PROVN OF 2 X STORE ROOM , ADDITIONAL ALTERATION OF BLDG NO H-3 HARDING ROAD AND PROVN OF TILING OF BLDG NO P-110 C COY, BLDG NO P-136 SP COY, BLDG NO P-146 MT OFFICE AND CERTAIN AREA UNDER AGE B R II OF GE I KANPUR

Amount

B&R Schedule

Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation, manholes, septic tanks well etc and getting out in soft/loose soil complete all as specified and directed.

M&L for anti-termite treatment (Pre Construction) treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for anti-termite treatment treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for anti-termite treatment treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (design mix) type M-25 (20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret and the like complete all as specified and directed. Note:- Form work and reinforcement shall be measured and paid separately.

M&L for reinforced cement concrete (design mix) type M-25 (20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. Note:- Form work and reinforcement shall be measured and paid separately.

M&L for reinforced cement concrete (design mix) type M-25 (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. Note:- Form work and reinforcement shall be measured and paid separately.

M&L for reinforced cement concrete (design mix) type M-25 (20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. Note:- Form work and reinforcement shall be measured and paid separately.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surfaces complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces complete all as specified and directed.

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

S&F of TMT bars 5 mm dia and over upto and including 10 mm dia, as in stirrups, spacers and binders, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary formwork as required and including mixing of integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated complete all as specified and directed. Note:-WPC will be measured and paid separately as supply only.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces or surfaces other than fair faces of brick work, finished fair and even complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

Supply only integral water proofing compond all as specified and as directed. Make : PIDIPROOF WL ( Dr fixit) or equivalent ISI marked make as approved by GE

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil to a distance not exc 50 Mt & depositing where directed at a level not exc 1.5 Mt above the starting point complete all as specified and directed.

M&L for broken brick hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base flooring complete all as specified and directed.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick screed bed or bedding layer in CM 1:6 finished even and rough all as specified and directed.

M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick screed bed or bedding layer in CM 1:4 finished even and rough all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges and providing 6 mm thick joints through the thickness of plinth protection duly filled with mastic filling of one part of hot bitumen 85/25 grade and three parts of fine sand (all by weight) complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar (1:4) on RCC roof or concrete surfaces mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L water proofing treatment to roof slab with APP modified polymeric membrane thickness not less than 3 mm plain finish (weight of membrane not less than 3.80 Kg +/- 5% per Sqm) and glass fibre reinforcement complete all as specified and directed by Engineer-in-Charge with following courses of descriptions below :-Make of membrane shall be SIKA/Super Thermolay APP (STP) / IWL as approved by GE (a) The surface of roof, parapet and gutters and drains mouth etc over which waterproofing treatment is to be applied shall be thoroughly cleaned of all foreign matter, moss dust etc by wire-brushing and dusting. For cast iron/PVC drains outlets a grove shall be cut around to tuck in the treatment. Concrete angles-fillets provided at junctions between roofs and verticals faces of walls (parapet and other walls) around obstacles such as pipe, chimney stacks etc and other similar situation to ease up about corners. (b) On the prepared surface one coat of Solvent based bituminous primer (Sika @ WP shield Primer or other techno commercially Equivalent make of STP/IWL ) shall be applied @ 0.35 to 0.50 Kg/sqm till the surface is properly impregnated. The time delay of laying of membrane after application of primer shall be as per manufacturer instructions

(c) Laying of polymeric waterproofing membrane and bonded completely to the substrate & the overlaps are then sealed /fused by flame torch as per manufacturer instructions. (d)The overlaps shall be of minimum 4 Inch (100 mm) on longitudinal direction and transverse direction and sealed by the flame-torch. (e) Special care is to be taken at singularities such as drains expansion-joints etc Note : The waterproofing work as specified in item No 34(a) to 34(d) has to be executed by the manufacturer / approved applicator of the manufacturer only. Approved applictator shall have min five years experience in respecive fields i.e. Water proofing treatment. (f) Applying .1 Ltr/Sqm of aluminium paint over APP membrane all as specified and directed. A MoU for waterproofing work as specified in item No 35.00 and 35.01 shall be executed between the contractor and the manufacturer / approved applicator of the manufacturer before start of the work and got approved by the GE in writing. Certificate of completion alongwith guarantee shall be submitted by the contractor for the waterproofing work.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.

S&F 35 mm thick (batten thickness) second class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

M&L small fitting such as bracket of any 2nd class HW as in cleat area exc 200cu cm & not exc 500 cucm including S&F 50mm cold rolled medium weight but hinges complete all as specified and directed.

S & F 50 mm size but hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F MS butt hinges 100mm medium weight, cold rolled and fixed complete all as specified and directed.

S&F 300 mm long aluminium anodised Sliding door bolt with haps, staple (bolt type)and fixing clips of sheet, cast or extruted section and fixing bolts and sliding bolts of extruted sections or cast-aluminium alloy all as specified and directed.

S&F 200 mm size Alu , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm Alu handles cast type complete all as specified and directed.

M&L Painting to wood and wood based surface of any description over 10cm width or girth including two coat of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface complete all as specified and directed.

S&F factory made steel tubular Steel window with side hung shutters including box type hinges with steel handle and stel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary pintal hinges locking arrengment if required complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat zink chrome red oxide primer complete all as specified and directed.

M & L For 100mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base of paver block

M & L for Machine pressed precast concrete interlocking paver block of 60mm thick any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over 40mm thick sand cusioning complete all as specified.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges including all necessary form work complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors, skirting etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM (1:4 ) complete all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Taking down existing shutter of any description without taking off shutters from frames, size exc 1 sm but n exc 2 Sqm and refixing in the same opening in serviceable condition to match with the existing surface complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm/160 mm bore pipes all as specified and as directed.

M&L salt glazed stone ware drain pipes grade ‘A’ laid in trenches and jointed as specified for 150 bore pipes all as specified and as directed. Note:- Excavation and earth work measured and paid separately.

M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landing, cover slab etc including necessary form work, set in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured and paid separately.

M&L cutting into existing manhole for connection of new drain pipe & removing existing drain pipe and cutting out branch channels and making good with packed spun yarn and cement mortar (1:1) for 150 mm bore pipe and making good with cement concrete type B1 1:2:4 20mm graded reforming benching all as specified and as directed.

M & L Providing RCC, Type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in lintel beams of door / window openings complete all as specified and directed.

Dismantling of Asbestos cement corrugated and semi corrugated sheets in roof covering complete all as specified and as directed.

M&L pre painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour having tensile strenth of 550 Mpa as in roof covering/ clading to wall fixed with screws complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, chajjas, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats holdfast etc fixed with hilti bolts of size 6x 100 mm grouted in slab and rafters as reqd on site complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work complete all as specified and directed.

Demolition of brick work built in Cement Mortar complete all as specified and as directed .

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 as in floors complete all as specified and directed.

M & L for glazed ceramic coloured tiles of size (450x300mm)x7 mm thick,laid on vertical surface such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set in cement to match the shade of tiles complete all as specified and directed.

M & L for Preparation of new wall surface and Applying 2 mm thick wall care putty , finished even and smooth,and applying two coat of oil bond distemper complete all as specified and directed. Make of wall care putty JK/Birla

M & L for GI tubing of medium grade 20 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.

M & L for GI tubing of medium grade 15 mm bore with all fittings and fixed to walls and ceiling or laid in floors, complete all as specified.

M & L for 15 mm bore central hole basin mixture , chromium plated, without popup waste system with 450mm longbbraided hoses pipe fixed in repair, complete all as directed.(Jaquar or equvalent)

S&F in repair Mirror cabinet (PTMT Alloyetc complete all as specified. Make Pryag or equivalent fixed in repair

S&F, health faucet with 1m SS tube and hook for water closet ,pedastal pattern fixed in repair complete all as specified and directed. Pryag Cat No-BEA-95 or equivalent as specified and approved by GE.

S&F oval counter type vitreous china wash hand basin of size 560x470 mm, white including waste coupling of PTMT 32 mm.complete all as specified and directed. Cera Cat No S2030104 or equivalent as specified and approved by GE.

S&F in repair 15mm Bip taps, cast copper alloy(chromium plated) with crutch handle or butter fly handle screwed down , screwed for iron pipe complete all as specified and directed. .(Jaquar or equvalent)

S&F 15mm Angle valves , cast copper alloy ,chromium plated ,screwed down high pressure with crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified .(Jaquar or equvalent)

S&F Conceled stop cock,15 mm bore, cast copper alloy ,chromium plated ,screwed down high pressure with crutch and butter fly handles , screwed both ends with for iron pipes or for union complete all as specified .(Jaquar or equvalent)

S & F in repair CP Two Way Bib cock with wall flange complete all as specified and directed. (Jaquar or equvalent)

M & L for cascade type China ware closet pedastal pattern of superior special colour including fixing bolts, Fushing cistern with twin flush fitting and sheet cover of same quality and colour complete all as specified and directed by Engg-inCharge.

S&F full Corner Glass 300mm ,chromium plated complete all as specified and directed. Pryag Cat No-BEA -52 or equivalent as specified and approved by GE.

S&F Toilet paper holder ,chromium plated , complete all as specified and directed. Pryag Cat No-BA-18 or equivalent as specified and approved by GE.

S&F Towel Rack ,chromium plated , complete all as specified and directed. Pryag Cat No-BA -12 or equivalent as specified and approved by GE.

S&F Front shelf , with frame,chromium plated ,fixed in repair,complete all as directed.

S&F. PVC connection 15 mm size with PTMT nuts of length 300 mm complete all as specified and directed.

M & L for wall mixer 3 in 1 (provision for over head shower & hand shower) fixed in repair, complete all as specified and directed.(Prayag cat part No-8580) or equivalent as specified and approved by GE.

S&F 125mm dia shower rose, Brass , chromium plated with swivel joint complete fixed in repair complete all as specified and directed.

S&Fin repair Soap dish , chromium plated , complete all as specified and directed . Pryag Cat No-BA-45 or equivalent as specified and approved by GE.

S&F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

Supply and fix 100 mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws complete all as specified and directed.

Supply and fixing 125 mm size aluminium handle febricated type anodised complete all as specified and directed.

S&F, Aluminium anodised barrel tower bolts, 200mm long , of extruded section and fixed complete all as specified and directed.

S&F, stainless steel curtain rods of 20mm dia as in doors/ windows pelmets with SS brackets fancy type , including screws and other necessary fitting for fixing brackets, SS Funnels for 20 mm dia curtain rods, fixed at each end of rods complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but n.exc full brick complete all as specified and directed.

S/F Solid PVC door frame (single rebated of size 60mm x30mm made out of solid PVC foam with homogeneous fine celluler structor havig smooth outer integral skin with suitable metal sttifner and fixed with 100x8mm sheet metalCSK scews complete all as specified and directed.

M& L Factory Made Solid PVC Moulded Door Shutters with partical board core 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, suppling & fixing in the frame at site as per specification & drawing.Make : Rajshree Plastiwood/Sintex as per approved by GE.

S&F in repair aluminum powder coated (powder coated required clour) three track sliding window frames of size 92 x 45.50 x 1.50mm thick and shutter frames of size 40 x 18 x 1.55mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket etc all as specified and as directed.

S & F in repairs Powder Coated aluminium ventilator frame and shutters, side hung type without sash bars, aluminium section weighing o.555 kg /m including necessary jointing cleats , glazing clips rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as pep stay 150 mm long(1No) hinges type b-21 100 mm long ( 2N0s) suitable handles( 1 No) including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average aperture and fixed with stainless stell wire staples and fixing 5mm thick tinted glass with necessary rubber beading gasket etc all as specified and as directed .

S&F, aluminium chequered grills as on aluminium windows, wight not less than 1.20 Kg/Sqm50 kg / sqm and fixed all as specified and directed.

Supply & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38-41%.The steel angle should be of “Armstrong” make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32 and 27mm and a load carrying capacity of 7.5 Kgs/Sqm. The T Sections have a Galvanizing of 90 grams per Sqm & passed through 500 hrs of Salt test ,Perimeter trim to be Armstrong wall angles of size 30x19x19mm, secured to walls at 450 mm maximum centre to centre hanging with 4 mm GI wire copmlete all as specified and directed according to manufacturers instruction and Complete including taking down od false ceiling all as specified and as directed .

Dismantling of structural steel work including doors gates but excluding truss etc.

S & F 2 mmthick Fibre glass reinforced translucent plain sheeting with two corrugation side lap fixed with coach screw and washer in gate/walll etc complete all as specified and directed..

S&F for 35 mm thick second class hardwood, factory made ,glazed and skeleton shutter, open rebated and prepare to received glass, gauge etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc; size of member of shutter as specified in SSR Part-I Section 8 clause 8.24 (a) and fixed to chowkhats complete all as specified and directed.

S&F Galvanished mild steel wire cloth, 0.36 mm nominal dia of wire & average width of aperature 1.40 mm & fixed with tinned tacks, galvanised wire staples, complete all; as specified and directed .

S & F of 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 75 mm dia , PVC (SWR) soil, waste and rain water drainage pipes Double socketed in any length with rubber ring joints, laid in trenches with claims all as specified

S&F in 110 mm dia , PVC (SWR) soil, waste and rain water drainage pipes Double socketed in any length with rubber ring joints, laid in trenches with claims all as specified

S & F 110 MM PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 110mm PVC ( SWR ) vent cowl complete all as specified and directed.

S & F in 75 mm PVC (SWR) floor trap ,plain with grating including jointing with solvent cement complete all as specified and directed.

M& L for PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

M & L for Stop valves, 20 mm bore cast copper alloy screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe and fixed in repairs, complete all as specified.

S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity (White colour) hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size including Supplied and fixed 20mm dia pvc float valve assembly complete all as specified and directed. Make: Sintex/ Dhara/Tuff/ JS Polyplast as approved by GE(I).

E/M Schedule

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified.

Point wiring for one light/fan/bell/exhaust fan point/bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper color coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green color) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. Make of Cable : Polycab, Gloster, Plaza & RR Kabel ) and Make of Conduit : Plaza/Havells/AKG

All as per srl item No117 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and incl PVC conduit complete all as specified and directed

All as per srl item No-117 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed

All as per srl item No-117 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed

M&L for M&L for switch modular type single pole one way 1 module 6 amps 240 volts. complete all as specified and directed Make :Cona/SSK/Leader

M&L Switch modular type one way 1 module 16 amps 230 Volts. complete all as specified and directed Make :Cona/SSK/Leader

M&L for socket 6 amps modular type 2/3 pin combined 2 module , 230 volts complete all as specified and directed Make :Cona/SSK/Leader

M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts. complete all as specified and directed Make :Cona/SSK/Leader

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. Make :Cona/SSK/Leader

Supply and fixing fan regulator modular type 2 module, 230 volts all as required or complete all as specified and directed. Make :Cona/SSK/Leader

M&L in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 2.5 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification acomplete all as specified and directed. Make of Cable : L&T, Havells, Polycab and Make of Conduit : Havells/Kamplast/Polycab

S&F in replacement of wall mounted LED light fittings 20 watt, 6500K, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete connecting electrically complete all as specified and directed. Make : Bajaj/ Havells/ Phillips/ Wipro

Supply and fix in replacement of High power LED Wall Security light 25 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as specified and directed Make : Bajaj/ Havells/ Phillips/ Wipro

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed Make: Legrand/Havells/Indo Asian

M&L MCB single pole & neutral 240 volts 30 to 63 amps,with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. Make: Legrand/HavellsIndo Asian

M&L for MCB single pole 240 volts 5 to 30 amps, with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. Make: Legrand/Havells/Indo Asian

M&L for sand cushioning to underground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed

Supplying and laying sub class b bricks old size, size 230mm x 115mm 75mm complete all as specified and directed.

Supply laying , jointing, testing and commissioning of XLPE insulated, PVC sheathed, strip armoured heavy duty electric cable 16 Sqmm 2 Core with aluminium conductor (stranded) working voltage upto 1100 volt confirming to IS 7098 Pt I in trenches, culvert, through pipe etc including connecting both end with proper size of aluminium lugs duly crimped with die press crimping device and cable gland complete all as specified and directed of the following sizes: Note : 1.Cable laying and jointing are required to be carried out in short / long stretches as per site requirement. 2.Necessary excavation and earth work , sand cusioning, cable cover will be measured seprately.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or complete all as specified and directed and testing on completion.

S & F Lamp holder insulated body with back plate for dome batten fittings complete all as specified and directed. Make :Cona/SSK/Leader

M&L for bell electric heahy duty Ding Dong type 230 volts single pole complete and all as specified.

M&L for bell push modular type 1 module one way 6 amps 240 volts.

M&L for single pole and neutral enclousere with a top pin, earth plug and socket copmlete with one SPN MCB 20 Amps, 240 Volts. Make: Legrand/Havells/ABB/L&T

S&F in replacement of LED mirror light fitting 10/11 Watt,1' long, with efficient heat dissipation and integrated electronic driver complete connecting electrically all as directed. Bajaj/ Havells/ Phillips/ Wipro

Supply and fix sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .Make: Legrand/Havells/Indo Asian

Supply and installation of energy efficient electric water heater (Geyser) storage type, having heating coil of capacity 2 KW , single phase of capacity 50 Ltr with cold rolled steel tank with glass coating inside tank incl fixing on wall with required fastners, nuts,PVC connectiion of inlet and out let, electric connection and writing MES No in black synthetic enemael paint/engraving tool etc complete all as spfd and directed.

Supply and install of Fresh air fan 230 V, AC single phase of size 225 mm sweep, 900 rpm, plastic body, with louvers & shutter, complete with fixing arrangement, electric connection including with rubber mounting for silent operation, grouting of nuts, bolts, in wall/ ventilator, electric connection and writting MES No in black synthetic enamel paint all as specified and directed.

M/s DKS Engineering Works

Khalil Ahmed and Sons

Allied Builders And Engineers