GE/PNH-44/2024-25

Amount

B&R PORTION:- Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm , complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exc 4 Sqm, complete all as specified and directed.

S&F factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc. with one shop coat of primer complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer, complete all as specified and directed.

S&F butt hinges 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin anodised, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed.

S&F in repair 32 mm bore PVC flush pipe/waste pipe of polyethylene of low or high density, complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) complete all as specified and directed by Engineer-in-Charge.

S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be of two parts as upper part shall be of three movable shutter and lower part consist of three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specifications: - (i) Anodised aluminium frame section of size 101mm x 44mm x 1.5 mm thick made (ii) Three ways track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40x 18x 1mm thick. (iv) 4 mm thick glass superior quality. (v) IDPE Rubber gasket for fixing of glass. (vi) Locking cleats per shutter 01 No. (vii) Sliding rollers per shutter - 02 Nos. (vili） Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters (lx) fixing screw for frame with wall per windows- 08 Nos. Complete wiih all specifications and making good the adjacent side of jambs of windows by plastering in CM 1:3 even and smooth complete etc and shifting of existing cooler stannd eherever required at site and complete all as specified and as directed by Engr-in-charge.

S & F powder coated aluminium ventilator cross section conforming to IS specifications, aluminium frame of size 63.5x38.10x1.5mm consisting of two portions, upper portion shall have louves with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick headed glass with IDPE rubber gasket including aluminium beads, including making good the adjacent jambs with plastering all around in CM 1:3 finishing even and smooth complete all as specified and as directed by Engr-in-charge.

M&L for applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint of Ist quality to old steel or iron surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (450x300mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

M&L for Vitrified coloured ceramic tiles 8 to 9 mm thick (square/ rectangular) area of each tile exc 0.18Sqm but n exc. 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc. 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc. finished even & fair, complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor finished even & fair , complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in roof padding, complete all as specified and directed.

Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 with mixing of liquid water proofing admixture @ 200 ml/50 kg of cement and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick or finished concrete surface in ceiling in cement mortar 1:3 and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered / unplastered surface of wall and applying two coats of cement base paint over a coat of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of oil emulsion distemper over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatement from wall plaster and applying two coats of oil bound distemper white or any tint, over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying two coat of cement base paint, complete all as specified and directed.

M&L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling, complete all as specified and directed.

M&L for applying one coat of white wash including preparation of old plastered surfaces of ceiling, complete all as specified and directed.

Supply only liquid water proofing admixture complete all as specified and directed.

M&L for 300x300mmx25mm thick chequered cement concrete tiles set and jointed in neat cement slurry and pointed in white or coloured cement mixed with mixture of pigments to match with the colour of tiles laid over and including 15mm thick screed bed in CM (1:6), including demolition of existing floor tiles complete all as specified and as directed.

Taking up or down steel tubing of 15 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

S&F GI tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

S&F GI tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 'S' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. including lime concrete bedding, complete all as specified and directed.

S&F in repair PVC connection 15 mm bore with CP nuts of length 600 mm long, complete all as specified and as directed.

S&F in repair 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs screwed for iron pipe or brass ferrule and fixed, incl dismantling of existing water tank complete all as specified and as directed.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe complete all as specified and directed.

S&F in repair bib tap 15 mm bore with flange, Brass CP, with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop valves/cock cast copper alloy 15 mm dia, chromium plated with wall flange screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair stop valves/cock fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy 15 mm dia, chromium plated with wall flange screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair chromium plated shower rose 125 mm size, complete all as specified and directed.

S&F in repair sheet glass shelf assy connsist of 5.5 mm thick sheet glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers, complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm excluding taps, waste, chain & plug and porcelain stopper but exclusive of fixing of supply and waste pipe including cutting for and pinning in ends of brackets or erecting stand etc complete all as specified and directed.

S&F in repair PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed, complete all as specified.

S&F in repair PVC (SWR) pipes 75mm dia any length soil waste and vent pipe single socketed with rubber ring joint, laid in floor or trenches as soil pipe, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on brick surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified., complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces, complete all as specified and directed.

S&F MS door spring 300 mm long and incl roller place, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed by Engg-in-charge.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed by Engg-in-charge.

S&F Sheet glass ordinary quality, 5.5 mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed.

S&F in repair vitreous china urinals, half stall type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolt, flushing cistern and flushing pipe) complete all as specified and directed.

S&F in repairs PVC (EWC) seat cover white colour with flat bottom including CP hinges complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia vent cowl suitable for pipes, complete all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 110mm dia provided with access door, complete all as specified and directed.

S&F in repair PVC (SWR) branch piece of any radius 110mm dia single (single 'Y') equal or unequal, complete all as specified and directed.

S&F in repair PVC (SWR) branch piece of any radius 110mm dia double (double 'Y') equal or unequal, complete all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 75mm dia provided with access door, complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm bore vent cowl suitable for pipes, complete all as specified and directed.

S&F in repair 20mm dia ball brass valve high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4), complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered wall surfaces , and applying two coats of white wash on walls including cornices, pilasters etc, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for rendering 10 mm thick plaster in cement mortar 1:3 for laying sunken/roof treatment, with mixing of liquid water proofing admixture @ 200 ml/50 kg of cement and finished the surface even and smooth without using extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately

M&L for Plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base of sunkun portion/ floor finishing surface even and fair,complete all as specified and as directed.

M&L for Water proofing treatment to RCC sunken Slab complete all as specified and as directed by Engineer -in- Charge as per following:- (a) Cleaning the surface with wire brush / coir brush, removing lose material like dust particles, dirt etc. (b) Apply a coat of bitumen blown primer of grade 85/25 @ 1.2 kg per sqm (c) provide water proofing membrane of 3 mm thick hyper plus 3 kg/sqm with lap 10 cm on joints andtorching the joints (d) Apply second coat of two component modified polymer coating after 72 Hrs (e) Apply a coat of hot blown bitumen of grade 85/25 @ 1.2 kg per sqm over water proofing membrane. (f) Complete the treatment to be carried out by authorised applicator of water proofing manufacturer as per Make approved by E-in-c's branch.

Demolition or breaking up drain pipe (salt glazed ware, AC, PVC or reinforcement concrete) of any size, set in cement mortar/concrete, complete all as specified.

M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes for 150mm drain pipe after they are laid in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) & tested, complete all as specified and directed.

M&L for Salt glazed stoneware drain pipes of 150 mm bore grade A (6 kg/sqcm) laid in trenches and jointed as specified, complete all as specified and directed.

M&L for 18-20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and and moulding the edges, complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 94 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair switch piano flush type 16 Amp one way, (ISI marked), complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 6 pin, 6 & 16 Amps flush type universal, complete all as specified and directed.

S&F in repair Switch socket multipurpose combination 2 in 1, 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F in repair Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

S&F in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Supply and fixing in repair inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair decorative wall light fixture made up of poly carbonate with lamp holder incl inverter bulb of not less than 10 watt, complete all as specified and directed.

S&F in repair connecting and commissioning of street light fittings 25 watt LED, IP-66 prootection, single piece pressure die cast aluminium housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartment with high voltage surge protection device upto 5KV prewired including 1.6 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40mmx6mm with bolts, nuts and washers and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed.

Supply and fixing in repair LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed. Make:-Havells cat part No- DHMGCSNF040 - DHMGCSNF063 or Equivalent cat part of make as specified in P.S.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed. Make:-Havells cat part No-DHMGCSPF006-032 or Equivalent cat part of make as specified in P.S.

S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 16 Sqmm 2 core including taking down existing old service connection, complete all as specified and directed.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F in repair LED inverter LED bulb 9 watt incl all connected items, complete all as specified and directed.

S&F in replacement of exhaust fan of capacity 300 mm sweep, 1400 RPM, heavy duty, metallic body, incl connecting all accessories, including taking down old exhaust fan from site & deposit in MES store yard. complete all as specified and directed.

M&L for providing wall opening and grouting the nuts and bolts in wall for exhaust fan of size 300 mm sweep, complete all as specified and directed by Engr-in-Charge.

S&F in repair surface/wall mounted LED lights, 2 feet long with 10 W LED ready to use fittings, complete all as specified and directed by Engr-in-Charge.

VIKAS ENTERPRISES (BID ID -3135243)

M/S BHATT TRADERS (BID ID -3135024)