SPL REPAIR OFFRS MD ACCN (P-24-04 X QTRS,BLDG NO 181-02 X 02 QTRS AND QTR NO 210/04) UNDER AGE(I) AYODHYA CANTT

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed Note : Height of bldg upto 4th story

M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed. Note : Height of bldg upto 4th story

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed Note : Height of bldg upto 4th story

M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and directed. Note : Height of bldg upto 4th story

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer's instructions over and including two coat of aluminium paint complete all as spd and directed. Note : Height of bldg upto 4th story). 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 300X600X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for dark shade/double charged/ultra charged Vitrified Ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for dark shade/double charged/ultra chargedVitrified Ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.