Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹45.5 L+₹3.3 L (7.93%)Rejected-Finance NO 14 M C RAJA STREET MITTANAMALLI I A F AVADI CHENNAI 600 055 | CHENNAI | CHENNAI | TAMIL NADU | 600055 | L2 | Rejected-Finance Being other than lowest tenderer | |
| 3 | L3₹46.0 L+₹3.8 L (8.99%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest tenderer | |
| 4 | L4₹46.8 L+₹4.6 L (10.9%)Rejected-Finance 2165 1ST STREET L BLOCK 12TH MAIN ROAD ANNA NAGAR WEST CHENNAI 600040 | CHENNAI | CHENNAI | TAMIL NADU | 600040 | L4 | Rejected-Finance Being other than lowest tenderer | |
| 5 | L5₹47.8 L+₹5.6 L (13.3%)Rejected-Finance NO 15 PULAVAR GOVINDAN STREET GANDHI NAGAR AVADI CHENNAI 600 054 | AVADI | CHENNAI | TAMIL NADU | 600054 | L5 | Rejected-Finance Being other than lowest tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
15 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri. Narinder Singh, IDSE, SE(SAG)
COMMANDER WORKS ENGINEERS CHENNAI PALLAVAN SALAI CHENNAI 600 002
87667E8 IMPROVEMENT TO OFFICER MESS AND ALLIED WORKS AT AF STN UNDER GE AVADI CHENNAI.
2022_MES_525330_1
87667E8
Open Tender
Civil Works
Item Rate
180 days
AVADI CHENNAI
As per NIT
9 documents required · 9 mandatory
₹500
Yes
GE AVADI CHENNAI
₹90,000
Yes
21 Jul 2022
20 May 2022
22 Jun 2022
20 May 2022
15 Jun 2022
3 Jun 2022
20 May 2022 - 27 May 2022
Amount
BOQ UPLOADED ON 20 MAY 2022
SCH "A" PART-I (CIVIL WORKS)
Dismantling of stone slabs / tiles of any description or thickness in floors or vertical surfaces, laid, bedded and pointed in any mortar including bedding screed and backing in vertical surfaces and removal of unserviceable debris out of MD land complete all as specified and as directed.
Demolition of stone slabs / tiles of any description or thickness in floors or vertical surfaces, as in ceramic tiles laid, bedded and pointed in any mortar including bedding screed and backing in vertical surfaces and removal of unserviceable debris out of MD land complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.,) or insulation boards / slabs / blankets any thickness including cover fillets and framework and removing from site under Sch of credit complete all as specified and as directed.
Dismantling existing water tanks, exceeding 250 litres and not exceeding 500 litres, setting aside, (or lowering if required) for repairs cleaning etc., and hoisting if required reconnecting and refixing in position complete all as specified and as directed.
Refixing shall be done after laying of WPT.
Dismantling existing water tanks, exceeding 500 litres and not exceeding 1000 litres, setting aside, (or lowering if required) for repairs cleaning etc., and hoisting if required reconnecting and refixing in position complete all as specified and as directed.
Refixing shall be done after laying of WPT.
Reinforced cement concrete, 1:2:4, type B1, using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
Reinforcement shall be measured and paid separately as applicable.
Brickwork with fly ash bricks, old size, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of designation 50 complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, shelves and similar work not exceeding 200mm thick (horizontal or sloping) rough finished surfaces of concrete complete all as specified and as directed.
Tubular towel rail, brass chromium plated, 20mm dia, D type, 600mm long as in repairs between flanges complete all as specified and as directed.
Mild steel TMT bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed.
Mild steel TMT bars 6mm to 8mm, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and as directed.
Prelaminated particle board minimum 12mm thick, exterior grade, one side prelaminated with decorative choice lamination and other side balancing white as inserts in aluminium shutters / fixed partitions complete all as specified and as directed.
Figured glass, pin head type, 5mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed.
Anodised aluminium frame for doors, windows, ventilators with one or more rebates including ioining cleat for fixing etc. complete all as specified and as directed.
Anodised aluminium sections as in styles and rails and handle of aluminium door / window shutters, except fixing complete all as specified and as directed.
(a) Rubber packing, screws etc. as required shall be measured fixing of shutters.
(b) Glass or wire cloth as required shall be measured and paid separately.
Fixing only of aluminium door shutters, aluminium section weighing 0.55 kg / m, powder coated including necessary joining cleats, glazing clips, rubber neoprene packing, suitable handles of aluminium section 2 Nos in each door, hinges,anodised aluminium snap beading, screws etc., complete all as specified and as directed.
(a) All aluminium sections including snap beading, joining cleats, glazing cilps etc. shall be measured under aluminium shutters separately as supply only.
(b) Provision of AC opening to suit the location is deemed to be included in the rate quoted.
(c) Glass or wire cloth as required shall be measured and paid separately.
(d) The fixtures given are for shutter of approximate size 1.00m x 2.00m.
Fixing only aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary ioining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, and provision of anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.) , aluminum tower bolt 125mm (02 Nos) etc., complete all as specified and as directed.
(a) All aluminium sections including snap beading, joining cleats, glazing cilps etc. shall be measured under aluminium shutters separately as supply only.
(b) Glass or wire cloth as required shall be measured and paid separately.
(c) The fixtures given are for shutter of approximate size 0.50m x 1.50m.
Aluminium snap grid framework (anodised) of grid size 605mm x 605mm of main and cross tee of size 40mm x 25mm x 1.5mm thick and wall angle size 25mm x 25mm x 1.5mm thick for false ceiling including fixing of supporting hangers complete all as specified and as directed.
The hangers for support of false ceiling shall be measured and paid separately.
Hangers 6 mm dia. G.I. (hanging depth as per site condition) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long at intervals as per manufacturers instructions complete all as specified and as directed.
Glass reinforced gypsum tiles 12mm thick, of size 595mm x 595mm of pattern as approved by GE for insulation purpose fixed suitably on snap grid ceiling complete all as specified and as directed.
PVC insulation panels 10mm thick, with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M as approved by GE for insulation purpose fixed suitably on snap grid ceiling complete all as specified and as directed.
Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B-II (a) quality over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed.
Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B-II (a) quality over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed.
Non-skid ceramic coloured tiles, minimum 7mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match of superior finish, grade B-II (a) quality including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.
Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over cement screed 1:4, 20mm thick applied with cement slurry at the rate of 3 kg / sqm complete all as specified and as directed.
Vitrified ceramic coloured tiles, light shade, 10mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.
Glazed ceramic tiles of grade B-III coloured of size 300mm x 200mm, minimum 7mm thick in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.
Glazed ceramic tiles of grade B-III coloured of size 450mm x 350mm, minimum 7mm thick in vertical surfaces such as skirting, dados, risers etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including a backing coat of cement mortar 1:3. 10mm thick complete all as specified and as directed.
Machine cut, polished, kota stone slab flooring as in staircase treads, landing etc., 20-25mm thick laid over cement screed base in CM 1:3, 20mm thick, laid and jointed with grey cement slurry at the rate of 4 kg per sqm, mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Granite (of any type) work, of thickness 18mm to 20mm, (table rubbed and polished) in wash basin platforms, cooking platforms, steps, jambs, pillars, windows and the like set in cement mortar 1:4, 20mm thick, including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and as directed.
Rendering 10mm thick in CM(1:6) on fair faces of brickwork or concrete surfaces as in walls finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 10mm thick in CM(1:6) with a top coat of rendering 5mm thick in CM(1:4) mixed with liquid water proofing compound on fair faces of brickwork or concrete surfaces as in walls finished fair and even without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound shall be measured and paid separately.
Preparing newly plastered surfaces of wall, applying two coats of distemper oil emulsion white or tinted including in narrow widths, bands, cornices, pilasters etc., over a coat of alkali resistant priming paint over wall care putty 3mm thick, complete all as specified and as directed
Preparing newly plastered surfaces of wall,, applying two coats of cement paint over a coat of primer to match with the existing adjoining surfaces including in narrow widths, bands, cornices, pilasters etc., complete all as specified and as directed
Sheet glass, 3mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed.
Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 40mm-690gms) bore of pipe 20mm as in repairs complete all as specified and as directed.
Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 40mm-690gms) bore of pipe 25mm as in repairs complete all as specified and as directed.
Bib tap, two way, brass, chromium plated, with flange screwed for iron pipe. as in repairs, bore of pipe 15mm complete all as specified and as directed.
Make shall be of Prayag Cat No. Waves 8312 or equivalent of makes listed here-in-after.
Wall mixer brass, chromium plated, 3-in-1, with provision for over head shower and hand shower for mixing of hot and cold water screwed for iron pipe as in repairs bore of pipe 15mm complete all as specified and as directed.
Make shall be of Prayag Cat No. Octavia Series 9980 or equivalent of makes listed here-in-after.
Vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) and including fixing of the following components viz. pedestal pan with "P" or "S" trap, seat and cover for pedestal pan, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper as in repairs fixed complete all as specified and as directed.
Flushing cistern, flush pipe, seat cover, P trap, WC connector, as required shall be measured and paid for under supply only separately.
Vitreous china squatting pan, "Orissa" pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including fixing of the following components viz. squatt pattern pan with loose cast iron or vitreous chinaware, "P" or "S" trap, seat, flushing cistern, brackets, chain and pull or lever handle, flushing pipe including jointing to socket of flushing rim and connecting pipe to union of flushing cistern, inlet and overflow pipe, anti-syphonage pipe or stopper, setting the trap in and pan in lime concrete, 150mm minimum thickness and finished just below level of rim of pan to receive floor finishing as in repairs complete all as specified and as directed.
Flushing cistern and flush pipe as required shall be measured and paid for under supply only separately.
Supply only PVC valveless, syphonic action type flushing cistern 10 litres capacity low level, white with inlet, ball valve, float and handle / push button, including brackets complete all as specified and as directed.
Supply only flush pipe of polyethylene of high density, 32mm dia for low level / high level flushing cistern complete all as specified and as directed.
Supply only of plastic water closet seat, white, complete all as specified and as directed.
Make shall be of Prayag Cat No. 513, Standard Series or equivalent of makes listed here-in-after.
PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
Vitreous china wash basin, white, flat back, size 580mm x 450mm excluding taps, waste fitting, but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe as in repairs complete all as specified and as directed.
(a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately.
(b) Supply and waste pipes as required shall be measured and paid for separately.
Supply only pillar taps, cast copper alloy, swan neck type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of bore of pipe 15mm complete all as specified and as directed.
Make shall be of Prayag Cat No. Octavia Series 9914 or equivalent of makes listed here-in-after.
Supply only waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and as directed.
Make shall be of Prayag Cat No. Droplet Series BEA-10S or equivalent of makes listed here-in-after.
PVC waste pipes, 32mm bore of pipe, with polyethylene thread union and check nuts, fixed to walls as in waste pipe in wash basin complete all as specified and as directed.
Make shall be of Prayag Cat No.327 or equivalent of makes listed here-in-after.
PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
PVC connections 15mm size with PTMT nuts of length 450mm as in repairs complete all as specified and as directed.
Chromium plated ABS shower rose 105mm size with or without swivel joints, with brass CP 300mm arm including fixing to steel pipe or union as in repairs complete all as specified and as directed.
Make shall be of Prayag Cat No. Cascade Series BOS-32 (Shower) and BOS-47 (Arm) or equivalent of makes listed here-in-after.
Hand Shower ABS Multi Flow with 1.5m, stainless steel flexible tube and hook suitable to fix to mixer or any other location as in repairs complete all as specified and as directed.
Make shall be of Prayag Cat No. BHS-90 or equivalent of makes listed here-in-after.
Health faucet, chromium plated, 2 in 1, suitable for 15mm bore of pipe with SS tube length 1000mm, wall hook, water shower gun, washers, connections, brass union etc., as in repairs complete all as specified and as directed.
Make shall be of Prayag Cat No. BEA-97 or equivalent of makes listed here-in-after.
Toilet cabinet PVC body of size 350mm x 450mm (approximate) with shelf assembly, mirror mounted as shutter as in repairs complete all as specified and as directed.
Make shall be of Prayag Cat No.551 or equivalent of makes listed here-in-after.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 75mm including taking down existing pipes complete all as specified and as directed.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 110mm including taking down existing pipes complete all as specified and as directed.
PVC (SWR) bend any radius of bore 75mm complete all as specified and as directed.
PVC (SWR) bend any radius of bore 110mm complete all as specified and as directed.
Chipping of loose concrete and broken plastering plastering from chajjas soffits, fins, fascias and applying one coat of rust remover to reinforcement followed by concrete bonding agent to whole exposed face and rendering 20mm thick in CM 1:4, in two coats (10mm thickness each) complete all as specified and as directed.
(a) The rate quoted is deemed to include for rust remover and bonding agent and measured unit shall be for rendering in two coats (i.e 20mm thick).
(b) The rust remover and bonding agent shall of brands SIKA RUST OFF 100 and SIKA ARMATEC 110 EPOCEM respectively of SIKA firm or equivalent of makes listed here-in-after.
Galvanised chicken mesh, 12mm aperture, 25 SWG and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed as in lathing complete all as specified and as directed.
Complete removal of existing water proofing treatment including water proofing plaster, cement mortar screed etc., and demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal of unserviceable debris out of MD land complete all as specified and as directed
The entire thickness including the water proofing treatment shall be measured in cubical content.
Plain cement concrete, 1:2:4, type B0, using 12.50mm graded stone aggregate, averaging 25mm thick mixed with liquid water proofing compound as in levelling course, finished fair and even complete all as specified and as directed.
Supply only liquid water proofing compound shall be measured and paid separately.
Rendering 10mm thick in CM(1:3) over levelling course when the concrete is green, mixed with liquid water proofing compound and finished even and smooth without using extra cement complete all as specified and as directed.
Supply only liquid water proofing compound shall be measured and paid separately.
Preparing the rendered surface thoroughly to remove all loose particles, dirt / dust particles and applying a uniform coat of blown grade bitumen VG-10 @ 1.20 kg/sqm conforming to IS 702 over a coat of bitumen primer @ 0.40 Litres / Sqm followed by APP membrane reinforced with polyster non woven fabric 3mm thick weighing not less than 3.6 kg / sqm laid on primed surface by forced application followed by a finishing coat of solar reflective aluminium paint @ 0.10 litres / Sqm complete all as specified and as directed. complete all as specified and as directed.
For detailed specifications please refer particular specifications and list of manufacturers given here-in-after and the rate quoted shall include for the same.
Supply only Liquid Water proofing compound all as specified and as directed.
SAMYDOSS CONSTRUCTIONS
RKRISHNANANDSONS
power links
D Subramani and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .