CA No GE(H)-45/2022-23 REPAIR / MAINT OF STREET LIGHTS, PANELS SECURITY LIGHTS, LT POLES AND OTHER CONNECTED ITEMS IN EASTERN AREA OF HISAR MIL STN UNDER GE HISAR

Amount

M&L for checking street light, junction box connection including MCB, MCCB, street light timer connection, cable to overhead lines, overhead conductor jumper and other connected items of street light of any type and any capacity fixed in any position i.e. on wall/pole/watch tower/High mast for repairing in presence of MES rep to ascertain defective parts of the fitting and preparing list of defective parts to be repalced for making the fitting fully functional testing and refixing the fitting in its original position after repairs complete all as specified & directed. Notes for Item No 1.00 :- (a) Items required for repair / replacement work will be measured and paid for separately as "S&F in replacement". (b) Scope of work includes for minor stores e.g. PVC insulation tapes, screws, insulation sleeves, nuts, bolts, washers and flexible cable 23/0.0076 (for internal wiring) etc as required at site.

S&F in replacement LED drivers suitable for any cap & make street light complete all as specified & directed.

S&F in replacement surge protection device 10 KV for LED light fitting complete all as specified & directed.

S&F in replacement cable FRLS, PVC insulated and PVC sheathed size 2.5 sqmm single core multistranded aluminium conductor cable complete all as specified & directed.

S&F in replacement high mast light fitting of any type with LED flood light fitting of cap 150 Watt, 240 Volts, energy saving, environmental friendly, long life, exclusive innovative, die cast aluminium IP66 flood light suitable for highlighting architectural facade and general purpose lighting complete with accessories, pre-wired upto a terminal block and mounting attachment complete all as specified and directed. Make: Cat Part No LFLN-150-CDL/60-M of Crompton (Pluto Neo series) or equivalent of make as mentioned in Appx 'C' list of makes here-in-after.

S&F in replacement LED street light fitting of cap 90 Watt (or nearest higher Cap), energy saving, environmental friendly, long life, exclusive innovative, die-cast aluminium IP65 protection with high power LEDs as light source, including all accessories for fixing or mounting complete all as specified and directed. Make: Cat Part No CRP-404-90-30-SL-GL-NSG of Crompton or equivalent make as mentioned in Appx 'C' list of makes here-in-after.

S&F in replacement of street light LED light fitting 60 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device , connected with and including 0.5 sqmm flexible copper multistranded conductor cable including fixed on wall / pole all as specified and directed. Make : Cat Part No ENDURAPEARLNEOSL60WLED757PASYTOPCAST of Endura Peral Neo series of Havells or LST-60-CDL-M of Crompton or equivalent make as mentioned in Appx 'C' list of makes here-in-after.

S&F in replacement of street light LED light fitting 35 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP66 protection and impact resistance of IK07 connected with and including 0.5 sqmm flexible copper multistranded conductor cable including fixed on wall / pole all as specified and directed. Make : Cat Part No ENDCITYLITPLAT+SL35WLED757SASYBOPCWOSPD of Endura Citylite Platinum Plus of Havells or TRP-400-35-57-SL-LM-NSR of Crompton or equivalent make as mentioned in Appx 'C' list of makes here-in-after.

S&F in replacement post top LED lantern of capacity 25 Watt complete, 230 V AC outdoor type with decorative post for 360 degree indirect light IP-65 protection with impact and corrosion resistant complete with driver and LED lamp all as specified & as directed. Make :- Cat Part No RUBYPT25WLED830SSYMTOPC of Havells or equivalent of make mentioned in Appx 'C' here-in-after.

S&F in replacement twin core flat 6 Sqmm size 1100 volt grade heavy duty cable PVC insulated with aluminum solid conductor over all PVC sheathed complete all as specified and directed.

S&F in replacement MCB TPN of capacity 40A to 100A,10 KA, type 'C',240 volts complete all as specified and directed.

S&F in replacement MCB SPN of capacity 6A to 32A , 10 KA, type 'C', 240 volts complete all as specified and directed.

S&F in replacement street light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 meter length fixed with & including necessary MS Clamps of size 40x5mm including nuts, bolts and washers on pole etc complete all as specified and directed.

Labour only for disconnecting, taking out defective under ground LT cable of length not more than 3 meter and of size 10 sqmm to 25 sqmm including excavation, taking out bricks cover and relaying the old cable in loop and making connection with proper new thimbles with cut out boxes,Feeder pillar box, MCBs etc including refilling of sand, relaying old bricks and returning, filling in soil etc complete all as specified and directed.

M&L for preparation of old painted surface of steel tubular LT poles 9m long and applying two coats of synthetic enamel paint with black and white or yellow strips 30cm wide each upto 1.5m height from top of PCC foundation block and on remaining surface of steel pole applying one coat of aluminium paint after preparation of old steel surfaces including marking of numbering of poles with synthetic enamel paint white in colour in 80mm high letters over 150mm x 230mm yellow base and applying one coat of cement base paint on PCC pedestal complete all as specified and directed.

Excavation in trenches in soft/loose soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

All as per Serial item No 16.00 (here-in-before) but depth exceeding 1.5 mtr and not exceeding 3.00 mtr.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

M&L for brick covering to underground electric cable using sub class ‘B’ bricks, laid dry, flat, perpendicular to the direction of cable etc complete all as specified and directed.

Taking out the old unserviceable LT underground cable upto 16 Sqmm 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors from trenches/wall/floor/road/ culverts or pole etc including brick cover complete all as specified and directed. Note : Excavation and earth work, duct work, GI pipe for laying of cable and sand cushing/cable protection covers etc are beyond the scope of this item and shall be measured & paid for separately under relevant items of BoQ.

Supply , laying , jointing, testing and commissioning of size 10 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed. Note : Excavation, earth work, sand cushion & brick protection shall be paid separately.

All as per item No 22.00 (here-in-before) but 6 Sqmm 4 core.

M&L for Sand cushioning 230mm thickness with dry sand (one layer of 80mm thickness before laying of cable and other layer of 150mm thickness after laying of cable) and punned down to 180mm after laying of cable in trenches for protection of cable complete all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

S&F in replacement Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (40mmx6mm) clamps, bolts, nuts and washers for protection of LT electric cable complete. Note :- Excavation & earthwork shall be measured & paid for separately.

M&L for cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in mass concrete including necessary form work etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm crushed graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles etc complete all as specified and directed.

Dismantling unserviceable concrete pole/struts of any size removing from site etc complete all as specified and directed.

Supply, erecting & fixing true vertical position pre-stressed concrete pole conforming to IS-1678 of 9 mtr long, 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class 10 etc complete all as specified and directed. Note :- (i) The rates quoted shall deemed to include taking out conductors, earth wire from existing pole and refixing on new pole. (ii) Earth work & PCC shall be measured and paid separately in respective items.

Re-stringing / Re-stretching including jointing in situ of each span not more than 45 Mtrs between two electric poles having 3 to 5 Nos of ACSR conductors including GI earth continuity wire, with/ without guarding wires on electric poles of any size at different locations all as ordered manually or by telephonically means to the extent of permissible sag or tension by removing jumpers or bindings from insulators and making fresh binding with aluminium tapes after stringing complete as ordered.

Prunning / trimming the branches of trees if any along overhead line, 3 mtr on all side below/ above/ sides of overhead line and removing the same upto 150 mtr away each span not exceeding 70 mtr etc complete all as specified and directed. Note :- The above is to be ensured for the entire contract period by cutting/trimming of trees any number of times as required.

Supply and fixing pin type insulators LT 1100 Volts grade porcelain vitreous white or brown including one galvanized mild steel spindle, two galvanized iron washers, one galvanised iron nut, 100 mm height, 65 mm dia all as specified and directed.

Supply & fixing shackle type insulator LT 1100 volt grade porcelain vitreous white or brown including galvanised insulator bolts, nuts 12 mm dia and washer including 31x3mm galvanised mild steel straps, 75 mm height and 90 mm dia of insulator complete all as specified and directed.

Dismantling insulator any type / any size from LT pole etc complete, all as directed.

S&F in replacement PVC junction box suitable for street light of size not less than 310mm x 285mm x 180mm, made out of polycarbonate having front side openable shutter duly provided with locking arrangement and provided with 02 Nos aluminium bus bar of rating 32 Amp alongwith 01 No MCB 6 Amp SP and provision of 02 Nos cable entries, fixed on street light pole with proper size MS clamp with nut & bolt and connected assessories complete all as specified and directed.

Rewinding of motor for high mast light of cap 2 HP including repair to winch to lift and lower the high mast light including arrangement for repair / replacement of pinion / gear box, chain, wire etc complete for making the motor and the movement of light carriage simultaneously all as specified & directed.

S&F in replacement 10 sqmm 2 core copper conductor, XLPE insulated PVC sheathed unarmoured cable 1100 Volts grade complete all as specified & directed.

S&F in replacement Lithium based energy efficient integrated, solar street light 30 Watt Cap in single FRP body encase solar PV Panel 53/55Wp monocystalline, lithium battery 11.1/12.8V, 28.6AH with induilt BMS, high brightness W-LED (180lm/Watt) lamp, CRI>70, color temperature 6500K, microcontroller based charge controller cum driver, automatic dimming function with PRI motion sensor, dusk to down operation, LUX output 20-25 (from 8-9 mtr height), working temperature (-) 10 to (+) 55c weight : 14-16 Kg, with adjustable MS clamp suitable for pole/wall mounting, protection : short circuit, overload, reverse polarity and battery protections. Firm should produce vital parameters test report from NABL accredited lab and should be of made in India with CE & ROHS certified and including necessary civil work and incl GI pipe bracket of suitable dia light grade pipe bent to shape of approx length 1.5 mtr including 2 No MS clamp of flat iron of suitable size with nut, bolt washers complete all as specified and directed by Engineer-in-Charge. Make :- CROMPTON Cat Part No CSADSMP30CDL-NC or equivalent or makes as mentioned in List of makes here-in-after.

Aawadh associates

M/S RAJESH KUMAR & SONS

M/s Rao Constructions, 1173 Urban Estate-II, Hisar

KUNAL ENTERPRISES

Raman Electric Trading Co