SPECIAL REPAIRS TO JOINERIES (DOORS AND WINDOWS) AT AF STN SALUA UNDER GE (AF) KALIKUNDA

Amount

Taking down chowkats or frames with shutters not exceeding 1.5Sqm (without taking off shutters from the frames), complete all as specified and as directed.

Taking down chowkats or frames with shutters exceeding 1.5Sqm but not exc 4 Sqm each (without taking off shutters from the frames), complete all as specified and as directed.

Taking down Shutters of any description exc 1 sqm and n exc 2 sq. m each complete all as specified and as directed.

Taking down Shutters of any description not exc. 1 sqm each complete all as specified and as directed.

S&F 125 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. with one shop coat of red oxide primer complete all as specified and as directed.

S&F 105 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. with one shop coat of red oxide primer complete all as specified and as directed.

S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thicl BWP commercial ply or 12mm veneered particle board with commercial face veneers on both faces or 10mm bison panel, complete all as specified and as directed.

S&F 35mm thick factory made second class hard wood glazed and skelton shutters open rebated and prepared to receive the glass gauge etc edge of framing plain chamfered or rounded fitted with out and mitered beads for securing glass etc complete all as specified and as directed.

M&L for plain cement concrete type B1, 1:2:4 (using 20mm graded stone stone aggregates) for fixing hold fast complete all as specified and as directed.

M&L for plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone stone aggregates) cast in situ for filling the pressed steel frames complete all as specified and as directed.

S&F 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clip of steel cast or extruded section with fixing bolt and sliding bolt of extracted section or cast aluminium alloy complete all as specified and as directed.

S & F aluminium anodized tower bolt 200 mm long complete all as specified and as directed.

S & F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 75 mm long complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodized, complete all as specified and as directed.

S&F steel windows or ventilators, fixed type, with glazing bars dovetailed or welded, complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S & F steel windows with side hung shutter including projecting type hinges as with steel handle, steel peg stay complete with glazing bars dovetailed or welded, complete all as specified and as directed.

S & F steel windows with side hung shutter including projecting type hinges as with steel handle, steel peg stay complete with out glazing bars dovetailed or welded, complete all as specified and as directed.

S&F mild steel 100 mm long butt hinges medium weight cold rolled, complete all as specified and as directed.

S&F mild steel 75 mm long butt hinges medium weight cold rolled, complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S & F 3mm thick glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S&F Sheet glass 3mm thick is ground or obscured or frosted, on one side , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed.

Dismantling structural steel work including doors, gates, ladders, rolling shutters but excluding framed truss etc complete all as specified and as directed.

S&F mild steel work in framed work such as grills, gratings,etc with ends of bars shouldered and/riveted, or forged in to spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways railings; frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and as directed.

S&F 1.6 mm thick MS plain black sheet Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc complete all as specified and as directed.

S&F 1st class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed.

S&F for Plain Aluminium sheeting Alloy of 0.56mm thickness, 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut)complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated wood surfaces exc 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F 150 mm over all length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:6 on other than fair face of brick work surfaces finished even and smooth with out being extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on other thatn fair face of brick work surfaces finished even and smooth with out using extra cement complete all as specified and as directed.

M&L preparation of newly plastered wall and applying two coats distemper oil emulsion over coat of primer to prepare for distempering complete all as specifed and as directed.

M&L preparation of newly plastered wall and applying two cement based paint over a coat of alkali resistant primer paint to wall surfaces including preparation of surfaces, complete all as specified and as directed.

M&L particle board 18/19mm thick , medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work completed all as specified and as directed.

S&F 2nd class soft wood plain fillets square not exc 3 Sq. cm sectional area , rectangular or triangular in section, clean sawn, secured with nails, complete all as specified and as directed.

S&F MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed in repairs complete all as specified and directed.

S&F Small fittings such as brackets of any type of 1st class soft wood, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

SUMAN CONSTRUCTION

M/s Tekcon International

MS R.K.ENTERPRISE

SENCO

SUDHA ENTERPRISES

Lotas Engineers

NAVYUG CONSTRUCTION

Palak Infracon