Renovation of the building of Committee Room at Beas Dam

Amount

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below.(CSR-8.26)(a)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled Windows of area 3 sqm and below.(CSR-8.26)(b)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling,C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately):For fixed portion and chawkhats(CSR-17.45)(a)

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections conforming to Is: 733 and IS:1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, miteredand jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing /paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately):For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required. (CSR-17.45)(b)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) Float glass panes of 5 mm thickness. (CSR-17.47)(i)

Factory manufactured flush door fixed in position iron hings, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same of position.(c) Decorative with teak facing on both sides edges lipped with teak with laminated core.(iv)35mm thick.(CSR-17.27)(c) (iv)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc complete.(a) ISI designation no I (size of door up to 700mm)(CSR-17.43)(a)

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc complete.(A)300x16mm(CSR-17.49 A)

Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).(CSR-17.22)(iv)

Scraping (a) white wash and colour wash.(CSR-8.31)(a)

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of parisand chalk mitti including finishing the surface to the required finish complete.(CSR-16.6)

Distempering with acrylic washable oil bound distemper (of approved manufactured) one coat over one priming coat on old distempered surface.(CSR-16.11)

Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base.(CSR-8.17)

Providing and laying anti skid ceramic floor tiles of size 300x300mm x10mm thick of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey. Fume red brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete white cement slurry in joints including corners angels and beading.(CSR-14.72)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy , bottle green, black of size 200x300mm, 100x200mm, 200x200mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(CSR-14.125)

Providing and laying vitrified floor tiles in different sizes in light colour shades made using soluble salt technology (thickness to be specified by the manufacture) with water absorptions less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 (cement :4 fine sand), complete (soluble salt print penetration should be up to 1 to 2mm after the tiles are fired & polished.(a)size 600x600 mm (CSR-14:112)

Appling priming coat with metal primer on new steel or iron work including preparation of surface.(CSR-16.20)

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work.(CSR-16.21)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.(CSR-16.16)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.(CSR-16.17)

Deodar wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. Double Rebate (60mm x 150mm)CSR-17.15(i)A

Nicking cement concrete surface (over 28 days old including preparation and laying slurry.(CSR-10.31)

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillarslaid in 12.5mm thick cement mortar 1:3 (1cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match theshade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.(CSR-14.88)

12.5 mm thick cement plaster 1:4.(CSR-15.9)

40mm thick white terrazo topping rubbed and polished to a granolithic finish under layer 34mm thick cement concret 1:2:4 and top layer 6mm thick with 3mm gauge white marble makrana chipping from indigenous marble laid in 1:1½ (37.5 Kg of white cement, 12.5 kg marble powder and 0.05 cum of white marble chippings)CSR-14.28

Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842 - 2000, including top cover of 6 mm coir veneer board, nickel plated MS Pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm MS Flat 10 cm long and rawl plug 50 mm long (designation 10 no) etc., all complete.(CSR-17.57)

Dismantling Sanitary fixtures such as Eurpoean/ Indian/Orissa W.C., PVC/ China warecistern, Wash Hand Basin, Urinal Pot, Sinks andCP Fittings and disposal of dismantled materialwithin a distance of 100 Mtr. complete in allrespect as required by Engineer-in-Charge. Eurpoean/Indian/Orissa W.C.(CSR-30.88)(a)

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China warecistern, Wash Hand Basin, Urinal Pot, Sinks andCP Fittings and disposal of dismantled materialwithin a distance of 100 Mtr. complete in allrespect as required by Engineer-in-Charge.PVC/China Ware Cistern(CSR-30.88)(b)

Providing and fixing in position ChinawareEuropean type water closet P trap or S trap ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI marked, PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entiresatisfaction of Engineer-in-charge.(CSR-30.4)

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut.(CSR-30.8)(a)

Providing and fixing in position vitreous chinaware white lavatory suites of approvedmake (to the approval of Engineer-in-charge)including Rack Bolt Screw Pair 115mm longwithout CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm.(CSR-30.31)(ii)

Providing and fixing in position C.P. BrassAuto close Pillar Cock of approved make (tothe approval of Engineer-in-charge)(CSR-30.34)

Providing & Fixing in position 5mm thickbevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)Size 600mmx450mm.(CSR-30.61)

Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia610mm long.(CSR-30.58)(a)

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P brass towel ring.(CSR 30.58)(b)

Providing & Fixing in postion 15 mm i/d bibcock of approved make (to the approval of Engineer-in-charge )complete in all respect.Brass Bib cock/Stop cock 15mm x 400gm.(CSR-30.65)(A)(iv)

Providing and fixing in position stainless steelsinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304(18/8) with waste coupling complete in allrespect.Rectangular Sink with Deluxe BorderSingle Bowl Overall Size 700 mm x 555mm x 230 mm.(CSR-30.47)(a)

REPLACEMENT OF WIRES, COVER FRAMES,MODULAR SWITCHES, CONCEALED METALBOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPEACCESSORIES) Derived from 34.01:Replacement of PVC insulated copperconductor single core FR cable (ISI marked)overall 1.5sq. mm, 1100volts grade to be laidin existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked,recessed in wall etc., complete with powdercoated/anodized concealed metal boxes(1.6mm thick with Brass lugs) required forsuitable number of modules (Modularaccessories) for having Step type electronicfan regulators (two module) 100watts, bellpush, 6Amp. 2/3 universal socket (shuttered),16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp.switches with indicator etc. and covered withFrame Plate etc., PVC connector (For FanBox and Call Bell), PVC Bush, bonding toearth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket &plug control point) and other petty materialetc. including the cost of above material,cutting and filling up of chases (withfinishing the surface):- (Derived From CSR34.01)CSR-34.08(i)a i) a. Wiring fan point (Without fan box)

ii) Wiring light point

iii) Wiring call-bell point

iv) Wiring 6Amp. wall socket point

vi) Wiring 16/20Amp. power plug control point

viii) Wiring light point with double control switches.

PVC INSULATED FR COPPER CONDUCTOR CABLES Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge(CSR-34.09) ii) Overall size 1.5sq.mm (Un-sheathed)

iii) Overall size 2.5sq.mm (Un-sheathed)

iv) Overall size 4sq.mm (Un-sheathed)

PVC, HDPE PIPES & PVC FLEXIBLEPIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-CSR-34.12 x)Heavy Gauge PVC Conduit Pipe 25mm dia.(Flushed)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB'sSupply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&Ndistribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-CSR-34.17 viii) TP&N Horizontal Double Door Distribution Board 12 way each

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size ofthimbles/lugs:-CSR-34.16 ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

xvi) MCB Four Pole 50, 63amp. (10kA, Curve-C)

Ceiling Fan

LED surface ceiling Light

Bidder Name

Amount in Words

RANJIT SINGH RANDHAWA CONTRACTOR

Ravinder Kumar Govt. Cont.

PARMINDER KUMAR KANWAR

SOURAV SHARMA

Ravinder Kumar Govt. Cont.

PARMINDER KUMAR KANWAR

SOURAV SHARMA