Construction of KVIC Model based community (Biogas Plant) Gobardhan Project at village Nashla Panchayat Bijarni Lower-A Block Bhagwah (Capacity 25 m3) 2nd Call

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone

Carriage Of Sand & Bajri

Carriage of Stones

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level:Concrete Aggregate (RCA): 6 graded stone aggregats 20 mm 1:3:6 (1 Cement: 3 manufactured sand derived from Recycled nominal size Recycled Concrete Aggregate (RCA))

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering finishing and reinforcement All work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) Incuding manufactured sand derived from Recycled Concrets Aggregate (RCA) upto 20%:3 graded stone aggregate 20 mm nominal size of Recycled Concrete Aggregate (RCA)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columna, pillars, piers, abutments, posts and struts etc, above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand Incuding manufactured sand derived hom Recyclad Concrete Aggregate (RCA) upto 20%:3 graded stone aggregate 20 mm nominal size including Recycled concrete Aggregate (RCA) upto 20%.

Reinforced cement concrete work in beams, suspended floors, roofs having stope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering. finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand incuding manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 20%)

Centering and Shuttering including strutting, propping etc. and removal of form for Foundation, footings, bases of columns, etc. for mass concrete

Centering and Shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Extra for shuttering in circular work (20% of respective centering and shuttering items)

Lintels, Beams, plinth beams, girders, bressumets and cantilevers

Columns, pillars, piers, abutments, posts and struts

Steel and reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hot rolled deformed bar

structural steel work in single section, fixed with or without connecting plate, Including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per som as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns, Sheet should have protective guard film of 25 microns minimum to avoid scratches, during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 50 mm) with EPDM seal, complete upto any plich in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tepping screws complete:

12mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

20 mm cement plaster of mix.1:4 (1 cement: 4 fine sand)

Cement plaster 1:3 (1 cement: 3 Coarse sand) finished with floating coat of neat cement 20 mm cement plaster

finishing walls with water proofing cement paint of required shade new work (two or more coats applied @3.84kg/10sqm) add all plaster for painting

Providing and laying 60 mm thick factory made cement concrate interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and Including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc, as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing, laying and fixining SWR pipes with collars jointed with solvents. This includes trenching, refilling, jointing of pipes and fittings with solvent, testing of joints complete.150mm dia SWR Pipe

Fabrication, supply, installation, testing and commissioning of a MS floating biogas holder dome with a manhole cover, biogas outlet, lifting hooks including welding, jointing along with its placement, fitment on site, leakage testing, two coats of primer paint and two coats of paint complete

Supply, installation, laying, joining, testing and commissioning of pipeline from MS floating biogas holder dome to each individual households along with a single burner blogas stove including all MS/GI/MDPE/HDPE/CPVC pipeline and corresponding fittings including all labour and consumables, tools and tackles for digging of trenches (minimum 300mm below mean ground level), refilling of earth, putting necessary markings MS/GI/MDPE/HDPE/CPVC pipeline

Supply, installation, testing and commissioning of a single burner biogas stove along with nylon braide hose, control valve, jointing with teflon tapes and circlips, fitting with main blogas supply pipeline complete.

Supply, installation, laying, joining, testing and commissioning of brickwork chambers and placement, laying and fitment of moisture traps along the biogas pipeline including all MS/GI/MDPE/HDPE/CPVC pipleline and corresponding fittings, brickwork chamber of necessary dimensions, plaster work for chamber Including all labour, material and consumables, tools and tackles for excavation (minimum 600mm below mean ground level), refilling of earth, putting necessary markings

Supply, installation, testing and commissioning of a temperature control system for the entire biogas plant

Supply, installatiom, testing and commissioning of a ioT based control system with measurement of biogas flow, pressure, temperature and its integration along with its necessary MiS dashboard including provision, supply, installation and commissioning of scrubber (if required)