Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAccepted-AOC R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹15.6 L+₹2.5 L (18.9%)Rejected-Finance GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L2 | Rejected-Finance Other than L1. | |
| 3 | L3₹16.3 L+₹3.2 L (24.4%)Rejected-Finance | L3 | Rejected-Finance Other than L1. | |
| 4 | L4₹17.5 L+₹4.3 L (33.0%)Rejected-Finance | L4 | Rejected-Finance Other than L1. | |
| 5 | L5₹18.0 L+₹4.8 L (36.8%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L5 | Rejected-Finance Other than L1. |
Tender Value
₹20.2 L
EMD Value
₹40,320
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 WKS ENGR PIN 914134 CO 56 APO
SPECIAL REPAIR TO CHAIN LINK FENCING AND DRAINAGE SYSTEM AROUND TECHNICAL AREA AT SHALATENG UNDER AGE I CIF K
2023_MES_630804_1
134WE-46 (T) OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
AGE (I) CIF (K)
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) CIF (K)
₹40,320
Yes
27 Jan 2024
2 Dec 2023
2 Jan 2024
2 Dec 2023
30 Dec 2023
16 Dec 2023
2 Dec 2023 - 9 Dec 2023
Amount
Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight not exceeding 4Kg/ Sqm, complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
Excavating in post holes (or similar holes) each not exc 0.50 Cum, getting out and removing the excavated material/ soil to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point in hard/ dense soil, complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed.
M&L for MS angle iron of size 65x65x6mm thick confirming to Fe-290 Grade-165 as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, cutting and twisting, necessary drilling, bolting and riveting or welding including FI 40x6mm for securing wire mesh etc and similar works, complete all as specified and directed.
Supply only chain link MS galvanised fencing of any size or type, weight not exc 4.0 Kg per Sqm, complete all as specified and directed. Note :- Weight of chain link fencing shall be worked out by BOO to be conveyed by Accepting Officer.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.
S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, type 'A' (Iowa type) and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and directed. Note :- Each line wire to be measured and paid.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5cm but not exceeding 10cm, dia of neck 5 to 10mm, complete all as specified and directed.
S&F mild steel round bars for Ge-410-W (Gde E-250) 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed.
M&L for mild steel framed work such as grills, door or gates and intricated design, including MS angle, MS channel, flat iron, round bars, MS plates etc with ends of bars shouldered and or riveted or forged into spikes including welding as directed and fixing with screws, bolts etc, complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortor 1:4, complete all as specified and directed.
Taking down cement plastering on stone wall/ brick wall etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on stone masonry surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 Mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on brick work / concrete surface, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drain, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in copings, roof kerbs or mud stops, benching, haunching including necessary formwork, weathering/ slightly rounded or camfered angles and throating, complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exc 15cm thick below or above ground level, complete all as specified and directed.
M&L for 225mm thick pavement quality concrete (PQC) of minimum 28 days field flexural strength of 45 Kg/ Sqm or 4.5 Mpa, aggregate gradation as per table 3 of IRC 15-2017, coarse aggregate or clean, hard strong, dense, non- porous and durable pieces of crushed stone or graval, fine aggregate of clean natural sand or gravel, fine aggregae of clean natural sand or crushed stone sand or combination of both using minimum 360Kg/ Cum of cement with non-circular virgin synthetic fibre of 12-18mm length, specified gravity 1.34 to 1.39 UV stable, alkali resistence, with equavalent dia 15-40 micron, minimum melting temperature as 240 degree C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid spread and compacted with slip-form paver of minimum 7.50m width, including curing and tining by Texturing cum curing machine, complete all as specified and directed. Note : Required surface texturing to be done as specified in clause 10.1.14 and table 9 of IRC : 15-2017.
Supply and Laying 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390gram/ Sqm over tack coat/ sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm, complete all as specified and directed.
M&L for 10mm thick sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness laid over existing DLC layer, complete all as specified and directed. Note :- No additional amount to be paid for overlap.
Supply only polyster triangular fibres non-circular virgin synthetic fibre of 12-18mm length, specified gravity 1.34 to 1.39 UV stable, alkali resistence, with equavalent dia 15-40 micron, minimum melting temperature as 240 degree C and minimum tensile strength of 300 Mpa as secondary reinforcement in all types of concrete and mortars (0.25% or at the rate as per manufacturer insturctions by wieght of cement), complete all as specified and directed.
Demolition of reinforced cement concrete as in beam/ slab and similar suspended work, complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, roof beams and columns in floors, roofs, landings, balconies, conopies, deck slabs and in shelves and the like etc, complete all as specified and directed.
Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
S&F TMT Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Notes :- An amount of Rs. 1,76,958.20 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
JK BUILDERS AND ENGINEERS
rafiq trading co
M/S RATHER STEEL WORKS
M/S SHIMAR STAR GLACIER
M/S BASHIR AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .