GE(S) BTD TOKEN NO 58 OF 2022-23 REPAIR TO ROOFING JOINERY PLUMBING FLOORING PLUMBING WORKS TO BLDG NO P 510 P 524 P 485 P 514 P 1180 AND CERTAIN OTHER BLDGS OTM ACCN OF 36 FAD IN SECTOR IV UNDER AGE BR II GE (S) BATHINDA AT BATHINDA MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and as directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with complete all as specified and directed.

S&F150mm aluminium handles, oval type, stove enemeled black complete all as specified and as directed.

S&F 300mm long aluminium sliding doors bolts, plate type, stove enameled black bolts and nuts, four on bolt plate and two on staple complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter as in bathroom, toilet, cupboard and kitchen cabinate,(With particle board) 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) bathroom, toilet, cupboard and kitchen cabinate complete all as specified and directed .

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.

Supply and fixing 100mm long extruded aluminium anodised butt hinges with galvanised mild steel screws complete all as specified and as directed.

S&F 150mm bore aluminium anodised barrel tower bolts of extruded section, (ISI marked) complete all as specified and as directed.

S&F 125 mm long, aluminium anodised handles, cast type, (ISI marked) complete all as specified and as directed.

S & F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

All as per Srl item No 16 above but ventilators top hung complete all as specified and as directed.

S & F Powder coated Anodised aluminium window and ventilator shutters,glazed/guazed side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S & F 4.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F anodized aluminium window/ventilators shutters/Partition (thickness of powder coating not less than 50 micron) fixed type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc. complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks (old serviceable bricks to be used) complete all as specified and as directed. Note : The rate includes for cleaning of old bricks.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only of Liquid water proofing compound of approved make complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions complete all as specified and as directed.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Demolition of cement concrete (re-inforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed .

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and Chajjas in double story bldg including scafolding for repair etc and the like, including form work complete all as specified and as directed .

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including backing coat of 10 mm in cement mortar 1:4 complete all as specified and as directed.

Material and labour Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, size of tile 600x 600x10mm thick,on 15mm thick screed bed in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Description all as per Ser item No 41 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as directed.

M & L for Non skid floor tiles, colored, of size 400x400x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cm 1:6 complete all as specified and as directed.

M & L for Glazed ceramic colored tiles of size 300x450x6mm thick or of size approved in dado, set and jointed in neat cement on and including the provision of 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F 15 mm bore Chromium plated Bib taps (Fancy type) cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe complete all as specified and as directed.

S&F in repair 15 mm bore stop valve for cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fixing in replacement 15 mm bore stop valve (or angle valve) fancy ,(concealed type) chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover closed pattern including bolts, flush pipe of polyethylene of low or high density PVC 32mm dia anti-syphonage pipe etc and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

Supply and fixing in repair 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified and as directed.

Supply and fixing in repair Toilet paper holder of of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed

S&F Vitreous China Urinal in repair bowl type, white of size 465 mm x 355 mm x 265 mm (excluding flushing cistern, flush pipe but including waste pipe , grating and union for discharge pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws or brackets, pointing around urinal back in cement etc. complete all as specified and as directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and as directed.

S & F Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and as directed.

S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.

Supplied only waste coupling 32 mm dia PTMT complete all as specified and as directed.

Supply and fixing in replacement 125mm size brass chromioum plated shower rose with angular arm with swivel jiont complete all as specified and directed.

Supply and fixing in replacement PVC connection 15mm dia and 60cm long with two Nos of brass check nuts and washers complete all as specified and directed.

S & F in 'repair' CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and as directed.

S&F Soap dish of size 100mm x 100mm x 0.6mm thick fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and as directed.

S & F 100mm bore cast iron soil waste and vent (Spun pipe) pipe with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F 100mm bore cast iron soil waste and vent (Spun pipe) pipes with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F cast iron Bends (100mm bore radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F cast iron Branch pieces,100mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F 75mm bore cast iron soil waste and vent spun pipe with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F 75mm bore Cast iron soil, waste and vent spun pipes with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F cast iron Bends (75mm bore radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F cast iron Branch pieces,75mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S & F cast iron sand cast soil waste and vent pipe 50mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F Cast iron cowls 100mm bore complete all as specified and directed.

S&F 25mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for 100mm bore Cast iron floor trap/Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L for 75mm bore Cast iron floor trap/Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S & F Salt-glazed stoneware gully traps,(Size of gully traps in 150mm x 150 mm) square or round mouthed, tvpe 'P' complete all as specified and as directed.

M&L for providing Plain cement concrete bed for 150 mm bore drain pipes in 1:4:8 type D 2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes of after they are laid and tested complete all as specified and as directed.

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed (Internal diameter of pipe 150 mm) as specified complete with collars complete all as specified and as directed.

Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed .

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

M & L for Providing precast cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc. complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out loose and soft soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Refixing old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and as directed.

Taking down or up 20 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed .

Refixing old GI tubing 20 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and as directed.

Taking down or up 25 or 32mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Refixing old GI tubing 25 or 32mmmm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed .

Dismantling water tanks and removing to store 1000 ltr complete all as specified and as directed.

S&F Rotational moulded polyethylene 1000 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Dismantling water tanks and removing to store 500 ltr complete all as specified and as directed.

S&F Rotational moulded polyethylene 500 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fixing 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size (weight 210 gms Minimum) complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.

S&F tee Grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting consisting angle cleats of size 25mm wide 1.6m thick with flag fixed to RCC ceiling with door fasterner or wrapping the suspending wire around the existing wooden/steel/purlin/rafter for suspending grid frame work of size 605mm x 605mm c/c on main Tee and fixed to T-grid as per manufacturer's instructions. The section of main Tee 37mm x 24mm x 0.60mm and perimeter angle 24mm x 24mm x 0.50mm thick shall be fixed to wall with GI screws 40mm long and 450mm c/c along the perimeter of wall all as per manufacturer's instructions.

M&L 12mm thick perforted particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, fixed in existing ceiling flat or sloping complete all as specified and directed

S&F solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including PVC beading on edges & top etc as per specifications complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and as directed.

S&F 5mm thick PVC sheet in strips and channel feathered at the edges for fixing on wall panelling inclusive of solvent cement fixing at site complete all as specified and as directed.

Dismantling old asbestos cement, corrugated or semi-corrugated sheets in roof covering complete all as specified and as directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Rolled mild steel as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings & heavy bracket frame (beam, tee, angle channel or flat section) in distance pieces, cleats etc confirming to Fe-410-W(grade-250, quality"A') including one shop coat of zinc chromate primer paint before fixing in position complete all as specified and as directed.

Complete removing of old roof treatment from brick/concrete surfaces including removal of grass roots, hedges/plant roots complete all as specified and directed.

M & L for greasing and oiling for rolling shutter of any type and size to free moving / opening complete all as specified and directed.

M&L for 20mm dia fancy type PVC coated MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and as directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Cutting groves in brick wall 75 mm wide and 65mm deep and shaping horizontal face of groove and filled (after inserting of felt) in cement mortar 1:3 etc complete all as specified and as directed.

M&L screed bed or bedding layer of mortar 1:4 of 15mm thick as on roof surfaces parapet or vertical beam surface (horizental or vertical) of finish even and smooth witout using extra cement complete all as specified and as directed. Note using only course sand (Toka sand) in screed bed/plastering.

M&L cement concrete in roof Kerb type B-1 1:2:4 ( 20 mm graded agregate) and rounded champered and finishing even and smooth complete all as specified and directed.

M & L applying roof treament over finished and dried surfaces of RCC slab of cold bituminous primer @ 0.30 litre/sqm and laid APP modified water proofing memberane with non polyester reinforcement of any make 3 mm thick and minium weight @ 3.5 Kg/Sqm laid with gas torch and pasted on roof surfaces with roller and apply coat of bitumen aluminium paint @ 0.10 litre/Sqm on top of treated surfaces of roof (application including sides lap, over laps shall be provided not less than 10 cm and jointed seal with torch as per manufacturer's instructions specification and as per particular specfication or complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Surface excavation n.exc 30cm depth & average 15 cm deep & getting cut in loose/soft soil complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed.

M&L 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L Precast cement concrete type B-1 (1:2:4) as in kerb stone set in CM 1:4 incl necessary moulds / forms work etc complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Dismantling / taking down 15 mm dia bib cock/ stop cock/angle cock of any pattern or of any type and re-fixing the same after minor repairs such as replacement of washers etc or re-fixing old serviceable bib cocks/ stop cocks any pattern complete all as specified and directed (any major parts such as jumpers brass/ spindles/ caps etc to be measured as supply only and paid for accordingly).

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.

S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

S&F in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.

S & F in repairs Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.

S&F in repairs tank nipple of suitable size at required on ground complete all as specified and directed.

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.

S & F in repairs 32/40mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.

S & F in repair PVC connection 15 mm size with brass nuts of length 600 mm of approved quality complete all as specified and directed.

S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed.

S&F in repair flush pipe of polyethene of low or high density or PVC, 32mm dia, for low level cistern and fixed complete all as specified and directed.

S & F in repairs CP grating (with or without waste hole), 125/150 mm size, fixed on floor/nahani traps etc complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed.

S & F in repair floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repairs mild steel peg stay suitable for steel windows/ ventilators complete all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for applying two coats of Dr Fixit pidecrete URP in sunken floor portion of toilets & bathroom, chajja, staircase. etc by using URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush. Etc complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed.

Note:- All debris obtained from dismintling, demolition and taking down (Exept credited to contractor) shall be desposed off out side MOD land and charges, if any, as incurred in civil area as per their regulator shall be deemed to be including in quoted rates. No extra claim on this account shall be admissble.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/S BHAGWATI CONSTRUCTION COMPANY

SHARDA ENTERPRIES