Loading…
Loading…
Updated dates
Tender Value
₹14.3 Cr
EMD Value
₹24.3 L
Closing Date
8 Jun 2026, 4:00 pm3d left
Executive Engineer
HPPWD Division Nadaun
Balance work of Construction of Civil works, water supply and sanitary installation Sewerage work, Septic Tank Soak Pit, Rain water harvesting tank, Under Ground Water Tank, Fire Tank with Pump Room, Development work and Landscaping work
2026_PWD_135426_1
Construction of Auditorium Hall in Dr. Radha Krishanan Govt. Medical College Hamirpur at Jol Sapper
Open Tender
Civil Works - Buildings
120 days
Nadaun
Please refer Tender documents.
17 documents required · 17 mandatory
₹20,000
EE Nadaun
₹24.3 L
1 Jun 2026
1 Jun 2026
8 Jun 2026
1 Jun 2026
8 Jun 2026
1 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | 1 | Per Cubic Metre | 328.75 | ₹328.42 | BI01010001010000000000000515BI0100001113 |
| 2 | Providing and fixing 18 mm (Eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut one piece for kitchen platforms, vanity counters, window sills, facias stair steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera Granite of any colour and shade complete at all levels. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. | 1 | Per Square metre | 4,790 | ₹4,785.21 | BI01010001010000000000000515BI0100001114 |
| 3 | Structural steel work of (TATA/SAIL/Apollo/JSW Make ), riveted, bolted or welded in built up sections/, trusses and framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | 0.29 | Per Kilogram | 133 | ₹38.57 | BI01010001010000000000000515BI0100001115 |
| 4 | Providing and fixing prepainted Sandwitch puff roofing with top skin 0.60mm ( zero point sixty millimetre) thickness prepainted profile sheet made of cold rolled steel coil having a puff ( Polyurethene foam) depth of 50mm ( fifty millimetre) and interior skin of prepainted galvanised iron profile sheet of TATA/JSW make (size shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm ( zero point forty millimetre) (+0.05%) ( Plus zero point zero five percentage) total coated thickness with Zinc coating 120 ( one hundred twenty) grams per square meter as per IS: 277 ( two hundred seventy seven) in 240 ( two hundred forty) MPA steel grade, 5-7 ( five- seven) micron epoxy primer on both side of sheet and Polyster top coat 15-18 ( fifteen - eingteen) microns sheet should having protective guard film of 25 ( twenty five) micron minimium to avoid scratches by Engineer in-Charge. Sheet shall be fixes using self drilling/ self tapping screw of size (5.50 x55mm) ( five point fifty into fifty five millimetre) with EPDM seal complete upto any pitch in Horizontal/ vetical or curved surface excluding the cost of Purlin, rafter and Trusses and including cutting to size and shape whatever required complete upto all floor level/ Height including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | - | Per Square metre | 3,450 | - | BI01010001010000000000000515BI0100001116 |
| 5 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (Thirty) design mix to obtain the minimum compressive strength of 30N/mm square (Thirty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate Four hundred kilogram Per Cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 (Indian Standard : Ninty one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | 1 | Per Cubic Metre | 10,480 | ₹10,469.52 | BI01010001010000000000000515BI0100001117 |
| 6 | Steel reinforcement (SAIL / TISCO/RINL/JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | 1 | Per Kilogram | 109.6 | ₹109.49 | BI01010001010000000000000515BI0100001118 |
| 7 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm ( one hundred twenty gram per square metre) (both side inclusive) as per IS : 277 ( two hundred seventy seven) and consisting of angle cleats of size 25 mm ( twenty five millimetre) wide x 1.6 mm ( one point six millimetre) thick with flanges of 27 mm ( twenty seven millimetre) and 37mm ( thity seven millimetre) , at 1200 mm ( one thousand two hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm ( twelve point five millimetre) dia x 50mm ( fifty millimetre) long with 6mm ( six millimetre) dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm ( twenty five into ten into zero point five zero millimetre) of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm ( forty five into fifteen into zero point nine millietre) running at the spacing of 1200 mm ( one thousand two hundred millimetre) centre to centre, to which the ceiling section 0.5 mm ( zero point five millimetre) thick bottom wedge of 80 mm ( eighty millimetre) with tapered flanges of 26 mm ( twenty six millimetre) each having lips of 10.5 mm ( ten point five millimetre) , at 450 mm ( four hundred fifty millimetre) centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm ( two point six four millimetre) dia x 230 mm ( two hundred thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm ( zero point five millimetre) thick 27 mm ( twenty seven millimetre) high having flanges of 20 mm ( twenty millimetre) and 30 mm ( thirty millimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm ( four hundred fifty millimetre) centre, with 25mm ( twenty five millimetre) long dry wall screws @ 230 mm ( two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm ( three point five into twenty five millimetre) at 230 mm c/c ( two hundred thirty millimetre center to center) , including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 ( three) layers covering upto 150 mm ( one hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm ( twelve point five millimetre) thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | 0.2 | Per Square metre | 2,322 | ₹464.4 | BI01010001010000000000000515BI0100001119 |
| 8 | Providing and laying Tremix flooring 100mm (one hundred millimeter) thick with RCC M-30 ( M-thirty) grade design mix finished with a floating coat of neat cement, to be done in panel and each panel shall be of 3.50 ( three point fifty) meter and appropriate reinforcement bar shall be laid in layer of two or one keeping the concrete cover of 50 ( fifty) (it may differ as per standard). Casting of concrete flooring in panels to avoid shrinkage cracks and work as expansion joints, an appropriate steel bar shall be laid in layer two or one keeping the concrete cover of 50 mm ( fifty millimetre) .The rate to include cost of all materials, labour,equipments involved in operations described above but excluding the cost of reinforcement steel and sealants which shall be paid separately upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | 1 | Per Cubic Metre | 15,822 | ₹15,806.18 | BI01010001010000000000000515BI0100001120 |
| 9 | Providing and fixing 90cm ( ninety centimetre) wide corrugated cold form decking sheet with required number of shear struds as specified by designer upto 7.20 ( seven point twenty ) metre in length manufactured from hot dipped zink coated high strength steel with minimum 550 ( five hundred fifty) Mpa yeild strength and minimum zink coating mass of 275 Grm ( two hundred seventy five gram) per square metre on both side of street. The steel confirms to AS 1397 and BSEN 10147:2000.Cross corrugation to be provide by cutting out the corrugation and placed at maximum spacing of 50 cm center to center. The cross corrugation at the edges shall at 10Cm ( ten centimetre) from the edge upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government | 1 | Per Square metre | 1,155.9 | ₹1,154.74 | BI01010001010000000000000515BI0100001121 |
| 10 | Providing and fixing 1st quality HD series Vitrified Digital Glazed rectified ceramic glazed wall tiles 600mmx1200 mm ( Six hundred millimetre into one thousand two hundred millimetre ) conforming to IS : 15622 (minimum thickness 10mm ( ten millimetre) ) of Orient bell/ Kazaria/ Rak/Johnson and Johnson make , in all colours, shades except burgundy, bottle green, black as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointings in white cement mixed with pigment of matching shade complete in pattern finish approved upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government | 1 | Per Square metre | 1,868.75 | ₹1,866.88 | BI01010001010000000000000515BI0100001122 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.66 MB
Tendernotice_2.pdf
PDF • 0.48 MB
Tendernotice_3.pdf
PDF • 0.21 MB
Tendernotice_4.pdf
PDF • 0.56 MB
BOQ_200593.xls
BOQ • 0.45 MB
SBD.pdf
Tender Documents • 3.61 MB
Download all tender documents and submit your bid