GE/PNH-27/2024-25

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness, below or above ground level complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided fors, complete all as specified and directed.

Demolition of stone soling laid dry and removal for re-using, complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry build in cement mortar including all quoins arches pillars etc. complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Dismantling posts or struts steel or RCC embedded in concrete any section including taking out embeded portion and making good distrubed groung complete all as specified and directed.

Dismantling of steel or wrought iron or mild steel, barbed wire of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed.

M & L Stone masonry walling of random rubble, bedded and solidly hearted built in CM 1:6 brought upto courses complete all as specified and directed.

All as per Ser item No 10.00 above but except stones complete all as specified and directed.

M & L for brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

All as per Ser item No 12.00 above but except brick complete all as specified and directed.

M & L for precast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregates as in bond stones walling, bed plates, anchorage blocks etc and set in CM 1:6 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregates) as in bed block, coping, benching and similar work including necessary form work complete all as specified and directed.

M&L for boulder filling dry, as in back filling for retaining wall complete all as specified and directed.

M & L for rendering 20 mm thick in cement mortar 1:4 on other than fair faces of brick work or stone masonary surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed.

M&L for raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:3, complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or stone masonary surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces of walls complete all as specified and as directed.

M&L for Hard core of broken stone/boulders of gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified.

All as per srl item No. 22 above but except stone (obtained from srl item No. 3 here in above)complete all as specified and directed.

M & L for 100 mm thick plain cement concrete 14:8 type D-2, using 40mm graded crushed stone aggregates as in sub base in floors etc complete all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified and directed.

Forming 12mm thick expansion joint and filled with performed bituminous filler and top 30mm primed & sealed with sealing compound grade 'A' complete all as specified and directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregates as in surfaces channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil(soft/loose and hard/dense soil), returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M & L for mild steel as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

M & L for mild steel round bars 10mm dia and over Gde Fe-410 W over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed.

S&F MS framed work such as steel gates, including pintle hinges, stops, han made sliding bolts etc and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed.

M&L for preparation of new untreated steel and iron surfaces of any description over 10 cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat Red oxide zinc chrome primer etc complete all as specified and as directed by Engr-in-Charge.

M&L for chequered cement concrete tiles with chemical resistant coating if size 300x300x 25mm thick, set & jointed in neat cement slurry in floors and pointed with grey cement mixed with pigments, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for sand filing under floor incl spreading and levelling in layers not exc 25 cm thick complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade,laid jointed pointed with grey cement and no pigments, complete all as specified and directed by Engr-in-Charge. Note: The sample shall be got approved by GE before bulk procurement & lot shall be got tested independently by the GE.

ABINASHI ENTERPRISES

M/S BHATT TRADERS

SUNIL KUMAR SANGEET KUMAR AND SONS

Modh Hafiz Khan

M/S SEVEN LAKE CONSTRUCTION

VIKAS ENTERPRISES

Maqsood Ahmed

M/S BADRI NATH GUPTA