REPAIRS TO PLINTH PROTECTION CHAJJAS FLOORING AND CLEANING OF WATER TANK AT 26ED GV CAMP IAM VV CAMP AND REPAIRS TO COMPOUND WALL BARBED WIRE CHAIN LINK FENCING AND SECURITY GATE AT 26ED AND GAGAN VIHAR CAMP UNDER GE AF MARATHAHALLI

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thickness (below or above ground) complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone wall etc. includIng racking out joints, hacking for key, scrubbing down with water etc., all as specified and directed. ( Height more than 7.5m ) complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Roughening surfaces of old concrete/brick floor by picking, sweeping clean and washing down with water to remove dust, etc. & brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 (40 mm graded aggregate) in sub base of floor & paving complete all as specified and as directed.

M&L Cement concrete 100mm thick type B-2, 1:2:4 in floor (40mm graded aggregate) finished cement concrete surface even and smooth without using extra cement and making impressions of expanded metal, whilet the concrete is green complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate in floor complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc.10cm in width and setting in mortar complete in CM 1:6 complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of concrete surface in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed.

M&L two coat of cement based paint on undecorated wall surfaces including preparation of new plastered surfaces complete all as specified and as directed.

Cleaning & removing all scale & dirt, etc., from tanks of capacity exc 250 lit and not exc 500 lit & from mouths of circulating pipes, etc. complete all as specified and as directed.

Cleaning & removing all scale & dirt, etc., from tanks of capacity exc 500 lit and not exc 1000 lit & from mouths of circulating pipes, etc. complete all as specified and as directed.

S&F in repairs PVC cover suitable for existing rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) complete all as specified and as directed.

S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball complete all as specified and as directed.

M&L Gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 20mm bore in repairs complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate plinth protection finishing surface even and fair complete all as specified and as directed.

M&L for forming construction joint 30mm deep X 10 mm wide filled with sealing compound Grade 'A' complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thk cement screed base laid in mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thk cement screed base laid in mortar 1:4 in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto complete all as specified and as directed.

M & L Machine cut cudappah stone slab 20-25mm thick over 15mm thk cement screed base laid in mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for Non - skid colored Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry 15mm thk cement screed base laid in mortar 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for Non - skid colored Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces such as skirtings, dados and risers to steps etc. etc. set and jointed in neat cement slurry 15mm thk cement screed base laid in mortar 1:4 and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for 20mm thk Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and 15mm thk cement screed base laid in mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling of barbed wire fencing, any type etc. complete all as specified and as directed.

Dismantling of wrought iron or miled steel work of any description not other wise provided all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

All per item No.28 above, but, for each additional or part thereof in depth beyond the first 1.50M complete all as specified and as directed.

M&L for cement concrete type D-2 1:4:8 (40 mm graded) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for RCC M-25 Nominal mix concrete Type B1 1:2:4 (20mm graded aggregate), using 20mm graded aggregate for foundation incl raft footing and bases of column etc. complete all as specified and directed

M&L RCC M-25 Nominal mix concrete Type B1 1:2:4 (20mm graded aggregate), using 20mm graded aggregate in columns, pillars, piers, posts and struts all as specified and directed

M&L for RCC M-25 Nominal mix Type B1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers; lintels over 1.5m span etc. complete all as specified and directed

M&L for formwork to sides of cocrete foundation,footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams & similar work vertical better rough finished surfaces of concrete all as specified and directed

M&L for form work to sides and soffits of floor or roof beams, lintels etc, flat, rough finished surface of concrete all as specified and directed

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete as specified.

All as per item No. 36 above, but , 5mm dia and over, upto and including 10 mm dia in stirrups all as specified and directed..

M&L Cement concrete cast-in situ 1:2:4 Type B1 (20 mm graded aggragate) in bands, coping and the like incl weathering throating complete all as specified and as directed.

M&L for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel or iron surface of any description over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surface all as specified and directed.

All as per item No. 41 above, but , one coat on old steel surfaces complete all as specified and as directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted masonary bangalore type brought up to courses built in CM 1:6 complete all as specified and as directed.

All as per item No. 43 above, but, except stones complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed upto courses hammer dressing with maximum deprssion on face from straight edge held against the dressed surface n exc 40 mm all as specified and directed.

Supplied only liquid water proofing compound all as specified and directed.

M&L for Preperation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

All as per item No.47 above , but , one coat on old surfaces complete all as specified and as directed.

M & L preparation of new surfaces with Priming paints plaster coat and applying one coat of Synthetic enamal paint on walls complete all as specified and as directed .

Returning, filling soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.

Removing excavated soil n.exc 5.0 km and depositing where directed at a level n.exc 1.50 M above the starting points all as specified and directed.

Dismanting structual steel work including doors, gates but excluding framed truss etc. all as specified and directed.

M&L framed work for hang gates with ends of bar shoulder and/or riveted, or forged into spikes; framed guard bars including pintle hinges, stops hand made sliding bolts etc. & similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S&F for 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched; including rounded headed screws, clout nails or revets & fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S& F zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 kg per coil complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, welding work required etc. including provision of winding wire complete all as specified and as directed.

PRAGATHI BUILDERS

M/s STAR ELECTRICALS

m/s raghavendra kulkarni

P Ramesh and Co