SPL REPAIR TO ROAD AND ROAD FURNITURE NEAR BLDG NO. P-6 (MOUNT PLEASANT) AND SL-125 (MT AREA) AT MOUNT ABU MIL STN UNDER AGE (I) UDAIPUR

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surface in area not exc 400 sqm and depth exc 50mm and not exc 100 mm as specified and removing where complete all as specified and directed by Engineer in Charge.

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with paving bitumen 80/100 (VG-10) grade @ 5 Kg per 10 Sqm on black top surfaces complete all as specified and directed by Engineer in Charge.

M&L for laying premixed bituminous macadam (using binder not less than 4% by weight of total mix) rolled and compected to required gradient and camber (consodlidated thickness 75mm or less) using VG-30 paving bitumen, complete all as specified and directed by Engineer in Charge. Note: No extra payment will be made if binder is more than 4%.

M&L for Preparing black top surfaces by bushing with wire brushes for removing caked mud etc, sweeping with brooms & finning the cleaned surface with air compressor to remove all loose dirt and applying evenly a tack coat @ 5 Kg per 10 Sqm of paving bitumen of VG-10 and material and labour for providing 40mm thick (consilidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% binder content by weight of total mix using VG-40 paving bitumen, with mechanical paver, mixed in hot mix plant, rolled and compacted to required camber and gradient with 8-12 tonne power roller or vibrator roller complete all as specified and directed by Engineer in Charge. Note :- (a) VG-40 Paving bitumen content beyond 5.5% if required on account of design mix shall not be paid and shall be deemed to be included in unit quoted rate.

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust & mud, or water, scoring sunken surfaces in roads, paths, etc. cutting arounds edges to at least 25mm in depth, @ 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed & sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size & again well rammed (including supply of premixed macadam, binder & chippings), depth of potholes exc 30mm, complete all as specified and directed by Engineer in Charge.

Material and labour for painting lines, dashes,arrows, letters etc on roads, pavements and the like exceeding 10cm wide with retro reflective Thermoplastic road marking Paint (white or golden yellow colour) by hot mixing method as per IS specifications, heating with gas, to achieve minimum uniform thickness 1.5 mm using painting materials @ 6.50 kg/sqm and glass beads @250 gm/sqm complete all as specified and directed by Engineer in Charge.

Demolition stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar complete all as specified and directed by Engineer in Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer in Charge.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engineer in Charge.

shri balaji trading corporation (BID ID -3291354)

M/s ESS KAY Construction (BID ID -3291248)