Construction of Police Chawki at Baradari Chouraha Ward No. 27 Zone No. 09 file No. 301/25X3/3

ALL KINDS OF SOIL

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 40 MM MAXIMUM SIZE OF STONE AGGREGATE

RANDOM RUBBLE MASONRY WITH HARD STONE IN FOUNDATION AND PLINTH WITH CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES,

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

"WALLS (ANY THICKNESS) INCLUDING ATTACHED PILASTERS, BUTTERESSES, PLINTH AND STRING COURSES ETC"

"SUSPENDED FLOORS, ROOFS, LANDINGS, BALCONIES AND ACCESS PLATFORM."

"COLUMNS, PILLARS, PIERS, ABUTMENTS, POSTS AND STRUTS."

HOT ROLLED DEFORMED BARS

CEMENT MORTAR 1:6(1 CEMENT : 6 COARSE SAND)

1:6 (1 CEMENT: 6 SAND)

1:6 (1 CEMENT: 6 SAND)

MOORUM/HARD COPRA

"62 MM THICK CEMENT CONCRETE FLOORING WITH CONCRETE HARDENER TOPPING UNDER LAYER 50 MM THICK CEMENT CONCRETE GRADE M-15

"PROVIDING AND LAYING VITRIFIED FLOOR TILES (WITHOUT SOLUBLE SALT) OR PRINTED (WITH SOLUBLE SALT) NANO POLISHED (GLOSSY

"PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC WALL TILES 300X450 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORMI

"PROVIDING AND APPLYING 1.0 MM THICK WHITE CEMENT BASED WALL PUTTY OF BEST QUALITY, OVER PLASTERED SURFACE TO PREPARE TH

TWO OR MORE COATS ON NEW WORK

PROVIDING AND FIXING C.P. BRASS STOP COCK (CONCEALED) OF STANDARD DESIGN AND OF APPROVED MAKE CONFORMING TO IS:8931. - 1

20 MM NOMINAL OUTER DIA .PIPES.

15 MM NOMINAL OUTER DIA .PIPES.

"PROVIDING AND PLACING ON TERRACE AT ALL FLOOR POLYETHYLENE WATER STORAGE TANK ISI : 12701 MARKED WITH COVER AND SUITABL

110 MM DIAMETER OD

LIGHT POINT/FAN POINTS.SHORT POINT

LIGHT POINT/FAN POINTS.MEDIUM POINT

LIGHT POINT/FAN POINTS. LONG POINT

3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARD SHORT POINT

3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARD MEDIUM POINT

3 PIN 6 AMP SOCKET OUTLET ON SEPARATE BOARD LONG POINT

"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHES, SOCKETS FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ.

CIRCUIT WIRING 2X2.5 SQ.MM.

CIRCUIT WIRING 6X2.5 SQ.MM.

SHORT POINT ON SEPARATE BOARD

MEDIUM POINT.ON SEPARATE BOARD

LONG POINT.ON SEPARATE BOARD

4 MODULE

12 MODULE

1 X 1.5 SQ MM

1 X 2.5 SQ MM

2 X 2.5 SQ MM

6 AMP TO 32 AMP RATING

SAME BOARD SOCKET 16 AMP

CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP

TUBELIGHT LED 1X20/22 WATT

SUPPLING & FIXING OF APPROVED,FAN REGULATOR SINGLE/DOUBLE MODULE ON EXISTING BOARD-UPTO120WATT

10 AMPS PLUG ONLY

USING M.S. ANGELS 40X40X6 MM FOR DIAGONAL BRACES.