brass thread polypropylene random fittings laid in trenches complete allas specified and directed.

Supply and fixing foot valve 150 mm dia suitable ring pipes and including providing necessary fixing accessories such as clamps,flanges nuts,bolts and washers etc any alterations,ecessary welding works for functional requirements as per site requirements complete allas specified and directed.

Supply and fixing fire hydrant landing valve type -A( Single head outlet) of 63 mm dia confirming to IS-5290 including necessary properly fixing and functioning arrangements,necessary welding works,cutting works as per site requirement complete all as specified and directed by Engineer- in-Charge

Supply and fixing fire hydrant landing valve type -B( double head outlet) of 63 mm dia confirming to IS-5290 including necessary properly fixing and functioning arrangements,necessary welding works,cutting works as per site requirement complete all as specified and directed by Engineer- in-Charge

Supply and fixing hose reel of 63 mm dia and 30 metre length confirming to IS-5132 with male & female brass couplings including necessary properly fixing and functioning arrangements,necessary welding works,cutting works as per site requirement complete all as specified and directed by Engineer- in-Charge

Supply and fixing 63 mm dia 15 metre long hose confirming to IS-636 complete with male anf female brass coupling confirming to IS-903 including necessary properly fixing and functioning arrangements complete all as specified and directed by Engineer- in-Charge

M& L for GI pipe H- class 65 mm dia for diesel engine driven pump set horizental centrifugal pump set water distribution lines including providing necessary fittings such as tee,bents,elbow, short pieces, long bends etc and necessary welding works ,nuts,bolts and washers etc complete all as specified ad directed. complete all as specified ad directed.Make - Tata/Jindal/Bambay steel tubes or as approved make

M& L for GI pipe H- class 80 mm dia for diesel engine driven pump set horizental centrifugal pump set water distribution lines including providing necessary fittings such as tee,bents,elbow, short pieces, long bends etc and necessary welding works ,nuts,bolts and washers etc complete all as specified ad directed. complete all as specified ad directed.

supply and fixig butterfly valve 65 mm dia incl providig necessary nuts,bolt,rubber washers and washers etc complete all as specified and directed.

supply and fixig butterfly valve 80 mm dia incl providig necessary nuts,bolt,rubber washers and washers etc complete all as specified and directed.

M&L for hose box made of 16 gauge MS sheet 800 mm x 600 mm x 250 mm with double door with 4 mm thick glasses ad door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard.and including providing necessary fixing arrangements and welding drill,cuttig works as per site requirement complete all as specified and directed.