REPAIR TO JOINERY SUNKEN FLOOR, PLUMBING SANITARY SOIL AND WASTE FITTING IN MD ACCN I.E. SHIVAJI ENCLAVE, PEERU SINGH ENCLAVE, BADLU SINGH ENCLAVE AND WATER SUPPLY ENCLAVE IN ZONE B AND N AREA UNDER GE N AT BATHINDA MIL STN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and removing from site including cutting holes for removal of hold fast complete.

Taking down shutters of any description not exceeding 1 Sqm each and removal from site.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each and removal from site.

Refixing of shutters exceeding 1 Sqm and not exceeding 2 Sqm in the same opening including taking down complete all as specified.

Resecuring or easing and adjusting , without taking down shutters or any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and as directed.

S & F first class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc, and removing old beads to store.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 75 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 105 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

S & F factory made pressed steel frames for door with one or more rebates including necessary fixing lugs, lock strike plate, hinges etc, compete, all as specified of frame size 125 mm x 60mm & thickness of MS sheet shall not be less than 1.25 mm including making holes for fixing hold fast etc and making good the wall with plaster in cement mortar (1:6) complete.

M & L for MS framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, not exceeding 10 Kg each brackets, conforming to Fe 290 Gde E-165.

Cutting holes in brick walls built in cement mortar for inserting hold fast/ angle of cooler stand and making good dismantled portion in CM 1:3 or Cement concrete 1 : 2 : 4 , type B1 as required , depth exc half brick but not exc one brick walls depth of embedded portion holdfast or lugs measured from the face of jamb into walls complete all as directed.

M & L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate in filling back of PS chowkats/ door frame or bed block of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick veneered particle board with commercial veneering on both faces conforming to IS-3097 exterior grade kiln seasoned and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003 (Part I).

S & F factory made glazed and skeleton shutters 35mm thick using second class hard wood open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24(a); all as specified complete.

M & L for factory made flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides complete.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete.

S & F mild steel barrel tower bolts 200 mm long stove enamelled black with bright bolt complete all as specified.

S & F MS sliding door bolt, plate type stove enamelled black with bright bolt not less than 12 mm dia length of bolt 300 mm including a minimum of 6 bolts , nuts and washers complete all as specified

S & F MS pressed handle, ovel type, stove enamelled black size 200 mm all as specified.

S & F 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S & F in repairs 300 mm long MS ordinary rat tail rod pattern springs for doors including roller and roller plate complete.

S&F floor door stopper 150 mm size of aluminium alloy body and tounge, anodised with hard drawn steel spring complete all as specified and directed.

S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement all as per instruction and drawing shown for item No 8080 of SSR Part II.

S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section. (ISI Marked) complete all as specified.

S & F butt hinges, medium weight, cold rolled mild steel , size of hinges 100mm.

S & F aluminium handle, fabricated type size 150 mm all as specified.

S&F 100 mm size Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws

S & F factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one shop coat primer complete all as specified..

S & F factory made steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one shop coat primer complete all as specified..

S & F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified.

S & F factory made fixed type steel ventilator with top hung shutter incl hinges steel pegs & stays with one shop coat of red oxide primer complete all as directed.

Dismantling of structural steel work including doors, gates but excluding framed truss etc.

S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc shall be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed conforming to Fe 410-W, Gde E-250 quality B.

M & L for particle board, 18/19mm thick, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work as in cupboard shelves etc complete all as specified.

S & F in repair cast iron or mild steel drawer pulls, 3 screw plate with fixed dished pull; 80mm to 100mm long complete.

S&F Continuous piano hinges, mild steel, bright finish or electrogalvanised with flaps of 30 mm (when open) width complete all as specified.

S & F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished.

S&F in repairs curtain rod mild steel, chromium plated of 19/20 mm dia fixing with brackets, stops, rollers etc complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips of size not exceeding 0.5 Sqm each pane complete.

S & F sheet glass, 4 mm thick ordinary quality and glazing with oil putty in any shape not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads complete all as specified.

S & F sheet glass, 3 mm thick frosted quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed with oil putty or wooden beads complete all as specified.

M&L Welding in repairs, not exc. 6mm thick metal and not exc 2.50cm in length complete.

Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6).

M & L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of new or previously untreated surfaces of wood and wood base surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified.

Demolition and Digging out and removing sunken floor filling and depositing the same at a distance not exceeding 250 M where as directed including cleaning the sunken surface by wire brush complete all as specified .

M&L for sunken treatment to sunken floor, cleaning the surface by using wire brush, rendering to floor and sides with 10 mm thick cement mortar (1:4) including mixing of integral water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement after that material & labour for providing two coats of two components (one part liquid two parts powder) ready to use cementations water proofing coating on properly prepared surfaces by brushing having elongation of >50% for the applying water proofing treatment as per following on horizontal and vertical surfaces of sunken floor complete all as per manufacturers instruction. (i) Applying 1st coat of two components modified polymer coating. (ii) Provn of glass fiber mess of 2 x 2mm immediately on alone coating. (iii) Apply 2nd coat of two components modified polymer coating after 72 hrs on horizontal and vertical surfaces. Note :- WP Materials shall be measured and paid for separately.

M & L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling of sunken floor complete all as specified.

M & L for 30mm thick PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate with using water proofing compound as per manufacturer's instruction as in sunken floor all as specified.. (Note :- WP Materials shall be measured and paid for separately.)

M & L for 40mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf / sqcm, fixed complete to walls, ceilings or in floors etc complete all as specified.

S&F in repairs plastic water closet seat cover black or white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs vitreous china wash down water closet , (pedestal pattern) EWC , white with white coloured seat cover , 'P' or 'S' trap including connection to drain or outgoing pipe and to flushing pipe, etc. including making good to floor and excluding flushing cistern and flush pipe a complete.

S&F in repairs vitreous china wash down water closet , (semi-pedestal pattern) (Anglo Indian Type) EWC , white with white coloured seat cover , 'P' or 'S' trap including connection to drain or outgoing pipe and to flushing pipe, etc. including seat cover complete.

S & F in repairs vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor and excluding flushing cistern, flush pipe and waste pipe complete.

S & F in repairs PVC valve less, syphonic action type, flushing cistern, 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC flushing pipe 32mm dia complete.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete.

Taking up or down in repairs 15mm bore galvanized iron/ UPVC tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Taking up or down in repairs 20mm bore galvanized iron/ UPVC tubing and connections, including cleaning for refixing or removal to store complete all as specified.

Refixing of old 15 mm bore galvanized iron/ UPVC tubing and connections in new or old position (walls, ceiling, floors etc.)

Refixing of old 20 mm bore galvanized iron/ UPVC tubing and connections in new or old position (walls, ceiling, floors etc.)

S & F UPVC tubing with all fittings and fixed to walls & ceiling or laid in floors, bore of pipe 15 mm bore complete all as specified

S & F UPVC tubing with all fittings and fixed to walls & ceiling or laid in floors, bore of pipe 20 mm bore complete all as specified

S&F in repairs 500 literes capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any size and any type and removing from site etc all as directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 25mm-455 gram) complete all as specified.

S & F in repairs stop cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe.

S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified.

S&F in repairs stop valves / angle valves , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore dia of pipe complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps , waste, chain and plug and porcelain stopper and fixing on existing brackets complete, .

S&F pillar taps, cast copper alloy, with capstan heads, fancy type, quarter turn, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe for 15mm bore dia of pipe.

S&F in repairs pillar taps, cast copper alloy, with capstan heads, fancy type, quarter turn, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe for 15mm bore dia of pipe.

S&F in repairs brass CP mixer for mixing hot and cold water screwed for iron pipe and fixing of 15 mm bore complete all as specified.

S&F in repairs brass chromium plated soap dish of size 100 x 100 x 60 mm fixed to wall with brass screws all as specified.

S & F in repair brass chromium plated shower rose 125 mm size with or without swivel joints incl fixing to steel pipe or union complete all as specified and as directed.

S&F stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore dia of pipe complete all as specified.

S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore dia of pipe.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long including end brackets complete all as specified.

S & F 75mm dia cast iron floor trap with chromium plated grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified.

S & F 100 mm dia cast iron floor trap with chromium plated grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified.

S & F in repairs 100 mm dia cast iron spun soil , waste and vent pipe in any length with or without ears fixed with chemical cement joints laid in trenches or in floors/ fixed to walls including taking down all pipes etc complete all as specified.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified.

S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete.

S & F 100mm dia cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified.

S & F 75mm cast iron Cowl fixed with cement joint in CM 1:2 complete all as specified.

S & F 100mm cast iron Cowl fixed with cement joint in CM 1:2 complete all as specified.

S & F PVC (SWR) pipe 110 mm bore size for rain water pipe conforming to IS : 1984 incl standard PVC clamp & imbedded in PCC block incl jointing of pipes including taking down all pipes complete all as specified.

S & F 110 mm bore PVC bends ISI marked of any radius / shoe, fixed to PVC pipes all as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M & L for 15 mm thick on internal surface rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth ( without using extra cement), complete all as specified.

M & L for 10 mm thick on ceiling surface rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finished even and smooth ( without using extra cement), complete all as specified.

M & L for rendering 15 mm thick in cement mortar (1:4) mixing with WPC @ 3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified. (NOTE – WP material shall be measured and paid for separately.)

Supply only integral water proofing compound, ISI marked.

M&L for applying three coats of white wash on ceiling including preparation of surfaces newly plastered surfaces of ceiling complete all as specified .

M & L for preparation of newly plastered surfaces of walls and applying two coats of distempering over chalk, whiting on plastered surface, preparatory to distempering over a coat of suitable primer complete all as specified.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint (one coat as a priming coat) complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) with using space complete all as specified. Note: Only course sand shall be used in screed bed.

M&L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile with including 15 mm thick Screed bed or bedding layer in CM (1:6) with using space complete all as specified. Note: Only course sand shall be used in screed bed.

M & L for vitrified ceramic tiles, double charged, 9 to 10 mm thick (square / rectangular), light shade, polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 15 mm thick Screed bed or bedding layer in CM (1:6). (Screed bed shall be measured and paid for separately)

S & F glazed ceramic coloured tiles 450 x 300mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 15 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile complete all as specified.

S & F glazed ceramic coloured tiles 300 x 200mm, 7 to 8mm thick in verticle surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement pigmented to the match the shade of tiles laid over and including 15 mm thick rendering in cement mortar (1:4) as backing coat and finish the surface rough to receive the tile complete all as specified.

Cleaning and removing all scale and dirt etc from exiting serviceable PVC over head tanks of capacity 500 litres disconnecting or lowering taking out mud form tank after proper drain out the water ( manual or mechanically) and from mouth of circulating pipes etc. after cleaning checking all inlet and out let connections and tightening the same as required , lid of tank refix properly complete all as directed.

Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition).

M & L for RCC (1:2:4) type B0 using 12.50mm graded stone aggregate as in slab supported on walls , beams and columns in floors , roofs , landings , balconies , canopies , deck slabs , shelves and the likes complete all as specified.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) for flat rough surfaces of concrete complete all as specified.

S & F mild steel TMT bars 10 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 410-W, Gde E-250 complete all as specified .

All as per ser item No. 110 here-in-before but 8mm dia in stirrups, spacess and binders complete all as specified.

S&F brass chromium plated bottle traps 32 mm bore hole for wash hand basin with inlet and outlet screwed for iron pipes or connection including necessary packing, union and cap fixed complete all as specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S & F in repairs stainless steel chromium plated flushing jet for pedestal pattern WC including fixing flexible pipe and brass CP Nuts , complete all as specified.

S & F in repairs waste pipe and waste coupling of any size and any type for sink/ WHB complete all as specified.

S & F in repairs PVC (SFMC) straight coupler compression 16 x 20mm PVC compression pipe of dia 16/20mm complete all as specified.

S & F in repairs PVC (SFMC) Tee 3 sides coupler composite compression 20 x 20mm PVC compression pipe of dia 20/25 mm complete all as specified.

S & F in repairs PVC (SFMC) elbow one side coupler and one side thread composite compression 16 x 20mm for PVC compression pipe of dia 16/20 mm complete all as specified.

S & F in repairs PVC (SFMC) Tee 2 sides coupler and one side thread composite compression 16 x 20mm PVC compression pipe of dia 16/20 mm complete all as specified.

S & F in repairs PVC (SFMC) elbow both coupler composite compression 16 x 20mm for PVC compression pipe of dia 16/20 mm complete all as specified.

M/s Kamal Builders

Ajay Enterprises

V K CONTRACTOR

N.G BUILDERS

SHARDA ENTERPRIES

R K GOYAL & COMPANY

M/s MITTAL CONSTRUCTIONS