Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.7 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | Rejected-Technical | - | Rejected-Technical CONDITIONS OF TECHANICAL BIDS NOT FULFILLED |
| Sl No | Description | Qty | Unit | MIK ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00STAGE-0 | ||||
| 1.10 | Providing, installation, testing and commissioning of 2500 GPH x 100 meter head submersible pump motor set at WSS Gund-Adalkote at Shahbanbass(Location)-2 for bore well along with 01 no as standby (1+1 standby) of standard make viz KSB / Kirloskar. The job includes fabrication of adapter nipple out of 65 mm dia G.I pipe for joining one end of the adapter with the NRV of submersible pump set and the other end to be welded with M.S flange fabricated out of MS plate for fitting with column pipe. Fabrication of tie rod and welding of two nuts on opposite side of adapter to facilitate the fitting of tie rod. The job includes shifting of the pump motor set along with accessories, tools and tackles to the tube well at WSS Gund-Adalkote at Shahbanbass(Location)-2 Ramban. Providing & Fabrication of 60 meters GI column / delivery pipes of 65 mm dia, 3 meters length each with MS flanges with 4nos. holes on each side of column pipe. Making 2nos. grooves on each flange to accommodate submersible cable. The top column pipe shall be fabricated by providing 1no, 12mm thick MS flange of size 350 mm dia on one side so as to rest the complete connected column pipes with submersible pump motor set on casing pipe. The casing pipe shall be provided with a cut for keeping a provision of submersible cable. one end of delivery pipe shall be provided and welded with 65 mm dia MS bends with proper flanges as per site condition for fitment of sluice valve. Fabrication of 2 sets of MS clamp set suitable for 65 mm dia column pipes with proper tempering and no slipping mechanism. Job includes lowering of pump motor set along with column assembly & submersible copper cable to the required depth with the help of chain pulley block and tripod stand & other tools & tackles. Job also includes providing and fabrication of M.S Gantry along with providing and fixing of 3 ton capacity chain pulley block for extraction/lowering of pumping machinery. The job also includes Providing, laying and fitting of 6mm2 three core multistrand PVC submersible copper cable approximately 200 meters in length duly crimped complete with thimbling & insulation work. Job covers providing and fitting of 63 ampere MCCB-1no. of 50KA breaking strength inside the pump room. Testing and commissioning of pump set after making electrical connection with main switch, power cables and LT control panel with submersible cable, The job includes cost of material, labour, hire charges of tools and tackles, manual/mechanical carriage.(Complete job) | 1 | job | 2,59,000 ₹3,05,620 Lowest |
| 1.20 | Design fabrication providing installation testing and commission of 50 Amp, 415 V, 3 phase LT Control Panel cum Star delta auto starter complete with protection and safety mechanism, inside the pump room for pumping unit of bore well .The complete system should be enclosed in MS steel enclosure box of suitable dimensions. Providing and fitting of 1no. Voltmeter (0-500V) and 1no. Ampere meter (0-100 ampere). The internal wiring should be done with flexible PVC LT Cable with proper thimbling at each end. The system should trip the motor on power failure and on appearance of any electrical fault mentioned below which may otherwise damage the motor fields coils. Thus providing protection to the motor, 1. Low voltage below 350V, 2. High voltage above 450V ,3. Single phasing, 4.Reverse phasing, Unbalanced phasing in addition to the system shall have separate LED fault indicators, LED phase indicators isolation/by pass system/Siren audio warning system which activates on starter failure only/over load protection/ under Load protection. Testing of control Panel after making incoming and outgoing connection on load and then on full load. The job also includes Providing & fitting of 250 Amp main switch=01 no. Job also includes proper chemical earthing of the equipments. The job includes cost of material, labour, hire charges of tools and tackles, manual/mechanical carriage.(Complete job). | 1 | Job | 1,42,346 ₹1,67,968 Lowest |
| 1.30 | Providing, installation, testing and commissioning of 5000 GPH x 250 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each including 80mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no, gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 80mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 80mm dia and NRV 80mm dia along with by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate)gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 35mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length along with neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc. | 2 | Jobs | 8,98,000 ₹19,57,640 Lowest |
| 1.40 | Making connection of Sump outlet pipe with suction lines through 100mm dia MS pipe manifold or direct. Making connection of delivery lines with rising main through 100mm dia MS pipe manifold. Job includes providing and fitting of bus bar arrangement complete with frame and insulation work on the wall of the pump room. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of 3 ton chain pulley block and maintenance tool kit as per enclosed annexure. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc. | 1 | Job | 1,90,678 ₹2,26,000 Lowest |
| 1.50 | Design, fabrication, carriage, installation, testing and commissioning of 110 ampere LT control panel at pumping station by way of fabrication of auto starter with 3 pole Main and delta power contactors of 110A rating 01 no. each and star power contactor of 70A rating-1no,compatible with the design rating of the panel and prime mover, of reputed make, conforming to ISI standards. The system should be provided with fault analyzer cum controller unit or equivalent of standard and reputed make. The complete system should be enclosed in MS steel enclosure box of suitable dimensions. The enclosure should be finished with powder coated painting from inside as well as from outer surface of approved colour. Providing / laying of copper conductors of proper rating along with insulation material as per site requirement. The enclosure should be front shutter mounted with key locking system having glass window. Digital electronic voltmeter & ampere meter should be provided along with the required current transformer and selector switches. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The system should trip the motor on power failure and on appearance of an electrical fault mentioned below which may otherwise damage the motor field coils and should not restart automatically until unless the system is reset manually, thus providing automation to the system and protection to the motor .The system / star delta auto starter should not fall into delta if it does not fall into star mode first and should remain de-energised to avoid damage to the motor / machinery and also to the power source / transformer. The system / star delta auto starter should trip off if it does not fall into delta & remains in star mode for more than 10-20 seconds. The system shall provide protection against:-Low voltage below 350 V, High Voltage above 450 V, Single phasing, Reverse phasing, Un Balanced phasing, Dry running, Overloading. In addition the system should have the following audio & visual features for a quick and accurate diagnosis of the appeared fault / status for a speedy rectification of the system-- Separate LED fault / status indicators, LED phase indicators. An isolation by pass system, for fault analysis of system, with a blinking indicator. An audio warning system/Siren which activates only on starter failure to trip the motor on appearance of any electrical fault mentioned above, to warn the operator to switch off the motor manually.3 LED, contactor ‘COIL OK’, indicators, one for each of the contactors / coils. LED star & delta indicators to access the star to delta timing. A tamper proof starting system to avoid manipulations by the motor operator to keep the system in a permanently ON position. Subsequently testing the complete system on, no and full load. Job also includes proper chemical earthing of the equipments. The job includes cost of material, labour, hire charges of tools and tackles, manual/mechanical carriage.(Complete job). | 2 | Jobs | 2,72,000 ₹5,92,960 Lowest |
| 1.60 | Providing, carriage, installation, testing and commissioning of 3 phase, 100 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber along with allied works (common for bore well and pump room stage zero) . Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of 3.5 core armoured Al. cable of 120mm2 from electric pole to 250 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 50mm2 copper cable from 250 ampere main switch to voltage stabilizer and further from voltage stabilizer upto Bus bars approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc. | 1 | Job | 2,76,825 ₹3,26,653 Lowest |
| 2.00STAGE-1ST | ||||
| 2.10 | Providing, installation, testing and commissioning of 5000 GPH x 220 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each including 80mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no, gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 80mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 80mm dia and NRV 80mm dia along with by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate)gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 35mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length along with neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc. | 2 | Jobs | 5,72,000 ₹12,46,960 Lowest |
| 2.20 | Making connection of Sump outlet pipe with suction lines through 100mm dia MS pipe manifold or direct. Making connection of delivery lines with rising main through 100mm dia MS pipe manifold. Job includes providing and fitting of bus bar arrangement complete with frame and insulation work on the wall of the pump room. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of 3 ton chain pulley block and maintenance tool kit as per enclosed annexure. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc. | 1 | Job | 1,90,678 ₹2,26,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.2 L
Closing Date
2 Dec 2023, 3:00 pmClosed
XEN JAL SHAKTI PHE MECHANICAL DIVISION UDHAMPUR
MH MORH
Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Gund-Adalkote at Shahbanbass Location-B
2023_PHE_235135_4
ENIT NO. 63-JJM OF 2023-24
Open Tender
Repair and Maintenance Works
Item Rate
120 days
XEN JAL SHAKTI PHE MECHANICAL DIVISION UDHAMPUR
Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Gund-Adalkote at Shahbanbass Location-B
8 documents required · 8 mandatory
₹500
XEN JAL SHAKTI PHE MECHANICAL DIVISION UDHAMPUR
₹1.2 L
Yes
14 Dec 2023
28 Oct 2023
4 Dec 2023
28 Oct 2023
2 Dec 2023
28 Oct 2023
Amount
STAGE-0
Providing, installation, testing and commissioning of 2500 GPH x 100 meter head submersible pump motor set at WSS Gund-Adalkote at Shahbanbass(Location)-2 for bore well along with 01 no as standby (1+1 standby) of standard make viz KSB / Kirloskar. The job includes fabrication of adapter nipple out of 65 mm dia G.I pipe for joining one end of the adapter with the NRV of submersible pump set and the other end to be welded with M.S flange fabricated out of MS plate for fitting with column pipe. Fabrication of tie rod and welding of two nuts on opposite side of adapter to facilitate the fitting of tie rod. The job includes shifting of the pump motor set along with accessories, tools and tackles to the tube well at WSS Gund-Adalkote at Shahbanbass(Location)-2 Ramban. Providing & Fabrication of 60 meters GI column / delivery pipes of 65 mm dia, 3 meters length each with MS flanges with 4nos. holes on each side of column pipe. Making 2nos. grooves on each flange to accommodate submersible cable. The top column pipe shall be fabricated by providing 1no, 12mm thick MS flange of size 350 mm dia on one side so as to rest the complete connected column pipes with submersible pump motor set on casing pipe. The casing pipe shall be provided with a cut for keeping a provision of submersible cable. one end of delivery pipe shall be provided and welded with 65 mm dia MS bends with proper flanges as per site condition for fitment of sluice valve. Fabrication of 2 sets of MS clamp set suitable for 65 mm dia column pipes with proper tempering and no slipping mechanism. Job includes lowering of pump motor set along with column assembly & submersible copper cable to the required depth with the help of chain pulley block and tripod stand & other tools & tackles. Job also includes providing and fabrication of M.S Gantry along with providing and fixing of 3 ton capacity chain pulley block for extraction/lowering of pumping machinery. The job also includes Providing, laying and fitting of 6mm2 three core multistrand PVC submersible copper cable approximately 200 meters in length duly crimped complete with thimbling & insulation work. Job covers providing and fitting of 63 ampere MCCB-1no. of 50KA breaking strength inside the pump room. Testing and commissioning of pump set after making electrical connection with main switch, power cables and LT control panel with submersible cable, The job includes cost of material, labour, hire charges of tools and tackles, manual/mechanical carriage.(Complete job)
Design fabrication providing installation testing and commission of 50 Amp, 415 V, 3 phase LT Control Panel cum Star delta auto starter complete with protection and safety mechanism, inside the pump room for pumping unit of bore well .The complete system should be enclosed in MS steel enclosure box of suitable dimensions. Providing and fitting of 1no. Voltmeter (0-500V) and 1no. Ampere meter (0-100 ampere). The internal wiring should be done with flexible PVC LT Cable with proper thimbling at each end. The system should trip the motor on power failure and on appearance of any electrical fault mentioned below which may otherwise damage the motor fields coils. Thus providing protection to the motor, 1. Low voltage below 350V, 2. High voltage above 450V ,3. Single phasing, 4.Reverse phasing, Unbalanced phasing in addition to the system shall have separate LED fault indicators, LED phase indicators isolation/by pass system/Siren audio warning system which activates on starter failure only/over load protection/ under Load protection. Testing of control Panel after making incoming and outgoing connection on load and then on full load. The job also includes Providing & fitting of 250 Amp main switch=01 no. Job also includes proper chemical earthing of the equipments. The job includes cost of material, labour, hire charges of tools and tackles, manual/mechanical carriage.(Complete job).
Providing, installation, testing and commissioning of 5000 GPH x 250 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each including 80mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no, gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 80mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 80mm dia and NRV 80mm dia along with by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate)gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 35mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length along with neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.
Making connection of Sump outlet pipe with suction lines through 100mm dia MS pipe manifold or direct. Making connection of delivery lines with rising main through 100mm dia MS pipe manifold. Job includes providing and fitting of bus bar arrangement complete with frame and insulation work on the wall of the pump room. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of 3 ton chain pulley block and maintenance tool kit as per enclosed annexure. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.
Providing, carriage, installation, testing and commissioning of 3 phase, 100 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber along with allied works (common for bore well and pump room stage zero) . Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of 3.5 core armoured Al. cable of 120mm2 from electric pole to 250 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 50mm2 copper cable from 250 ampere main switch to voltage stabilizer and further from voltage stabilizer upto Bus bars approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.
STAGE-1ST
Providing, installation, testing and commissioning of 5000 GPH x 220 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ (or as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each including 80mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, 80mm dia Cast Iron sluice valve-1no, gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 80mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 80mm dia and NRV 80mm dia along with by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate)gaskets, nuts, bolts, washers. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing / fitting and laying of copper cable 35mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50mm2 copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length along with neutral wire conforming to ISI standards with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength. Proper chemical earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.
Making connection of Sump outlet pipe with suction lines through 100mm dia MS pipe manifold or direct. Making connection of delivery lines with rising main through 100mm dia MS pipe manifold. Job includes providing and fitting of bus bar arrangement complete with frame and insulation work on the wall of the pump room. Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house. Job includes providing of 3 ton chain pulley block and maintenance tool kit as per enclosed annexure. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handling equipment etc.
Providing, carriage, installation, testing and commissioning of 3 phase, 100 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber along with allied works (common for bore well and pump room stage zero) . Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of 3.5 core armoured Al. cable of 120mm2 from electric pole to 250 ampere main switch in four leads approximately 50 meters length of each lead and further Providing and fitting of 50mm2 copper cable from 250 ampere main switch to voltage stabilizer and further from voltage stabilizer upto Bus bars approximately 20 meters in length complete with insulation and thimbling. The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .