Construction of District Planning Building at Nandurbar Tal. Dist. Nandurbar (Furniture)

Amount

Suppling and placing three seater teak wood sofa minium size 2100x750x750 milimiter having solid frame structure made with pneumatic nails supported by plywood inner frame made with teak wood. Back rest to have a layer of appeoved make polyster of 180GSM over the foam seats to avoid wrinkle lace and to provide soft feel on upholstery seating cushion to have 100 milimiter elastic webbing of 350 GSM used on the frame with digonal pattern to distribute stress evenly upholstery cover made with good quality leathering/fabric stitched with nylon bonded thread providing lasting strength etccomplet as directed by Engineer in charge All the exposed support parts like leg and side/rare frame to be S.S.As per direction of Engineer in charge.

Suppling and placing one seater teak wood sofa minium size 900x750x750 milimiter having solid frame structure made with pneumatic nails supported by plywood inner frame made with teak wood. Back rest to have a layer of appeoved make polyster of 180GSM over the foam seats to avoid wrinkle lace and to provide soft feel on upholstery seating cushion to have 100 milimiter elastic webbing of 350 GSM used on the frame with digonal pattern to distribute stress evenly upholstery cover made with good quality leathering/fabric stitched with nylon bonded thread providing lasting strength etccomplet as directed by Engineer in charge All the exposed support parts like leg and side/rare frame to be S.S .As per direction of Engineer in charge.

Providing Frabricating and Installing the specified location table using 19 milimiter BWP (IS 710) plywood of approved make for the top ,verticals including sides.All plywood Exteriors surface shall be laminated with 1mm thk. Laminate of approved make and shade,Allunlaminated and undesired areas to be applied with 3 or more cote of french polish of matching approved colour including all required hardware and accessories as per approval of Engineer in charge.

Providing and Fixing of Brass letters on stage with brasso polish &laqure coating after Panelling.

Providing and fixing decorative 8 mm thk.matt finished Accoustic woolen carpet flooring laid on floor with SR synthetic resin chemical treatment for pasting the base of matt as per Engineer incharge.

Supply & installation of wall panelling made of MDF/Charcol grade Pvcboard/fiberglass board louvers backlined with Sound texblack acoustical fleece, tongue-groove edge for a seamless look, Acoustics NRC 0.65-0.75 (For E300* Mounting), size 128x2440x12mm, volume density of base board 800 -830 Kg/m3, 10-10.5Kgs/m2 (L32), The Panneling shall be finished as per the drawings and to the satisfaction of the Engineer in Charge. All the support system shall be as per the Approved make list and the suspension system shall be got approved before starting installation at site.

Providing &Arrangemnt of Featherlight/Wipro/SteelFab or equivalent High Back , Synchronized Mechanism with Multiple Locking, 3600Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5- prong P/Nylon Base with Nylon/Fabric Upholstery.Sample Should get approved from users department before installation.

Providing &Arrangemnt of Featharlight/Wipro/SteelFab or equivalent Mid Back chair, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment,Auto Adjustable lumber support, Standard 5-prong P/Nylon Base with Leatherite/Fabric/Nylon Upholstery.Sample Should get approved from users department before instalation.

12 MM Backpainted Extra clear Glass Top -: Providing and laying 12 millimetre thick Backpainted glass for table top Including chamfering and edages polish etcetera complete. As directed by Architect's Drawing and instructions of Engineer in charge. 6 MM Backpainted Extra clear Toughened Glass -

6 MM Backpainted Extra clear Toughened Glass - : Providing and laying 6 millimetre thick Backpainted toughened glass Wall Cladding/Paneling Including chamfering and edages polish with profile patti of approved colour and size etc complete. As directed by Architect's Drawing and instructions of Engineer in charge.

Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (BevelledTegular) Edge Tiles of size 15mm Silhouetee Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 /Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66%GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 18 mm tkply.of size 50 x 36 mm (finished size) Ply. frame work or size of 600 x 600 mm center or as per site condition covered by 12 mm thick marine plywood of the requisite manufacture vizAnchore / Century /Kenwood /Duro / jet or equivalent generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnutgroov matched veneer pattern and design including melamine polishing & design complete as per Architects Drawing and instructions of Engineer Incharge.

Providing and fixing 75 mm thick partition made of Frame 18 mm thick IS 303 grade Boiling Water Resistant Plywood of 36 mm thick & 50 mm wide with spacing of 600 milimeter center to center both vertically & horizontally. Frame shall be covered on both side with 12 milemeter thick Is303 Grade Boiling Water ResistantPlywood& 8 milimeter thick glass with itching process fixed with the help of teak wood lipping oe required size finished with melamine polish . The plywood covered is finished with 1 milemeter thick laminate Including all hardware, fixtures etc. complete.

Supplying and fixing Officer Table Of Sizes 2.80x1.20x0.75 with side unit 1.50x0.6x0.750 and inbiltpedistal 0.4x0.45x0.650 consist of top made out of 18 mm thick marine plywood of the requisite manufacture vizAnchore / Century /Kenwood /Duro / jet or equivalent generally confiriming to I:S 710-1980 Table Sides made out of 18 mm thk Marin Plywood including two Drawer with Handle and lock Exterior finish with 3.4 to 4mm tk.Veneer and inner finish with inner laminate. Hardware - Ebco/Hettich/Hefele or equivalent. Greenply/Durian/ Adviser/Anchor Make Comm - Plywood and sample should get approved before instalation or as directed by Engineer In charge etc complete.

Providing and fixing Table back unit for Officer Cabin made of 750 mm height made of 18 mm thick commercial plywood as per drawing including shelves and shutters and 12mm thick ply for back and finished the external surface with 3.4 to 4mm tk.Veneer and inner with 0.8 inner laminate of approved quality using high quality fixtures and fastening and as directed by Engineer In charge etc complete.

Supplying and fixing Dining Table Of Sizes 2.50 X 1.00 m and 0.75 height consist of top made out of 19 mm thkbackpainted/clear glass, Table Sides made out of 18 mm thk Commercial Plywoode/teak wood Exterior finish with 1mm Textured laminate or polish for wood sample should get approved before instalation or as directed by Engineer In charge etc complete.

Providing & fixing Large height file storage cupboard made from 18 mm thick Boiling Water Resistant plywood IS 303 grade of approved make for Bottom, top, verticals, shelves & 25mm tk profile glass shutters and 12 mm thick Boiling Water Resistant plywood IS 303 grade of approved make for back side .19 X 10 milimeter Teak wood leaping for all exposed faces of plywood with melamine polish External faces of plywood to be finished with 1 mm thick laminate and internal faces of plywood is finished with 0.80 mm thick inner laminate.All necessary hardware like 75 mm long L Hinges, 100 mm Srtainless Steel Finish handles, locks, magnet, 100 mm Tower bolt etc.areincludeed in the item. 0.45 deep as per detail drawing and design including. (before execution sample should be got approved from Engineer)

Providing and Fixing of Conference Tabel made of 750 mm height made of 18 mm thick commercial plywood as per drawing the external surface finish with 1.0 mm tk Laminate of approved quality using high quality fastening and as directed by Engineer In charge etc complete .

Supplying and fixing Officer Table Of Sizes 2.80x0.9x0.75 with side unit 0.9x0.6x0.750 and inbiltpedistal 0.4x0.45x0.650 consist of top made out of 18 mm thk Commercial Plywood, Table Sides made out of 18 mm thk Commercial Plywood including two Drawer with Handle and lock Exterior finish with 1 mm tk Exterior texture Laminate and inner finish with inner laminate. Hardware -Ebco/Hettich/Hefele or equivalent. Greenply/Durian/ Adviser/Anchor Make Comm - Plywood and as directed by Engineer In charge etc complete.

Providing and fixing Table back unit for Officer Cabin made of 750 mm height made of 18 mm thick commercial plywood as per drawing including shelves and shutters and 12mm thick ply for back and finished the external surface with 1 mm tk Laminate and Inner with 0.8 mm inner laminate of approved quality using high quality fixtures and fastening and as directed by Engineer In charge etc complete.

Supplying and fixing Staff Table Of Sizes 1.20x0.6x0.75 with side unit 1.2x0.5x0.750 consist of top made out of 18 mm thk Commercial Plywood, Table Sides made out of 18 mm thk Commercial Plywood including two Drawer with Handle and lock Exterior finish with 1mm tk Exterior texture Laminate and inner finish with inner laminate. Hardware - Ebco/Hettich/Hefele or equivalent. Greenply/Durian/ Adviser/Anchor Make Comm - Plywood and as directed by Engineer In charge etc complete.

Podium in Corian top Modular Designer Finish: Providing and Fixing on site Corian top and bottom finish corian top finish and SS slotted front side podium desk with cable manager for mic arrangement etc.complet as per drawing and Engineer in charge.

Providing and Fixing of Main Desk on stage made from 18 mm thk commercial ply for structures , Supports ,partation frame 12mm thk flex ply for both sides of modesty partition, External Surface Cover with 6 mm Corian and internal finished with ineer laminate as per dwqetc.complet.

Providing and Fixing of officers table as per the drawing made from 18 mm thk commercial ply for structure & 12 mm thk flexi ply for curves 1 mm thk laminate and 6mm thkCorian as directed by Engineer in charge.(to be measured from front side)

Supplying and Fixing Auditorium Chair with reputed make stand & MS Flat with tip up moment sheat& chair of 21" CTC Back shall have 12 thk ply & PU foam with 100% polysterstrech fabric of approve colour with 5 mm/ 7.5 mm thk foam with wodden armrest of size 425 x 25 x 55/70mm including fixing on site with AdjustabelWritting Tablet with standerd plastic seat number on chair etc.complete.

Providing And Fixing of State/National Emblem of India on stage with brasso polish &laqure coating after Panelling.

Master cleaning job of the office area including the flooring partitions, furniture, windows and walls.

Providing and fixing Mural On provided surface by an artist as per approve by Engineer In charge.

Providing Curtains of american styles for windows of approved material and brand clothes including stiching, fixing curtain rods etc. complete.

Providing and Fixing 18mm thk Ply boxin for cabel covering including all nesessary Fitting as per direction by Engineer Incharge .

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face Veneer 6mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, completed.

Providing And Fixing 12 mm thk Toughen Glass for Partation/paneling of size of require size as per design,with all nessessary fixture and fittings etc.complet.

Providing and fixing 5mm thk Back Painted Mirror/Glass with Design on it for Paneling with Aluminium Profile framing and nessesary fixture for it And as Directed by Engineer in charge.

Providing and Fixing Polyester board Acoustical Suspended Ceiling System with Fiber glass-wool acoustic Tiles of 9 mm thick on Silhouetee Grid. The tile shall be laid on G.I channel 32 with 15 mm wide T - section flanges color white having rotary stitching on all T sections i.e. the MainRunner, 1200 mm and 600 mm Cross Tees with a web height 6of 32 mm and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system.

Shandar Interior Pvt. Ltd

Tathastu Megastructure LLP