Maintenance of IQ at Wireless Colony Guru Gram (SH Finishing work, replacement of sanitary fittings,modification in existing sewerage disposal system , procurement of door matt , replacement of old pelmet rod and other mis civil works).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge .(a) With cement mortar 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.(a) One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade .(a) Two or more coats on new work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

(a) New work (two or more coats) over and including water thinnable priming coat with cement primer

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage.

(a) For vertical surface two coats @0.70 kg per sqm per coat

(b) For horizontal surface one coat @1.10 kg per sqm.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete.(a) 2nd class teak wood 50X12 mm

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing Stainless Steel curtain rod Min 25 mm dia (heavy type) of approved quality and manufacturer with necessary end brackets required according to loaction and length and weight of curtains completely fixing to walls with necessary hanging brackets complete as per direction of Engineer in Charge. (a) 25 mm dia

Taking out existing pelmet rod along with curtains without damaging the surroundings and handing over the curtains to service staff complete as per direction of Engineer in Charge

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing Central Hole Basin Mixer of approved quality and manufacturere (Jaquar CON-167KNB or equivalent )without Popup Waste System with 450mm Long Braided Hoses complete as direction of Engineer in Charge

Providing and fixing Chrome plated brass Wall Mixer of approved quality and manufacturere (Jaquar CON-219KN) or equivalent ) with connecting Legs and wall flanges complete as direction of Engineer in Charge..(a) 15 mm nominal bore

Providing and fixing Chrome plated brass Swan Neck Tap with Left /right Hand of approved quality and manufacturere (Jaquar CON-123BKN or equivalent ) with operating knob with 450 mm long braided hose complete as direction of Engineer in Charge. .(a) 15 mm nominal bore

Providing and fixing Chrome plated brass Angular stopcock with wall flange of approved quality and manufacturere (Jaquar CON-059KN or equivalent ) w complete as direction of Engineer in Charge. .(a) 15 mm nominal bore

Providing and fixing Chrome plated brass Long body with wall flange of approved quality and manufacturere (Jaquar CON-107KN or equivalent ) w complete as direction of Engineer in Charge.(a) .(a) 15 mm nominal bore

Providing and fixing Chrome plated brass bibcok with wall flange of approved quality and manufacturere (Jaquar CON-047KN or equivalent ) w complete as direction of Engineer in Charge.(a) .(a) 15 mm nominal bore

Providing and fixing Stainless Steel Single towel Rail 600 mm long of approved quality and manufacturere (Jaquar ACN 1111BM or equivalent ) with necessary rawl plugs and screws complete as direction of Engineer in Charge

Providing and fixing Stainless Steel Towel Ring of approved quality and manufacturere (Jaquar ACN 1121BM or equivalent ) with necessary rawl plugs and screws complete as direction of Engineer in Charge.

Providing and fixing Soap Dispenser with Glass Bottle of approved quality and manufacturere (Jaquar ACN1135 N or equivalent) with necessary rawl plugs complete as per direction of Engineer in Charge

Providing and fixing Toilet Roll holder with Stainless Steel flap of approved quality and manufacturere (Jaquar ACN1153S or equivalent) with necessary rawl plugs complete as per direction of Engineer in Charge

Providing and fixing Toilet Hand Shower (Health Faucet ) with 8 mm dia 1.20 meter long flexible tube and wall hook of approved quality and manufacturere (Jaquar ALD 573 or equivalent) with necessary rawl plugs complete as per direction of Engineer in Charge

Providing and fixing Chrome plated brass waste coupling 32 mm size full thread with 130 mm height of approved quality and manufacturere (Jaquar ALD 705L130 or equivalent) with necessary rawl plugs complete as per direction of Engineer in Charge

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

(a) 1.0 mm thick

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately

(a) 12mm thick commercial ply conforming to IS : 1328 BWR type

Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish.

(a) Plain Gypsum plaster board conforming to IS: 2095 (Part -1) : 2011 (Board with BIS certification marks 12.5 mm thick

Taking out weed and/or peepal tree (girth upto 150 mm) and like alongwith its root intrudeing into brick masonry in cement moratr and/or cement concrete or R.C.C. on exterior wall face (accessible from top of roof) upto floor five level which consists of: (i) Providing herbicide chemical Glyphosate or equivalent in required doses on & around the weed/tree, (ii) Dismantling upto 340 mm brick masonry having elevation area upto 0.75 Sqm around and near intruded portion of tree etc., (iii) Dismantling C.C. or R.C.C. around and near intrudes portion of tree etc. wherever required, (iv) Making good the dismantled portion of brick masonary by brick work (using old bricks after removing mortar etc.) in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand), (v) Making good the dismantled portion of C.C. or R.C.C. with mix 1:2:4 (1 cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size wherever required. (vi) Stacking the building rubbish, malba etc. near site within 50 metre lead as per direction of Engineer-in charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in.(a) Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix .(a) 1:6 (1 cement: 6 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

(a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra for depth for manholes.(a) Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.(a) 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete.(a) For pipes 100 to 250 mm diameter

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete

(a) 300 mm diameter metre

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design.(a) 250 mm diameter

Grading roof for water proofing treatment with

.Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade (a) Two or more coats on new work

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.(a) Water thinnable cement primer

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead. (a) Of area 3 sq. metres and below

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete .(a) 25 to 40 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions.(a) 45 cm length 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end ) .(a) 25 mm nominal bore

Providing and fixing European WC seat cover of Standard Design of approved quality and manufcturer ( Pryag Cat no 513 or equivalent) with all of its acessories complete as per direction of Engineer in Charge

Providing and fixing G.I. tank nipple with jam nut & washer complete as per direction of Engineer in Charge.(a) 20 mm nominal bore

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required .(a) 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge

(a) 20 mm nominal dia Pipes

Providing and fixing C.P.V.C. Union in C.P.V.C. pipe including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (New work) (Prince make): a) 20 mm nominal bore

Supplying 10mm to 20mm thick Natural Plain Coir Doormat (Beige) Long-Lasting, Heavy Duty Thick Entryway Rug with Plain Design for Indoor & Covered Door Entrances of size 3 feet X 2 feet of approved colour as per direction of the Engineer-in-Charge.

Renewing glass panes and refixing existing wooden fillets

(a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick (a) Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

Credit for unserviceable dismantled material recovered after dismantling (on as is where is basis)

M.S. scrap (such as M.S. angles, tees, flats, bar and like)

Brass scrap (including C.P.Brass taps, ball cock rods, brass waste etc.)

e) PVC / Plastic scrap (such as PTMT , PVC pipe pieces, old cistern etc.)

PARAGATE SERVICES PRIVATE LIMITED