Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹29.2 L+₹1.4 L (4.86%)Rejected-AOC 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-AOC Other than lowest | |
| 3 | L3₹29.5 L+₹1.6 L (5.87%)Rejected-Finance S O KALA RAM C O LALIT AND BROTHERS UTARLAI UTTARLAI VPO UTTARLAI BARMER RAJASTHAN 344001 | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹29.8 L+₹1.9 L (6.84%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹29.9 L+₹2.0 L (7.22%)Rejected-Finance MAHAVEER NAGAR BARMER RAJASTHAN 344001 MAHAVEER NAGAR BARMER RAJASTHAN 344001 | BARMER | RAJASTHAN | 344001 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
29 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB No. 11 Barmer 344001
REPAIR MAINT TO CERTAIN BLDGS OF BILLETS(SINGLE LVG ACCN FOR AIRMEN, SARGENT, JWO ETC) IN DOMESTIC AREA AT AF STN UTARLAI
2023_MES_631700_1
8445/E8
Open Tender
Civil Works
Item Rate
300 days
Utarlai
As per NIT
8 documents required · 8 mandatory
₹500
Utarlai
₹52,000
Yes
28 Feb 2024
8 Dec 2023
1 Jan 2024
9 Dec 2023
29 Dec 2023
22 Dec 2023
Amount
M&L for rendering 10mm thick on fair faces of concrete surfaces, stone masonry or brickwork/PCC block in cement mortar 1:6 on wall surfaces finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed by Engr-in-charge.
M&L for rendering 15 mm thick on fair faces of brick work/ concrete surfaces PCC block in CM(1:4) finished even and smooth with out using extra cement including taking down old plaster complete all as specified.
M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling or on concrete surfaces finished even and smooth without using extra cement including taking down old plaster complete all as specified and directed by engr-in-charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each
Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm all as specified.
Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed
All as per item No 09 above but exc 1 Sqm and n.exc 2 Sqm each
Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening complete all as specified.
S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification & drawing complete all as specified and directed.
S&F Fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing
S&F 30mm th flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.
S&F 35mm th 2nd class Hard wood (Hollock) Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.
S&F 2nd class HW 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed
S&F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified.
S&F factory made for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and with & including making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.
Supply and fixing galvanized stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.
S & F 100 mm long medium weight, stainless steel Butt hinges complete all as specified and directed..
S & F 100 mm long medium weight, mild steel Butt hinges complete all as specified and directed.
S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.
S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.
S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.
M&L two coats of synthetic enamel paint to steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.
S & F in repair galvanized stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.
Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane, complete including hacking out old broken glass all as specified and directed.
S&F 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.
M & L factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass penes and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.
S & F factory made for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.
S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc and similar work conforming to Fe-290, Gde -E-165 complete including dismantling of wrought iron or mild steel work all as specified.
M&L for 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
M&L for 20mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S&F steel water tubing medium grade galvanized of 15 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors including taking down old tubing complete all as specified and directed.
S&F steel water tubing medium grade galvanized of 20 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors including taking down old tubing complete all as specified and directed.
S&F steel water tubing medium grade galvanized of 25 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors including taking down old tubing complete all as specified and directed.
Taking down and refixing of steel tubing 15mm bore including connections in new or old position including necessary cutting threading with necessary fittings like tees, elbows, sockets, reducers, bends etc complete all as specified and directed.
All as per Item No 38 above but 20mm bore
All as per Item No 38 above but 25mm bore
M & L for Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.
Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished concrete surfaces even and smooth without using extra cement complete as specified.
M&L 40mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even & smooth using extra cement for floor finish all as spd.
M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.
M & L for preperation of formation bed over 25 mm thick sand cushioning complete all as specified and directed
M&L for machine made rubber moulded precast coloured interlocking tiles of any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thick M 35 grade laid, jointed complete all as specified
M & L for cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb, rounded and chamfered on edges etc complete all as specified and directed at site
M & L for rubber molded chequred cement concrete tiles 200 x 200 x 25mm thick laid with cement slurry over a 15mm thick screed bed jointed with CM 1:6 and pointed with grey pigment cement and pigments in floors all as specified.
S & F in repair vitreous china (water closet) squatting pan, orissa pattern, size 580 x 440 mm, white, with CI 100mm dia P or S trap front or back inlet and integral foot rests (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan pedestal pattern(EWC), white incl necessary fixing arrangments (excluding fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device icluding jet spray complete all as specified and directed..
S & F in repair 10 ltr cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm flush pipe of polythene low or high density (including dismantling of half turn valve 32mm of any description if reqd) complete all as specified and directed.
S&F in repair wash hand basin vitreous china wash basin white flat back size 550x400 including supplied and fixed angle iron brakets errecting stand and CP Piller tap fancy type 1 No15 mm bore,32mm PTMT waste coupling& pvc waste pipe 32 mm dia and pvc 15mm 450mm long connection compleete all as specified.
S&F in repair PVC connection 15mm bore and 600mm lenth with PTMT nuts on both ends complete all as spfd and directed.
S&F in repair 15mm bore dia Chroium Plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair fancy type long shank pillar tap of 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair 15 mm bore dia fancy type chromium plated stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm bore two ways brass chromium plated angle cock cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body complete all as specified and directed.
S&F in repair 15 mm bore dia fancy type CP stop valves, long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore all as directed.
S&F in repairs 15mm bore stainless steel CP Health faucet of standared quality and make with high denesity chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed.
S&F in repair chromium plated brass shower rose, 125 mm size with or without swivel joints long chromium plated arm including fixing to steel pipe or union 15mm bore complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repair PVC(SWR) bends 110 mm bore of any radius complete all as specified and directed.
S & F in repair rotational moulded polyethylene three layered ISI marked white colour water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.
S & F in repair rotational moulded polyethylene double layered ISI marked white colour water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.
S&F in repairs cast iron floor trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified.
S&F in repairs plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in repairs vitreous China bowl urinal flat back, minimum size 465 x 355 x 265/430 x 370 x340 mm ,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe complete all as specified.
S&F in repairs 32 mm bore PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as specified and directed..
S&F in repairs 15mm bore stainless steel chromium plated urinal spreader with pvc connection complete all as speicfied.
S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe & fixed complete all as specified and directed.
S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified and directed.
S&F in repair PVC cover (lid) for PVC water tank for necessary locking arangments for 500 & 1000 ltr capacity water tanks complete all as specified and directed.
S&F in repairs 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.
M & L for light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete including dismantling old floor, herth or wall tilling including cement mortar bedding complete and rubbish off the premises complete all as directed.
M&L for glazed coloured ceramic tiles in vertical surface of walls like skirting/ dado etc of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:3 on other then fair faces of brick work complete including dismantling old floor, herth or wall tilling including cement mortar bedding complete and rubbish off the premises complete all as specified & directed.
M&L for glazed coloured ceramic tiles in vertical surface of walls like skirting/ dado etc of size 200X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:3 on other then fair faces of brick work complete including dismantling old floor, herth or wall tilling including cement mortar bedding complete and rubbish off the premises complete all as specified & directed.
S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles complete including dismantling old floor, herth or wall tilling including cement mortar bedding complete and rubbish off the premises complete all as specified.
M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over & including 15mm thick screed bed in CM 1:4 complete including dismantling old floor, herth or wall tilling including cement mortar bedding complete and rubbish off the premises complete all as specified & directed.
M&L for 25mm thick PCC (1:2:4) type B-1, using (20mm graded stone aggregates) as in base concrete to floors finished even & smooth without using extra cement all as specified.
M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete including dismantling of old kota stone all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)
M&L for chipping of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed and removing loose concrete with chisel hammer without much impact on concrete surface, clean the surface by sand blasting using river sand with min 6kg pressure at the nozzle or air blow by applying CICO clean rust remove or equivalent in two coat over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation inhibator coat @ 5Sqm/Ltr with CICO Zincilate-500 or equivalent to reinforcement surface as per manufacturers instructions incl all scaffolding, machinery, tools tackles and men materials and cleaning of debris complete all as specified and as directed by Engr-in-charge.Make CICO clean-O-rust, CICO Zincilate-500 or equivalent of Fosrec/Dr fixit/L&T/STP. Note:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent.
M&L for applying bond coat with CICO-latex SBR or equivalent in Fosroc/Dr Fixit/STP/Sika as per manufacturer instructions, after preparing old surface of RCC to receive Polymer modified one component repair mortar or micro concrete. Laying of polymer modified one component repair mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed. make CICO latex SBR or equivalent in Fosroc/ Dr Fixit/STP. Note:-he Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent.
M&L for preparation the surface and applying 20mm thick in two layer, each layer n.exc. 10mm thick with polymer modified mortar(PMM) on surface of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed with polymer modified one component repair mortar of PMM Cico Repocem or equivalent in Fosroc/ Dr Fixit/STP. inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed.
M&L 10mm thick cement plaster in CM 1:3 mixed with and incl water proofing compound @ 100ml/50Kg of cement or as per manufacturer instructions of CICO-super or equivalent in Fosroc/ Dr Fixit/STP. Note:-he Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent.
Dismantlies of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
M&L for 20cm thick precast cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate block masonry with solid block, exc 10 cm in width & set in CM 1:6 all as specified & as directed.
S&F in repair of Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in chajja covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
S & F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening complete allas specified and directed.
National Rewinding Works
Lalit and Brothers
M/s Malinath Electricals
M/s Sati Jasnath Enterprises
AMBEY MAA CONSTRUCTION COMPANY
M/S Tanisha Traders
Devi Engineeing
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .