Loading…
Loading…
Tender Value
₹9.6 L
EMD Value
₹19,200
Closing Date
28 Jul 2026, 6:00 pm2d left
Executive Engineer
HPPWD JUBBAL
Sh Providing 15 mm cement plaster, P/F prepainted sheet in roof and fencing works etc
2026_PWD_139522_3
4458-61,17.07.2026
Open Tender
Civil Construction Goods
Percentage
Jubbal
Please refer Tender documents.
8 documents required · 8 mandatory
₹350
₹19,200
21 Jul 2026
21 Jul 2026
29 Jul 2026
21 Jul 2026
28 Jul 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations, trenches eti, in carth work it upto 1.50 antr honght, stacking the cacavated solent the clear from the edge of excavation and then returning the stacked in 15cm. (fifteen centimeter) thick layers, when required in to path, sades of fromations etc, tinh deputed layer by running and watering and then disponing of all surplus encarated earth as per direction of Engineer-in-charge within all | 3.89 | Per cubic metre | 490 | ₹1,906.1 |
| 2 | Providing and laying cement concrete of 1:4 :8. One cement four coarse sand. Eight graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering in all work upto plinth level inchiding all leads and lifts and carriage of materials and other incidentals. | 3.89 | Per cubic metre | 5,700 | ₹22,173 |
| 3 | 15 mm Cement plaster in single coat on the rough/far side of brick concrete stone walls 1.6 (1 cament 6 sand )for interior plastering upto for two level including arrises internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and frished even and smooth. | 246.24 | Sqm | 511 | ₹1,25,828.64 |
| 4 | Prowing andfixing0.6 0mm thick Preparted steel sheed roofing with hot dipped metallic zinc coated sheet with top coat of regularmodified polyer organic coated of 20 microns over 5 microns primer coating to back concluding vertical curved surface fred with polymer coated J or L hooks, bolts and nuts 6mm dia meter with prepainted impect and rubber washers complete all accesories as required as per the direction of Engineer-in-Charge | 140 | Sqm | 1,564 | ₹2,18,960 |
| 5 | Steel work welded in built up sections framed work, including cutting, hosting, fixing in position and applying a prming cost of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, leder, railings, brackets, gates and similar works. | 4,650.13 | Kg | 110 | ₹5,11,514.3 |
| 6 | Providing corrugated G.S. sheet .6.3mm thick not less than275gm/Sqm. | 93 | Sqm | 837.3 | ₹77,868.9 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
BOQ_206831.xls
BOQ • 0.23 MB
SBD.pdf
Tender Documents • 2.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].