Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹41.9 LAccepted-AOC | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹43.3 LRejected-Finance | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹44.1 LRejected-Finance 10 AISHWARYA 1ST FLOOR 2ND CROSS ANNAYAPPA GARDEN NEW THIPPASANDRA HAL HAL III STAGE BANGALORE 560075 | BENGALURU URBAN | KARNATAKA | 560075 | THIRD | Rejected-Finance BEING NOT LOWEST | |
| 4 | FORTH₹47.5 LRejected-Finance NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | FORTH | Rejected-Finance BEING NOT LOWEST | |
| 5 | FIFTH₹49.5 LRejected-Finance 39 SR LAYOUT MAIN ROAD NAL WING TUNNEL ROAD MURUGESH PALYA BANGALORE 560 017 | BENGALURU URBAN | KARNATAKA | 560017 | FIFTH | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
11 Sept 2023, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVISION OF CERTAIN EM AND B/R WORKS IN EST ARMOURY AND OTHER SANCATIONED WORKS AT ASTE UNDER GE AF MARATHAHALLI BANGALORE
2023_MES_605914_2
8635/E8
Open Tender
Civil Works
Works
180 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹88,000
Yes
17 Oct 2023
8 Aug 2023
16 Sept 2023
8 Aug 2023
11 Sept 2023
28 Aug 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.
M & L for Machine cut mirror polished kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish, complete all as specified and as directed by Engr-in-charge.
M & L for Machine cut mirror polished kota stone slab as in skirting 20-25mm thick as in skirting including 10mm rendering as in backing coat in cement mortar 1:4., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish, complete all as specified and as directed by Engr-in-charge.
M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.
S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 etc complete all as specified.
Excavation over areas, in Hard/dense soil n exc 1.5 m deep and getting out complete all as specified and as directed by Engr-in-charge.
M&L for 100 mm thick PCC 1:4:8 (40 mm graded crushed stone aggregate) type D-2 as in sub- base of floor all as specified and directed
M & L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors and pavings etc, finishing with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, complete all as directed by Engr-in-charge.
Demolition concrete in ground floors & paving n exc 15cm thickness(below or above GL) complete all as specified and as directed by Engr-in-charge.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc, all as specified.
Material and labour for PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in coping, plinth courses, bed blocks including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
Material and labour for Rubber moulded, Chequered cement concrete tiles 30cmx30cmx20mm thick, set, jointed and pointed with white cement and pigment in floors, over and including 20mm thick screed bed or bedding layer in cement mortar1:4 for laying of tiles, complete all as specified and directed.
M & L for providing pre cast cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in Kerb stone with plain fair faces including chamfers, weatherings, throating etc and setting in CM (1:4) complete with joints to match complete all as specified and as directed by Engr-in-charge..
M&L for applying two coats of synthetic enamel paint (ordinary tint) over a coat of priming paint on new plaster surfaces of any description over 10cm girth or width, complete.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) including door and window frames with shutters each all as specified and directed
S & F framed work such as doors or gates of angle other section with gusset plates, rails, braces, etc. completes, drilled fro fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging: also festering and fixing complete confirming to Fe 410 -W (Gde-E=250 quality A-) complete all as specified and as directed by Engr-in-charge.
S&F Steel window/door including projecting type hinges, steel handle, Complete, with glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-charge.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each all as specified and directed
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading. colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 125 mm long butt hinges extruded Aluminium alloy with galvanised mild steel hinge pin, bright polished Type B-21 fixed to PVC door with screws complete all as specified.
S&F 150mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified.
S&F 150 mm long Aluminium anodised handles extruded section fixed to aluminium /PVC doors with screws complete all as specified.
Taking Down shutters of any description exc 1 Sqm but n.exc 2 Sqm each, including easing and adjusting for refixing in other opening.
Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed
S&F sheet glass ordinary quality 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames, complete all as directed by Engr-in-Charge.
S&F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames , complete all as directed by Engr-in-Charge.
Disconnecting existing tanks capacity exc 500 n.exc 1000 litre and removing to store complete all as directed by Engr-in-Charge.
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks ISI MARKED (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.
S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed. (Minimum weight 20mm - 210 gms) etc complete.
S&F 16mm bore CPVC gate valves complete all as specified.
S&F 20mm bore CPVC gate valves complete all as specified.
S&F in reparis 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed unions etc. complete all as specified.
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge..
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge..
Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.
Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.
S&F in repair Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified.
S&F in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.
S&F in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern, all as specified and directed.
S&F in repairs toilet paper holder of Brass, chromium plated, fixed to walls with chromium plated brass screws, complete all as specified and directed.
S&F in repairs chromium plated health faucet with all accessories fixed to existing iron pipe, etc complete all as specified and as directed.
S&F in repair chromium plated shower rose of 125mm size with arm and swivel joints, ncluding fixing to steel pipe or union etc complete all as specified
S & F in repair chromium plated Stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and as directed by Engr-in-charge.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 Gms) complete all as specified and as directed by Engr-in-charge.
S&F in repairs Chromium plated Fancy type 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as directed by Engr-in-Charge.
S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed by Engr-in-charge..
S&F in repair CP soap dish/tray fixed to walls with rubber brass chromium plated screws complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.
S&F in repair 100mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified.
S&F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms) . complete all as directed by Engr-in-Charge.
S&F waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60gms) . complete all as directed by Engr-in-Charge.
S&F in repairs 75mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.
S&F in repairs PVC (SWR) 75mm bore bends any radius complete all as specified and as directed by Engr-in-charge.
S&F in repairs PVC (SWR)75 mm bore floor trap, plain with grating incl jointing with solvent cement complete all as specified and as directed by Engr-in-charge.
S&F in repairs 110mm bore PVC(SWR) pipe with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-charge.
S&F in repairs PVC (SWR) 110 mm bore bends any radius complete all as specified and as directed by Engr-in-charge.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engr-in-charge.
Cutting into existing manholes for connecting new drains making good to opening and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benching , dia of pipe 150mm all as specified.
M&L for providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Taking down, plastering from Roof surfaces and vertical surfaces including removal of existing roof treatment, cleaning, hacking for key scrubbing down with water, and removal of debries from out side MoD land /Unit area without any extra cost etc. complete all as specified and directed. Note : Any damages occures to the electrical cable/Telephone cable/Signal cable or any cables laying on roof/Lightening protection strips fixed on the roof/ AC unit fitted on the roof/Anteena signal structure fitted on roof shall be rectified/repaired/refixted by the contractor with in 24Hrs without any extra cost.
Removing excavated material to a distance exc. 1.50 km but n exc. 5 km/out side the MoD/Unit area and depositing where directed.
M&L for brushing neat cement slurry with 3 Kg of cement per sqm on old surfaces of concrete or plaster on roof all as specified and directed
M&L screed bed in cement mortar (1:3) 20 mm thick using WPC as per manufactures instructions etc. on concrete surface as in required slope for draning out the rain water all as directed Note : WPC will be paid separately.
M&L for 10mm thick rendering on roof and vertical surfaces in CM 1:3 surface finished fair and even using WPC as per manufactures instructions complete all as specified. Note : WPC will paid separately.
Supply only water proofing compound conplast X 421 IC of FOSROC chemcial (Indian limted) or equivalent in Dr fixit.
Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in padding of roof for making slope, coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.
M&L for water proofing treatment on horizontal or vertical surfaces applying oil based bitumen primer @ 0.20Kg/Sqm and providing 4mm Thick approved modified water proofing membrane weighing not less than 4.0 Kg per Sqm reinforced with non Woven polyester mat weighing not less than 160gm per sqm having softening point not less than 150 degree centigrade, having tensile strength of 650N/Sqcm and 350/N/Sqcm in longitudinal and transverse directions respectively of the reinforcement and tearing strength of 180N by torch application with minium 10cm side overlap and 15cm end lap, a coat of hot blown bitumen 90/15 @ 1.2Kg per Sqm is apply on top of polymeric membrane and finally finished with one coat of solar reflective bituminous aluminum paint @ 100 Grams/Sqm all as specified and directed
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls with MS clamps etc. complete all as specified..
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed
S&F in repair 100mm dia grating doom of PTMT (Minimum weight 40 gms) complete all as specified.
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exc half brick wall and n.exc one brick wall etc. and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 but except Blocks etc. complete.
Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete.
Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc
M&L for rendering 10mm thick in cement mortar 1:6 on fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement
M&L for rendering 15mm thick in patches in cement mortar in 1:4 on other than fair face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound complete all as specified and as directed by Engr-in-charge.
M&L for rendering 5mm thick in patches in cement mortar in 1:3 on ceiling complete all as specified and as directed by Engr-in-charge.
Dismantling of Posts embedded in Concrete, brick work, masonry, etc posts or struts (wood, steel or R.C.C.) any section., including taking out embedded portion and making good disturbed ground etc. complete all as specified and directed by Engineer - in - charge.
Dismantling barbed wire fencing of any description
S&F for angle iron posts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed by Engineer - in - charge.
S&F galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified and directed.
S&F for zinc coated Concertina coil (dia appox 610 mm) with core wire of thickness 2.60 mm having tensile strength not less than 1650 N/Sqmm and zinc coating 230 GSM and 0.5 mm thick cold rolled carbon strip having 50 numbers of spiral turns having zinc coating 120 GSM with 125 clips per coil of 1.6 mm thickness .The approximate weight of Concertina coil shall be 8.50 Kg per Running Metre and could be stretched to cover a distance of 6 to 7 running metres fixed at 3.00 m height wall on angle iron Y shaped which is placed 2.40 m to 3.0 m above the ground level complete all as specified and directed. Make: Jindal, Tata, A1Fence Product Company Ltd. Note- The measurments shall be recorded for the stretched length of Concertina coil.The contractor shall quote his rate accordingly.
M&L for painting on steel or iron surface of any description over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over a coat of read oxide zinc chrome primer including preparation of surface all as specified and directed.
M&L for preparation of new surface/undecorated surfaces of ceilings and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as directed by Engr-in-Charge.
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty on plastered surfaces etc. complete all as specified.
M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified
M&L for Preparation of old surface of ceiling and applying one coat of Oil bound distemper complete all as specified.
M&L for preparation of Old surface of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty on plastered surfaces etc including complete removal of existing surfaces of any etc. complete all as specified.
M&L for preparation of old surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint including complete removal of existing surfaces of any etc. complete all as specified
M&L for preparation of Old surfaces of walls and applying two coats of Plastic emulsion paint over a coat of priming on walls including complete removal of existing finishes etc. complete all as specified.
M&L for Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.
M&L for Preparation of old painted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified.
S & F Aluminium anodised bolts barrel tower bolts 200 mm long of extruded section complete all as specified and directed.
M&L for Pre-cast cement concrete laid in cement mortar (1:4) type B1 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.
M&L for rendering 15mm thick cement mortar in 1:4 on fair face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.
M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)
Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.
M&L for Reinforced cement concrete (nominal mix) 1:2:4 Type B-0(12.50 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20 mm thick screed bed in cement mortar (1:4) complete complete all as specified and directed.
M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15 mm rendering as in backing coat in cement mortar 1:4 complete all as specified and directed.
S&F sinks with drainage board made out of stainless steel sheet l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fix vitreous China wash basin, white, flat back, size 630 x 450mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.
S&F in repair 15 mm dia bore fancy type chromium plated bib taps screwed for iron pipe, or for brass ferrule complete all as specified and as directed.
S&F Grating square 150mm dia of PTMT(Minimum weight 100 gms) complete all as specified and directed.
S&F in repairs Two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge
S & F PVC waste pipe, 32 mm dia for WHB or sink, complete all as specified and directed.
S & F in repairs PVC waste pipe for urinal, complete all as specified and directed.
S&F 110 mm bore of pipe PVC (SWR) P trap of any radius / shoe fixed to PVC pipes complete all as specified and as directed.
S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed.
S&F 75 mm bore of pipe PVC (SWR) junction single T of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.
Dismantling water tanks exc 250 & n exc 500 ltr and removing to store complete all as specified and directed.
S&F in repairs rotational moulded polythylene water storage tanks 500 ltrs capacity ISI MARKED (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides of soffit (if any) of foundation and plinth beams, and similar work vertical or batter for rough finished surface all as specified and directed.
M & L for preparation of old surface and applying one coat of oil bound distempering on walls complete all as specified and directed.
M & L for preparation of old surface and applying one coat of white washing paint on ceiling complete all as specified and directed.
S&F steel windows with double leaf double shutter (Glazed/gauzed) made out of 'Z' section of size 20x25x20mm of 3.5mm thick using flash butt welded and tennon riveting as per IS 1038-1983, side hung shutters including projection type hinges with steel handles of 'Z' section and steel Peg stay , complete with glazing bars and locking arrangements welded to shutters including necessary shutters incl necessary beading with MS Flats for securing wire gauge complete all as specified including making good to jambs with cement mortar 1:4 and finished to match with the existing surface all as specified and directed
M&L Framed work such as grills, gratings etc with ends of bars shouldered and /or riveted or froged into spikes framed guard bars confirming to Ge-410-0 or Fe-310-0
M&L for preparation of new surfaces of steel and iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified
M & L Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and directed
S & F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.4mm and fixed with tined tacks are galvanised wire staples.
Removing building materials etc.to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified
S & Fix 5.5mm thick Sheet glass of ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane fixed to alluminium frame works with necessary rubber beadings etc. Complete all as specified and as directed
S&F powder coated anodised alluminium frame for sliding doors, window, ventilators, partitions with one or more rebates including joining cleat etc. (minimum thickness of powder coating 50 micron) and fixing/finished with metal paste on gaps of the surface in contact with stone masonry walls / brick walls complete all as specified and as directed by Engr-in-Charge.
S&F Powder coated Anodised aluminium window and ventilator shutters sliding type complete without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. powder coating of any colour (Thickness or powder coating not less than 50 micron) etc. complete all as specified and as directed by Engr-in-Charge.
Taking down copper/aluminium point wiring (light, fan socket or power) any type of batten or conduit complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed.
Taking down carefully unserviceable sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc including two coats of white /colour washing/ distempering etc to match the existing complete all as specified and directed.
Taking down carefully unserviceable distribution boards/metal enclosures of any type and capacity including wooden board and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/ distempering etc to match the existing complete all as directed by EIC.
M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed/ surface type conduit/ casing caping of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the following:- (a) One light point /Fan /Exhuast Fan point controlled by one switch.
Description all as per item No 138 above but One 5 Amps socket point on same board with other switches
Description all as per item No 138 One 5 Amps socket point on independent board.
Description all as per item No 138 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board .
All as per item No.138 above but wiring complete with 4.0 Sqmm for 3 pin 15/30 A socket multipurpose on independent board for AC point
Supply & fixing in repair for ceiling rose 3 terminals.
Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed
S & F modular socket 06 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed
S & F modular socket 06/16 Amps 2/3 pin combined 2 module complete all as specified & directed.
Supply and fix in repair for LED Tube light fitting 1 x 20 W , Surface mounted , industrial box type luminaire with CRCA body, pre- coated in white & pre- wired for LED tube, bipin holders, connector block etc.,including 20W -1 No LED T8 tubular lamp with in built driver, complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed
S & F MCB SPN 40 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.
S & F MCB DB SPN 12 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
S&F Celing Fan complete with blades , down rods ,elcetrinic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed.
Supply and fix electric water heater,storage type ABS body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate,NRV, connection piece etc.
Supply and Fixing Wall mounting Fan 400 mm sweep deluxe type along with speed control complete . Make : Havells/ Philips / Bajaj
M & L for sub main wiring complete with two runs of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall/ concealed , roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
S & F in repair electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.
S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge
Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store and after false ceiling work hanging only ceiling fan (M.D supply) with extension rod as per site required and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
S&F in repair Lumiline LED tube with box type fitting , 2 feet, 10 watts alongwith tube complete all as specified and directed.
Taking down old u/s Ceiling/wall fittings of 1x11W/20W of any type, S & F LED fitting of 6 watts - Square surface mounted LED flat panel down light, PDC aluminum housing and PMMA diffuser makes it a robust Luminaire alongwith 6W LED lamp complete all as specified.
S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
S & F MCB DB SPN 4 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
Supply and fix exhaust fan, made of study engineering plastic complete louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 300mm sweep complete all as specified and directed.
Supply & fixing GI earth wire 4.00 mm dia for interconnecting of earth electrodes all as specified.
Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.
Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable including taking out old bricks from trenches and separating serviceable bricks and set aside for reuse complete all as specified and as directed.
Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms each in depth complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified.
M&L for Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified.
Supply and fixing of GI tubing, light grade, 50 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / ZINDAL / Bansal .
M & L for DWC Pipe of size 63 mm bore for protection of cables to be laid under roads, on walls with fixing of clamps and crossings/culverts complete all as specified and directed.
Taking out/up underground unservicable cable of any size from existing trench including bricks, etc and removing of materials from work site all as directed by Engr-in-charge.
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured LT electric power under ground cables, heavy duty with aluminium conductor of cross sectional area 10 sqmm 2 core with all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed.
All as per ser item No 174 above, but, of cross sectional area 25 sqmm 3.5 core
Material and labour for boring of holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe upto 150 mm dia suitable for 0.4 mpa working pressure complete as specified and as directed.
S&F PVC Junction box of size 255X200X100mm inside dimension fixed on pole by means of mild steel clamps with hinged door, bolt and nuts, provn for cable entry for incoming and outgoing including MCB 2.5 amps-1 No and 4 way connector-1nos neccessary connection duly fixed with clamps on pole and including cable glands threaded type IP55/IP65 made of polymide with lock nut complete all as specified. Make : Sintex GSJB2520 or equivalent in Havells/Polycab.
Supply and fixing of Endura Citylite Platinum, 35 W LED Street Light fitting pressure die cast aluminium housing, heat resistance toughened glass, IP-65/66 protection including with bracket made out of GI pipe 32 mm complete all as specified and directed.
Supply and fixing of GI tubing, light grade, 32 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / ZINDAL / Bansal .
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations for electric poles, filling and mass concrete complete all as specified and directed.
Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 4 core x 10 Sqmm complete all as specified and directed.
S&F Powder Coated aluminium door shutters (minimum thickness powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. complete all as specified. Note: Glass will be measured and paid separately.
Supply and fixing aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified.
M/S PANJUGULA SUDARSHAN REDDY
VARALAKSHMI CONSTRUCTIONS
PRAGATHI BUILDERS
GKR and CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .