REPAIRS TO DIRECTION BOARDS, ROAD SIGN BOARDS AND PAVED AREA AT INSIDE DEPOT AREA CAD PULGAON

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness as in floors, pavings, aprons, pathway etc laid dry or laid dry and pointed complete all as specified & directed.

Dismantling of cement concrete (unreinforced) kerb stone and the like of any description of and in any position not otherwise specifically provided for complete all as specified and directed

Exavation in trenches not exc.1.5 m wide and n.exc 1.5 m in depth as in drain and getting out in soft/loose soil, complete all as specified and directed.

M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor fcomplete all as specified & directed.

M&L cement concrete 75mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified & directed.

Material & labour for Glossy finish concrete coloured tiles with pigment of size 300 mm x 300 m x 25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

M & L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over sand cushing complete all specified and directed. Note :- Sand cushioning will measured and paid seperately.

S&F for Machine pressed precast concrete interlocking paver block any shape and size confirming to S 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid over sand cushing complete all as specified & directed. Note :- Sand cushioning will measured and paid seperately.

Supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 cm thick in each layer complete all as directed

M&L Pre-cast (Factory casted) cement concrete Kerb stone casted in PCC (1:2:4) Type B-1 using 20mm graded stone aggregates with plan or interlocking joints (as directed) with solid blocks, exc. 10 cm in width and setting and jointed in cement mortar 1:6, complete all as specified & directed.

M & L for preparation of kerb stone, new un-treated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint in black and white colour over a coat of primer complete all as specified and directed.

Roughening the surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified & directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel, gap between road & road side kerb stone and the like including finishing the top of benching even and smooth using extra cement complete all as specified & directed.

Material & Labour for Reinforced concrete pipes, class NP3, 200mm bore, laid in trenches and jointed with collars and rings of suitable dia condforming to AI of IS 5382 : 1967 and joint finally packed with cement sand mortar 1;1 including dismantling of old pipes of any type and making good around complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

S & F in repairs Solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directection. Model/Make: Model 3M/7M/'DHRUV' of Dark Eye or equivalent

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

Dismantling of Sign/information board of any description, shape & size including post and frame all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cu.m, getting out in soft/loose soil and removing surplus soil to a distance n exc 50m complete all as specified and directed.

M&L for Cement Concrete type C 2 1:3:6 using 40 MM graded stone aggregate as in foundation filling and mass concrete in fixing of fencing post including necessary form work if required at site complete all as specified and directed.

M&L Stainless steel Square/Round pipe of SS 304 grade for frame work as in post & frame of sign boards with SS plate, nut, bolts etc including drilling/welding/reveting for fixing of ACP sheet complete all as specified and directed.

Supplying & fixing in repairs retro reflective sign board made of high intensity retro reflective sheeting pasted on both sides of 5mm thick ACP sheet with letters/grphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery densioin as approved by I.R.C./MORTH duty plotted cut of approved colour fixed with SS frame work complete all as specified and directed by Engineer-in-Charge. Note : SS Frame work Shall be measured as paid seperately.

Supplying & fixing in repairs retro reflective sign board made of high intensity retro reflective sheeting pasted on one side of 5mm thick ACP sheet with letters/grphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery densioin as approved by I.R.C./MORTH duty plotted cut of approved colour fixed with SS frame work complete all as specified and directed by Engineer-in-Charge. Note : SS Frame work will be measured as paid seperately.

Supplying & fixing in repairs retro reflective sign board made of high intensity retro reflective sheeting pasted on both sides of 2mm thick aluminium sheet with letters/grphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery densioin as approved by I.R.C./MORTH duty plotted cut of approved colour fixed with SS frame work complete all as specified and directed by Engineer-in-Charge. Note : SS Frame work Shall be measured as paid seperately.

Supplying & fixing in repairs retro reflective sign board made of high intensity retro reflective sheeting pasted on one side of 2mm thick aluminium sheet with letters/grphics to be overlayed high intensity retro reflective sheeting of make 3M/Avery densioin as approved by I.R.C./MORTH duty plotted cut of approved colour fixed with SS frame work complete all as specified and directed by Engineer-in-Charge. Note : SS Frame work Shall be measured as paid seperately.

S&F Mild steel Framed work using angle Iron ,flat Iron ,round bars as in security doos/gates with end of bars shouldered and or rivetted or forged into spikes ,framed guard bars barred into iron doors ,walkways railing framework amd similler work confiming to Fe 290 ,GDE E-165.

S&F in repairs Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work,in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard/dense soil for repair of road side berms.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Removing excvated soil n exc 50mtr and depositing where directed at a level n exc 1.5 above starting point.

Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick/stone masonry surfaces or surfaces of brick/Stone work of walls, finishing the surface even & smooth without using extra cement complete all as specified.

M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed.

M/S Darshan Singh Plaha

Arnav Enterprises

M/S L M Chourasia

MAHARASHTRA ENTERPRISES

SHREE CONSTRUCTIONS

SHRIKANT CONSTRUCTION

SHREE SIDDHIVINAYAK TRADERS

NEELKAMAL BUILDERS

M/s VILAS RATAN MENDHE

Bidder Name

M/S L M Chourasia

M/S Darshan Singh Plaha

SHREE CONSTRUCTIONS

SHREE SIDDHIVINAYAK TRADERS

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia

MAHARASHTRA ENTERPRISES

Arnav Enterprises

NEELKAMAL BUILDERS

SHRIKANT CONSTRUCTION