SPECIAL REPAIRS TO B/R AND E/M WORKS TO BUILDING NO. T-1055 AT MILITARY STATION SRI GANGANAGAR

Amount

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by Engineer-in-Charge

Removal of excavated material to a distance not exceeding 50m and deposited where directed at level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge

M & L for PCC 1:4:8 type, D2 (40mm graded stone agg.) as in mass concrete complete all as specified and directed by Engineer-in-Charge

M&L for Damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4 , type B0 40 mm thick including necessary formwork complete all as specified and directed by Engineer-in-Charge

M & L for brick work with Fly ash bricks, straight or curved on plan exe 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge

M&L for M-25 Reinfoced cement concrete using 20mm graded stone aggregate as seismic and other similar bands, bed blocks etc complete all as specified including use of necessary form work and weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge

M&L for use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beans, sides and sofits (if any) of foundations and plinth beams and similar works vertical or to batter complete all as specified and directed by Engineer-in-Charge

M&L TMT bars as in reinforcement Fe-500D 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for cols, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia using TMT bars complete all as specified and directed by Engineer-in-Charge

All as per Srl item No. 9 here in before but 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and directed by Engineer-in-Charge

M&L for 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M&L for 15mm thick rendering in cement mortar 1:6 on other than fair faces of brick or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surfaces and applying two coat of Apex (weather coat) over a coat of alkali resistant primer on wall surfaces complete all as specified and directed by Engineer-in-Charge

M&L for two coats of distemper oil emulsion over a coat of putty to newly plastered wall surfaces including preparation of surface complete all as specified and directed by Engineer-in-Charge

Dismantling AC corrugated sheets in roof coverings and ridges complete all as specified and directed by Engineer-in-Charge

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern coverings complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge

Demolition of brick work built in cement mortar of any description complete all as specified and directed by Engineer-in-Charge

Dismantling cast iron work of any description complete all as specified and directed by Engineer-in-Charge

Dismantling for floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge

Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar, aprons etc. complete all as specified and directed by Engineer-in-Charge

Taking down of cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof ridges fixed with self tapping screws as specified in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) complete all as specified and directed by Engineer-in-Charge

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding including bent to shape on canopy fixed complete all as specified and directed by Engineer-in-Charge

S&F for PVC False Ceiling consisting of 600mmx600mmx6mm thick plain PVC Sheet Used as panel insert in a framework made using powder coated aluminium T-Section of Sizes (25mmx25mmx1mm thick) in square pattern of grid Sizes of (600mmx600mm) The Aluminium frame work is supported from the ceiling with the help of GI wire/6mm MS Rods of required sizes to maintain proper level etc. the aluminium frame work is Supported on the wall side with Use of aluminium L section of Size (25mmx25mmx2mm thick) angles etc. complete all as specified and directed by Engineer-in-Charge

S&F for Mild steel work such as Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge

S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed by Engineer-in-Charge

M&L for two coats of synthetic enamel paint over a coat of red oxide on steel surface over 10 cm width or girth, not otherwise described including preparation of new surface complete all as specified and directed by Engineer-in-Charge

M&L for two coats of oil distempering over old decorated surfaces of wall putty after complete removal of existing treatment including preparation of surface complete all as specified and directed by Engineer-in-Charge

M&L for two coats of Apex (weather coat) over primer on old decorated surfaces of walls after complete removal of existing treatment including preparation of surface complete all as specified and directed by Engineer-in-Charge

M&L for glazed ceramic tiles in vertical surface 600X300X7mm thick set & jointed in neat cement slurry & pointed in coloured cement to match with tiles as in skirting, dado etc. including 10mm rendering in CM (1:3) to received the tiles complete all as specified and directed by Engineer-in-Charge

M&L for Vitrified tiles 10mm thick (Square/ rectangular) polished, area of each tiles exc 0.36 sqm but n.exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm of screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge

M&L for glazed coloured ceramic tiles in vertical surface Dholpur pattern (300x600) and jointed in neat cement slurry and pointed in white or colour cement to match with tiles including 10mm thick rendering in cement mortar 1:3 to received the times complete all as specified and directed by Engineer-in-Charge

M&L for 25mm thick cement concrete flooring type B1, 1:2:4 using 20 mm graded aggregate finished even and fair complete all as specified and directed by Engineer-in-Charge

M&L for machine cut mirror polished kota stone slabs as in vertical surfces such as risers of steps, skirtings etc. 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete including acking coat 10 mm thick in CM (1:4) complete all as specified and directed by Engineer-in-Charge

M&L for hand cut mirror polished kota stone slab flooring 20mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete including screed bed of mortar 20mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge

Taking down Chowkhats or frames not exc. 1.5 sq.m eachwith shutters ( without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed by Engineer-in-Charge

Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work with CM (1:4) complete all as specified and directed by Engineer-in-Charge

M&L for anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed by Engineer-in-Charge

S&F in repair anodised powder coated aluminium doors shutters aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engineer-in-Charge

S&F in repair anodised powder coated aluminium windows and ventilator shutters, with aluminium grill side hung type, without sash bars aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engineer-in-Charge

S&F for Fibreways Brand Fiber Glass Reinforced plastic (FRP) Door Frames of three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30 mm thickness. The laminate door frame molded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiberglass from all sides. M S Stay shall be provieded at the bottom to steady the frame complete all as specified and directed by Engineer-in-Charge

S&F for Fibreways Brand 30mm thick Glass Fiber Reinforced Plastic (FRP) Paneled door shutter of required coloured and approved brand and manufacture,made with fibre retardant grade unsaturated polyster resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings,cast monolithically with 5mm thick FRP Laminate for panels and conforming tp IS 14856-2000 complete all as specified and directed by Engineer-in-Charge

S&F for 200mm long aluminium, anodized barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge

S&F for 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed by Engineer-in-Charge

S&F for 100 mm mild steel cold rolled butt hinges and fixed complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutter or rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. complete all as specified and directed by Engineer-in-Charge

S&F for 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to wall with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 complete all as specified and directed by Engineer-in-Charge

S&F for 110mm bore Door type PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge

S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engineer-in-Charge

S&F for Steel door including projecting type hinges, steel handle, complete, without glazing bars, dovetailed or welded with sliding door bolt (1 No) complete all as specified and directed by Engineer-in-Charge

Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire sta-ples complete all as specified and directed by Engineer-in-Charge

Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed Aluminium body ( extruded section ) body complete all as specified and directed by Engineer-in-Charge

Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

M&L for for Second class Hard wood in scantlings timber framed and fixed in cup boards complete all as specified and directed by Engineer-in-Charge

S&F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber / frame work complete all as specified and directed by Engineer-in-Charge

M&L for two coats of synthetic enamel paint over a coat of pink primer on new surfaces of wooden and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass of any description, from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-Charge

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge

S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed by Engineer-in-Charge

Taking down carefully aluminium/copper point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc ccomplete all as specified and directed by Engineer-in-Charge

M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes suitable length and thickness for mounting, switches, sockets,fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No -68 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer-in-Charge

All as per Srl item No -68 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 68 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 68 here in before but for call bell point complete all as specified and directed by Engineer - in - Charge.

S & F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

S & F switch socket combination 5 pin, type 5/6 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F switch socket combination 6 Pin, 5/16 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & Fbell push flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer - in - Charge.

Supply and fix Industrial socket metal clad plug and socket with MCBs double pole for Airconditioners complete all as specified and directed by Engineer-in-Charge

S & F Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engineer - in - Charge.

S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S & F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.

S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.

Supply and fix Recess mounting LED luminaire White powder coated CRCA housing with LEDs. Seamless front frame with flat white high transmission acrylic cover and fixed electronic driver (surge protecter) complete all as specified and directed by Engineer-in-Charge

S & F in replacement of existing light fitting with LED batten integrated channel 22 watt having input voltage AC90-300V, 50 Hz , 6500K ,extruded aluminum body with white acrylic cover tube light fitting wall mounted complete with rod, driver and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in - Charge.

S & F stepped type,single socket fan regulator not less than 400 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in - Charge

S & F in repairs sheet metal enclosure for double door BD made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked, 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTPN 4 ways, 415 Volts, ISI Marked 125 Amps bus bar stove enameled dust and vermin proof IP:43 protection suitable for incorporation FP MCCB (V-Tech) N1 frame upto 125 Amps and isolators etc including fixing in Wall with Cement mortar complete all as specified and directed by Engineer - in - Charge.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S & F in repairs MCB ‘B’ series type suitable for 240 volts, AC supply 5 to 40 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in - Charge.

S&F MCCB TPN 63 Amps with breaking capcity 25kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge.

S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in concealed PVC conduict dia 20mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed by Engineer - in - Charge.

Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level earth lead 4 mm dia along with GI pipe 20mm dia from plate to pannel board by means of bolts , nuts, check nuts and washers of GI all as shown electrical plate No -5 including alternate layer of charcoal dust and salt around the electrode and excavation , earth work, watering arrangement , funnel and wiremesh , 20mm GI pipe used for watering with iron funnel etc. complete all as specified and directed by Engineer-in-Charge

S&F security light fitting LED TYPE 25 watt of with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge

Supply and lay jointing and testing and commissioning in replacement of 95 Sqmmx3.5 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade complete all as specified and directed by Engineer-in-Charge

Supply and lay jointing and testing and commissioning in replacement of 25Sqmmx 4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning with dry and clean fine river sand for undergound cable 8cm before laying cable and 15cm after laying and punned to 18cm after laying of cable complete all as specified and directed by Engineer-in-Charge.

Suppy and laying well burnt clay brick old size sub class 'B' laid dry flat for protection over the cable width equal to the length of cable complete all as specified and directed by Engineer-in-Carge

Earthing complete with GI earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of plate not less than 1.5 Mtr ground level using galvanized iron strip 32mm x 6mm as earthing lead alongwith GI pipe 20mm dia from plate to panel to panel board by means of bolts, nuts, check nuts and washers of GI all as shown on electrical plate No. 5 inculding alternate layer of charcoal dust and salt around the electrode and excavtion, earth work, watering arrangement, funnel and wire mesh, 20mm GI pipe used for watering with iron funnel etc. complete all as specified and directed by Engineer-in-Charge

Taking down fan, sealing cable end, dismantling blades and removing fan blades and deposit safely in E&M store yard complete all as specified and directed by Engineer-in-Charge.

Fixing only ceiling fans including cable complete all as specified and directed by Engineer-in-Charge Note : Ceiling Fans shall be issued under Schedule 'B' free for fixing only -------------------------------------------------------------------------------------------------------------- Note : A sum of Rs. 96,967.50 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 27 & 28(R) (Schedule of Credit) of Tender document

KHANNA CONSTRUCTIONS

M/S BUDHRAM BISHNOI

M/s Balvinder Singh Engineer and Contractors

Aggarwal brothers and company

M/S KARNI CONSTRUCTION COMPANY

RANDHIR AND COMPANY

J and P CONTRACTOR

Marwaha Builders