WELCOME MAINT AND REPAIR/MAINT OF B/R SERVICES AND REPAIRS/REPLACEMENT TO INTERNAL ELECTRICAL FITTINGS AND FIXTURES, REPAIR/SERVICING OF AC,GEYSERS AND CONNECTED MISC WORK AT JAMUNA BLDG (P-128) AT BM CAMP UNDER GE (I) (CGN) KOLKATA

Amount

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed.

Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm each complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles, with particle board core) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed.

S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed.

S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed.

S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S&F35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed.

S&F butt hinges, cast brass, with mild steel hinge pin, bright polished of size 100 mm complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed .

S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed .

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed,

S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed,

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.

Resecuring or easing & adjusting of shutters without taking down of shutters of any description exc 2.0 Sqm each complete all as specified and directed.

S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed including taking down old one.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsarea exceeding 1.5 sqm complete all as specified and directed.

S&F new sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 sqm in each pan all as specified and as directed.

S&F old sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 sqm in each pan all as specified and as directed.

S&Fin stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

S&Fin repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including down old one.

Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required ®

S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165

S&F in repair wall mixer, cast copper alloy, screwed down, high pressure (chromium plated) with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed including taking down old one. (Make: Jaquar FUS Wall Mix 3 in 1 -29281)

S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one

S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one.

S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one

S&F in repair tubular Towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed including taking down old one.

S&F in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed

M&L in rpair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed including taking down old one.

S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed including taking out old one.

S&F in repair chromium plated shower roses with swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed

S&F in repair chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one.

S&F in repair CP grating round of size 125mm dia with waste hole of approved design complete all as specified and as directed including taking out old one.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair 25mm dia Powder coated aluminium curtain rod with catrip type fixed on walls complete all as specified and directed including taking down old one.

S&F in repair 25mm dia Powder coated aluminium hooks/brackets fixed on walls complete all as specified and directed including taking down old one.

S&F in repair 15 mm dia basin mixer cast copper alloy, chromium plated, single lever, without popup waste, 450 mm braided hoses with capstan head, high pressure with long screwed shanks and fly nuts screwed for iron pipes, (Make : Jaquar Cat No - 5931)

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ect but excluding dressed stonework and precast concrete articles.

M&L brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM1:4 all as specified.

Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed.

M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L coloured printed glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar 1:4 brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06sqm but not exc 0.11 sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar 1:6 on floors for laying floor finish complete all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including rendering 10 mm thick in cement mortar 1:4 on wall for laying floor finish complete all as specified and as directed.

M&L PCC 1:2:4 type B1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed.

M&L for cleaning of aluminium window sliding channels oiling to roller, tightning to lock, hinges, rubber gasket etc all as specified and as directed.

M&L for oiling and greasing of rolling shutter of any size and any patterrn incl scrubbing down old greasing complete all as specified and as directed.

S&F in repairs Ball bearing for rolling shutters of suitable size all as specified and directed.

Taking down aluminium window/ventilator with side hung,top hung or fixed type, sliding shutter of any description.

S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, locking system etc complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD Mrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Dismantling of stone slabs & tiles of any description or thickness in floor, aprons etc. complete all as specified and as directed.

M&L Granite (of any type) slab, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed

S&F in repair anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jambs/cill complete all as specified and directed including taking down old one.

M&L in repair for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed.

S&F in repair PVC flush / waste pipe 32/40 mm dia 1150 mm long fixed to walls complete all as specified and as directed including taking down old one.

S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.

S&F in repair Ball valves high pressure of PTMT with PTMT arm & highdensity plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed including taking down old one.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed including taking down old one.

S&F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed including taking out old one.

S&F in repair vitreous china squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete all as specified and directed including taking out old one.

M&L points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downwardangle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Supplying and laying in repair of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipe.

M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed.

Taking up or down 15mm stee tubing and connections including cleaning for re fixing or removal to store all as specified and directed.

M&L Tubes, 'medium grade' 15mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking up or down 25mm stee tubing and connections including cleaning for re fixing or removal to store all as specified and directed.

M&L Tubes, 'medium grade'25mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.

S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 4th storey incl taking out old one

S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 5th to 8th storey incl taking out old one

S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 9th to 13th storey incl taking out old one

S&F in repair 100 mm dia CI branch piece double, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one.

S&F in repair 100 mm dia CI branch piece single, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one.

S&F inrepair cast iron bends 100mm bore of pipe (any radius ) with ducks foot or heel rest all as specified.

S&F in repair Cast iron floor trap 100 mm, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed including taking out old one.

S&F inrepair 100mm diameter of outlet cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified.

S&F PVC mirror cabinet of size 400 mm x 500 mm with mirror at front view fixed with brass screws and wooden / plastic cleat complete all as specified and directed. (Make :- Prayag, Cat No. 554 or equivalent)

S&F in repair stainless steel kitchen rack of sie 750mm x 750mm x 300mm with 4 shelf made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws complete all as specified and directed including taking out old one

M & L for one coats of distemper oil emulsion including preparation of old plastered surfaces of wall complete all as specified and as directed work upto 4th storied.

-ditto- all as per item No 1 but above 5th to 8th storied.

-ditto- all as per item No 1 but above 9th to 12th storied.

Complete removal of existing treatment Washing, rubbing down and stopping of distempered and painted surfaces providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and two coat of oil bond distemper complete all as specified and as directed.

M&L of old decorated plastered or unplastered surfaces of ceiling and applying one coat of oil emulsion distempler complete all as specified and as directed work upto 4th storied.

-ditto- all as per item No 5 but above 5th to 8th storied on ceiling

-ditto- all as per item No 5 but above 9th to 12th storied on ceiling

M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed for work upto 4 th storied.

Dismantling boarding, anydescription, fixed in any position with nails

M&L for veneered decorative plywood, grade 1, 12mm thick (with BWR resin) with decorative faces veneers on one faces, fixed with screws to timber frame work

S&F Decorative auto soft close steel hinges for upto 25mm thick door/kitchen cabinet etc complete all as specified and as directed.

S&F Brass handles, cast type, polished bright 100mm long complete, including taking down old one.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete, (including unscrewing from boards/outlet boxes fittings and fixtures such as switches, sockets,ceiling roses,lamp holders,brackets,ceiling fittings,bulk head fittings,tube light fittings and rfgulators,etc.) . removing materials off the site work and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for (concelaed) type point wiring including necessary chase cutting of wall for one light/fan/call bell point with 1.5 Sqmm (nominal area), PVC insulated, (FRLSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,copper cable multistraned conductor 1100 volts grade for earth continuity wire connecting to common earth dolly drawn through and including PVC conduit and making good the disturbed surfaces as per the existing complete all as specified and directed.( Note:A Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing.Separated cable for earthing and neutralto be used for each individule ckt from the distribution board (B) The Rate of point wiring includes the following :- (i) copper wire.(ii)PVC conduit with accessoreis.(ii) chase cutting.

All as per item no.02 above but for one three pin 5 Amp socket outlet on same board.

All as per item no.02 above but for one three pin 5 Amp socket outlet on independent board.

M&L point wiring surface type with 2.5 Sqmm (nominal area), PVC insulated, stranded single core unsheathed FR copper conductor cable 1100 Volts grade drawn through with and including PVC conduit/ PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling /surface/ concealed etc. with and including 2.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core FR copper cable as earth continuity wire connecting to common earth point including supply & fixing of 1.6 mm thick pressed mild steel terminal boxes of suitable size with 3 mm thick PVC / Plastic laminated sheet. top cover, suitable sizes of brass screws and washers etc. for mounting switches, sockets, regulators etc complete for three pin 15 Amp socket outlet on independent board complete all as specified and directed.

M & L for Concealed/casing caping as per site requirement with 2.5 sqmm (Nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor,1100 Volts grade, in and including PVC conduit medium duty (ISI Marked ) not less than 20mm dia with accessories such as bends, cross,elbow,tees etc of suitable size including continuos earth wire FRLS PVC insulated Unsheathed 2.5 Sq mm (nominal) copper multi-stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly for 16 amps socket complete all as specified and directed

M & L for Concealed/casing caping as per site requirement point wiring with 4.0 sqmm (Nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor,1100 Volts grade, in and including PVC conduit medium duty (ISI Marked ) not less than 20mm dia with accessories such as bends, cross,elbow,tees etc of suitable size including continuos earth wire FRLS PVC insulated Unsheathed 4.0 Sq mm (nominal) copper multi-stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly for 16 amps socket complete all as specified and directed

M&L Sub main wiring with two runs of 4.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FR copper conductor cable upto and including 1100 V grade drawn through concealed conduit fixed to walls / ceiling etc. complete including one run of 4.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one (Note :-(i) Two runs of 4.0 sqmm single core cable, one run of 4.0 sqmm earth continuity wire to be measured as one length). (ii) PVC conduit and necessary chase cuting with making the surface good is deemed to be incl in the quoted rate.

M&L Sub main wiring with two runs of 6.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FR copper conductor cable upto and including 1100 V grade drawn through concealed conduit fixed to walls / ceiling etc. complete including one run of 6.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one (Note :-(i) Two runs of 6.0 sqmm single core cable, one run of 6.0 sqmm earth continuity wire to be measured as one length). (ii) PVC conduit and necessary chase cuting with making the surface good is deemed to be incl in the quoted rate.

M&L Sub main wiring with two runs of 10.0 sqmm (Nominal area) single core PVC insulated stranded unsheathed FR copper conductor cable upto and including 1100 V grade drawn through concealed conduit fixed to walls / ceiling etc. complete including one run of 10.0 sqmm (nominal area) single core, PVC insulated stranded unsheathed FRLS copper conductor as earth wire and duly connected to common earth point complete all as specified and directed including taking down old one (Note :-(i) Two runs of 10.0 sqmm single core cable, one run of 10.0 sqmm earth continuity wire to be measured as one length). (ii) PVC conduit and necessary chase cuting with making the surface good is deemed to be incl in the quoted rate.

S&F bell multi music type complete all as specified and as directed.

M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, conforming to IS, complete all as specified and as directed.

S&F white cover plate with frame for Modular switch, 2 module complete all as specified and as directed.

S&F white cover plate with frame for Modular switch, 3 module complete all as specified and as directed.

S&F white cover plate with frame for Modular switch, 6 module complete all as specified and as directed.

S&F white cover plate with frame for Modular switch, 8 module complete all as specified and as directed.

Supply & fixing Modular metal flush box, 2 module complete all as specified and as directed.

Supply & fixing Modular metal flush box, 3 module complete all as specified and as directed.

Supply & fixing Modular metal flush box, 6 module complete all as specified and as directed.

Supply& fixing Modular metal flush box, 8 module complete all as specified and as directed.

S&F white blanking plate one module complete all as specified and directed.

Supply and fix ( sheet steel enclosure) SPN DBs, 8 way, double door for MCBs with din channel, Earth bar and neutral bar etc. complete all as specified and directed including taking down old one. Make Legrand /ABB/Schnieder.

Supply and fix sheet steel enclosure SPN DBs, 4 way, for MCBs with din channel, Earth bar and neutral bar, double door type complete all as specified and directed including taking down old one. Make Legrand/ ABB/Schnieder.

Supply and fix MCB SP 240V, 6-32 Amps capacity including taking down old one complete all as specified and directed. Make : Legrand / Schneider/GE

Supply and fix MCB SPN , 240V 32 Amps capacity including taking down old one complete all as specified and directed. Make : Legrand /ABB/Schnieder.

Supply and fix MCB SPN, 240V 40 Amps capacity including taking down old one complete all as specified and directed. Make : Legrand /ABB/Schnieder.

Supply and fix MCB SPN, 240V 63 Amps capacity including taking down old one complete all as specified and directed.

S & F metal flush box 4 Module for mounting starter / socket unit including necessary cutting in wall for fixing the box and making good the disterbed surfaces complete all as specified and directed. Make : Northwest

S & F white cover plate with frame for Modular metal flush box 4 module complete for mounting starter / socket unit complete all as specified and as directed. Make : Northwest.

S & F modular socket 6/16 Amps, 3/6 pin, 240 Volts, two modules complete all as specified and as directed. Make : Northwest

S & F single phase motor starter current rating 16.00 -25.00 Amps, 240 Volts, two modules complete all as specified and as directed. Make : Northwest.

S&F for Power unit 6M flush type with AC starter, 20Amps MCB & 20Amps Plug top with indicator, 6module plate including connection complete all as specified and as directed. Make : Northwest.

S & F metal box 6 Module for mounting power unit complete all as specified and as directed. Make : Northwest.

S & F switch piano, flush type, 5/6 Amps, 240 Volts, single pole, one way, conforming to IS complete all as specified and as directed including taking down old one.

S&F bell push flush type, 5 Amps 230 Volts complete all as specified and as directed including taking down old one.

S & F Switch socket combination 5 Pin, 6 Amps, 240 Volts, flush type multi-purpose, conforming to IS complete all as specified and as directed including taking down old one.

S & F Switch socket combination 6 Pin, 16/6 Amps, flush type, multipurpose, conforming to IS complete all as specified and as directed including taking down old one.

S & F stepped type electronic fan regulator flush type 100 W complete all as specified and directed including taking down old one.

M&L bell,AC 230 Volts single pole complete all as specified and as directed including taking down old one.

Supply , fix and connecting ceiling fan / exhaust fan capacitor of capacity 2.5 mfd complete all as specified and directed including taking down old one.

S & F modular switch 6 Amps, 240 Volts, single pole, one way, one module conforming to IS complete incl taking down old one, all as specified and as directed.

S & F modular switch 16 Amps, 240 Volts, single pole, one way, one module conforming to IS complete incl taking down old one, all as specified and as directed.

S & F modular socket 6 Amps, 5 pin, 240 Volts, two module conforming to IS complete incl taking down old one, all as specified and as directed.

S & F modular socket 6/16 Amps, 3 pin, 240 Volts, two modules conforming to IS complete incl taking down old one, all as specified and as directed.

S&F Modular bell push 10A, 1 module complete incl taking down old one, all as specified and as directed.

S&F Modular fan step regulator, 2 modules complete incl taking down old one, all as specified and as directed.(As per sample)

Supply and fixing LED BLDG security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and Fixing of Recessed Surface Mounted Round slim & Elegant LED 15 watt 230 V AC Downlight made of aluminium PDC housing for indoor applications with high asthetic appeal for uniform light.

Supply & Fix in Surface mounted indoor decorative 1x1 LED luminaire,18 watt suitable for Gypsum ceiling, complete and connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including taking down old one.complete all as specified and as directed. Make- Crompton/ Bajaj/phiilips/surya

M & L for 1x10 watt LED Celing/wall mounted lightining fixture with lamp Lumen not less than 100 lum/watt polycarbonate,enviormental friendly,energy efficient fixed to wall/ceiling & connecting from ceiling rose to fitting terminal complete allas specified and as directed by Engr -in-charge including taking down old one.

M & L for 1x20 watt LED Celing/wall mounted lightining fixture with lamp Lumen not less than 100 lum/watt polycarbonate,enviormental friendly,energy efficient fixed to wall/ceiling & connecting from ceiling rose to fitting terminal complete allas specified and as directed by Engr -in-charge including taking down old one.

S and F LED bulb type 9 watt in warm white /natural white complete all as specified and as directed including taking down old unserviceable one.( Make: Havells/Philips/Bajaj)

Supply & fixing MCCB 63Amps,10 KA ,4 pole,415 volts,50 Hz,having thermal setting range 70% to 100% and fixed magnetic setting and break capacity 10 KA incld making incoming and outgoing connection after (Make- Legrand/ Schneider/ L&T) taking down old one complete all as specified and as directed.

Supply & fixing MCCB 100 Amps,36 KA ,4 pole,415 volts,50 Hz,having thermal setting range 70% to 100% and fixed magnetic setting and break capacity 35 KA incld making incoming and outgoing connection after (Make- Legrand/ Schneider/ L&T) taking down old one complete all as specified and as directed.

Supply & fixing MCCB 125 Amps,36 KA ,4 pole,415 volts,50 Hz,having thermal setting range 70% to 100% and fixed magnetic setting and break capacity 35 KA incld making incoming and outgoing connection after (Make- Legrand/ Schneider/ L&T) taking down old one complete all as specified and as directed.

Supply & fixing MCCB 400 Amps,36 KA, 4 pole,415 volts,50 Hz,having thermal setting range 70% to 100% and fixed magnetic setting and break capacity 36 KA incld making incoming and outgoing connection after (Make- Legrand/ Schneider/ L&T) taking down old one complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron or steel earth lead MS flat 25 x 4 mm by means of nuts, bolts, check nuts and washers of galvanised iron or steel, earth wire protected by galvanised iron pipe 50 mm dia (light grade) and connected to main switch board or main control panel as directed and as specified including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 5 cm thick of size as shown reinforced with 8 mm dia TMT / deformed bars 100 mm c/c both ways including one handle made of 12 mm dia MS bars of length 500 mm, funnel, wiremesh 20 mm bore galvanised iron pipe medium grade for watering, charcoal and salt in alternate layers including necessary earth work complete all as shown in elect plate No. 3 of SSR Part I, all as directed.

Taking down repairable exhaust fan of any size/sweep from existing position including taking down old connections wire complete all as directed and keep in safe custody for repairs and refixing the same on the same / different location with provision of new flexiable wire including cleaning of external surfaces & servicing the fan by dismantling complete greasing oiling and replacement of unserviceable parts as complete all as specified & directed Note :- Any parts needed to be replaced for satisfactorily running of exhaust fan shall be measured and paid separately under appropriate items.

S and F Louver for Exhaust fan of existing type including taking down old one all as specified and as directed.

Supply only Ball bearing suitable for exhaust fan of any sweep all as specified and as directed.

M&L for painting to exhaust fan of any sweep complete with synthetic enamel paint by spraying including filling cavities with fillar including necessary preparation of surface including refixing the same at site complete all as directed.

M&L for painting to ceiling fan of any sweep complete with synthetic enamel paint by spraying including filling cavities with fillar with necessary preparation of surface including hanging the ceiling fan and connecting up complete all as directed.

Taking down repairable ceiling fan of any size/sweep from existing position including taking down old connections wire complete all as directed and keep in safe custody for repairs and refixing the same on the same / different location with provision of new flexiable wire including cleaning of external surfaces & servicing the fan by dismantling complete greasing oiling and replacement of unserviceable parts as complete all as specified & directed Note :- Any parts needed to be replaced for satisfactorily running of celing fan shall be measured and paid separately under appropriate items.

Supply only Ball bearing No 6201 (Make : TATA/SKF or equivalent)

Supply only Ball bearing No 6202 (Make : TATA/SKF or equivalent)

Supply only Rubber bush of size 1 1/2 " dia x 1" thick for ceiling fan

Supply only MS split pin size 2" x 1/8" for ceiling fan

Dismantling burnt winding of ceiling fan (any size/ sweep/make) and taking out existing winding wire, and rewinding the same after proper cleaning with super enamelled copper winding wire as per existing gauge and turn to achieve the required RPM, cleaning of bearings, bushes etc as required and testing complete for fan suitable to operate on 230 V, single phase, AC supply, permanent capacitor type complete all as specified and directed. Note :- Replacement of unserviceable parts shall be measured and paid separately as supply only under appropriate item of this schedule , however labour element involved is included in this item.

Dismantling of burnt motor of exhaust fan of size 225 mm to 350 mm sweep, 230 V, single phase, AC supply, permanent capacitor type, taking out existing winding and rewinding the same with super enamelled bare insulated copper winding wire as per existing gauge and turn to achieve required RPM and testing complete all as directed . Note :- Replacement of unserviceable parts shall be measured and paid separately as supply only under appropriate item of this schedule, however labour element involved is included in this item.

Taking down repairable geyser of size 15-25 ltr from existing position including taking down old connections connecting pipe/wire complete all as directed and keep in safe custody for repair and refixing the same on the same / different location with provision of frastnut(as reqd) incl cleaning of external surfaces & servicing the geyser complete and replacement of unserviceable parts complete all as specified & directed Note :- Any parts needed to be replaced for satisfactorily running of geyser shall be measured and paid separately under appropriate items.

Supply & fixing heating element 1000w- 2000watt, ISI marked for geyser of any make complete all as specified and directed including taking out old one.

Supply & fixing Thermostat switch of geyser 230 volts, 30 degree to 90 degree centrigate temp. range complete all as specified and directed including taking out old one.

Supply & fixing Indicating lamp set for geyser of any make complete all as specified and directed including taking out old one.

Supply & fixing pvc connection pipe set (pair) best quality of 600 mm long with brass screws for geyser of any make complete all as specified and directed including taking out old one.

S & F fusible plug of brass 15 mm bore suitable for any type geyser including taking down old one complete all as specified and directed.

S & F drain plug for wash out line made of brass suitable for any type geyser including taking down old one complete all as specified and directed.

S& F Air release valve 15 mm dia for geyser including taking down old one complete all as specified and directed.

M&L for painting to geyser of capacity 15-25 ltr, complete with synthetic enamel white paint by spraying including filling cavities with fillar with necessary preparation of surface including hanging the same or different position and connecting up complete all as directed.

M and L for painting of LT panel, feeder pilar boxes,sheet metal enclosure and any other steel surfaces complete with two coats of power coated paint, (1st quality) of approved colour by spraying after removing all dust/rust/grease including preparation of surface all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm as per existing size of holes complete all as specified and directed.

supply and fixing ceiling fan complete with blades down rods and accessories 230 volts 1200 mm sweep white colour (with remote) min air delivery 210-CFM with service value 6 BEE 5 star rated with brushless direct current motor (BLDC)complete all as specified and as directed.

S& F Aparture plate(as per sample) for geyser capacity 25ltr including taking down old one complete all as specified and directed.

S&F Plug top with indicator 16 A, including taking down old one complete all as specified and directed. Make : - North West/ Schneider/GE / Legrand

S & F electronic driver for LED surface light /spot light as per existing capacity including fitting complete all as specified and as directed including taking down old one

S&F indicator LED phase lamps 03 Nos. (R,Y,B) incl taking down old one complete all as specified and directed.

S & F Voltmeter 0-500 Volts digital type incl taking down old one complete all as specified and as directed.

S & F Ammeter 0-100 digital type incl taking down old one complete all as specified and as directed.

Repair/maintenance and fitment of existing water cooler /Refrigerator/RO Water Purifier of existing capacity including repair/replacement of spares/cartridge with proper cleaning of water storage space,cooling coil,supply and charging of refrigerent maintenance of Compressor etc for proper functioning complete all as specified and as directed.

Supply and fixing single phase KWh meter with LCD display,5-40A with box,including connection wire and grouting of nuts,bolts complete all as specified and directed.

M&L for rewinding of BLDC ceiling fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with super enamelled copper conductor of same gauge/same number of turns as that of existing and connecting the coil suitable to operate on 230 V, single phase, AC supply, permanent capacitor type, tying the winding and applying air drying the winding throughly and changing PCB of the fan (to be measured separately) and all as specified and directed.

S&F PCB of BLDC ceiling fan of any make/model/sweep/wattage all as specified and as directed.

Supply only remote of BLDC ceiling fan of any make/model/sweep/wattage all as specified and as directed.

M&L for cutting chases, Pinning in making good for concealed water tubeing and pointing with cement mortar 1:3 in brick or similar work not exc 10 cm width or girth

PUTUL CONSTRUCTION CO. (BID ID -3316841)

INDIA ELECTRICAL EQUIPMENTS (BID ID -3319702)

DGR CONSTRUCTION (BID ID -3317429)

M A ENTERPRISES (BID ID -3321348)

GAYATRI ENTERPRISE (BID ID -3318321)

M/S L.R.ENTERPRISES (BID ID -3317294)

KT CONSTRUCTIONS (BID ID -3318073)