Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC SULTANPUR NEAR POLICE CHAUKI DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | L1 | Accepted-AOC AWARD | |
| 2 | L2₹34.1 L+₹2.8 L (9.10%)Rejected-Finance KAGZI MOHALLA DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹36.1 L+₹4.8 L (15.4%)Rejected-Finance 16 GRAND SQUARE DANAPUR CANTT 801503 | DANAPUR CANTT | PATNA | BIHAR | 801503 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹13.4 L
EMD Value
₹26,800
Closing Date
29 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GARRISON ENGINEER DANAPUR CANTT PIN 801503
WELCOME MAINTENANCE AND CERTAIN MISC REPAIR WORK OF OFFICERS MD ACCN POLO SQUARE KONARK VAISHALI AND OTHER CONNECTED AREA WITH EXTERNAL PERIODICAL OF CERTAIN BLDGS IN AGE BR II UNDER GE DANAPUR CANTT
2023_MES_587923_1
GE/DNR/T- / 8676/E8
Open Tender
Civil Works
Item Rate
270 days
DANAPUR
AS PER NIT
8 documents required · 8 mandatory
₹500
Yes
GE DANAPUR
₹26,800
Yes
18 May 2023
1 Apr 2023
2 May 2023
1 Apr 2023
29 Apr 2023
15 Apr 2023
Amount
M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed.
~Ditto~ all as per item No. 1.00 above but on ceiling surfaces.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc all as specified and directed.
Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises all as specified.
Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors omplete all as specified and directed.
M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.36 sqm but not exceeding 0.42 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.
M&L for 10mm thick Light shade vitrified ceramic tiles, exceeding 0.36 sqm but not exceeding 0.42 sqm as in vertical surface skirtings, dados etc, over and including 10 mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement omplete all as specified and directed.
M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade etc.complete all as specified and directed.
M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed
M&L for glazed ceramics coloured tiles of size (450x300x 7mm) thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed.
M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.
~Ditto~ all as per item No. 13.00 above but except bricks.
M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 complete all as specified and as directed.
M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete etc. complete all as specified and as directed..
M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed..
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and as directed.
Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etccomplete all as specified and as directed..
M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed.. Note : Liquid WPC will be measured and paid separately.
M&L Rendering 5mm thick in cement mortar 1:3 on concrete surface of ceiling and finishing the surface even and smooth complete all as specified and directed
Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.
Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.
All as per above item No 24.00 but exc 1.5 Sqm but n.exc. 4 Sqm each.
Taking down shutters of any description exc 1.00 Sqm and n exc 2Sqm each complete all as specified and directed.
M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed.
S & F 35 mm thick factory made 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door etc complete, size of member of shutter as specified in SSR Part -I, complete all as specified and directed.
S & F of 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.
S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with MS handles and tower bolts pegstay, hold fast complete with glazing & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with MS handles and tower bolts hold fast complete with out glazing bar & wire gauzed bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed.
S&F steel ventilators with top hung shutters including hinges, steel peg stay hold fast including taking down existing ventilators complete all as specified and directed.
S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed.
S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates including PCC 1:3:6 type C-0 using 12.5 mm graded stone agregate as in back filling of chowkat etc., complete all as specified and directed.
S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates including PCC 1:3:6 type C-0 using 12.5 mm graded stone agregate as in back filling of chowkat etc., complete all as specified and directed.
S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S & F solid PVC door frame of size 75 mm x 50 mm made out of choice colour PVC with wood grain solid as per specified & directed .
S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.. Make approved by GE..
S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.
S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed.
S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed
S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed
S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed
S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.
S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified.
S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete all as specified and directed
S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each complete all as specified and directed.
S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.
S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed.
S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.
S& F 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.
S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.
Taking down old wooden/wood based particle board & S&F 18/19 mm thick pre-laminated particle board one side lamination & other side balancing white or other colour etc with self closing heavy duty casement type sliding channel & hinges of approved make in kitchen cabinet, cupboards etc complete all as specified and directed.
S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed
S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed.
S&F in repair 40 mm dia cup board knobs, fixed with nut, screw and washer of mild steel bright finish as approved by Engr-in-Charge complete all as specified and directed.
S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed.
M & L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sq cm complete all as specified and directed
S&F in repair 2 lever brass cupboard lock grade-I size 65 mm etc complete all as specified and directed.
S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.
S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed.
S&F in repair stainless steel designer curtain rod fancy type curten rod 20 mm dia as approved complete..
S&F stainless steel Brackets with knobs fancy type for stainless steel designer curtain rod 20 mm dia as approved complete all as specified and directed.
S & F in rapair mild steel conduit curtain rod with PVC coating fancy type drapery rod 20 mm dia of any colour as approved complete all as specified and directed.
S&F in repair Fancy type Brass Brackets for PVC coating fancy type drapery rod 20 mm dia of any colour as approved and fixed complete all as specified and as directed.
S&F powder coated anodised aluminium frame & shutters sliding or casement type for window/ventilator with one or more rebates including joining cleats, glazing clips, rubber packing, aluminium snap beading, screw etc for fixingcomplete all as specified and directede.
Taking up or down steel tubing and connections 15 mm dia complete all as specified and directed.
Taking up or down steel tubing and connections, of 20 mm dia complete all as specified and directed.
S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed
S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore complete all as specified and directed
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth complete all as specified and directed.
S&F in repair brass chromium plated central hole basin mixer with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete all as specified and directed.
S&F in repair brass chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed.
S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.
S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.
S&F in repair vitreous china squatting pan, Orissa pattern of size 580 x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed.
S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.
S&F in repair brass chromium plated health faucet for EWC with 8 mm dia and 1.2 m long flexible CP tube long including nut/washer complete all as specified and directed.
S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed.
S&F in replacement of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed.
S&F in repair cast copper alloy bib tap 15 mm bore fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed.
S&F in repair pillar tap 15 mm bore fancy type chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair brass CP steel tubular towel rail 20 mm dia "D" type 60 cm long between flange aluminium anodised complete all as specified and directed.
S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia.
S&F in repair CP two way angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.
S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44) complete all as specified and directed.
S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed.
S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.
S&F in repair brass chromium plated overhead shower rose swivel type125 mm with CP arms 300 mm long complete all as specified and directed.
S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.
S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.
S&F chromium plated toilet paper holder with flap complete all as specified and directed.
M&L for RCC 1:1.5:3 A-1 type (using 20 mm graded stone aggregate) as in kitchen platform, shelves including necessary form work complete all as specified and directed.
M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.
S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping as in stirrups hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.
Taking down PVC/AC pipes upto 110mm bore(including all fittings) with spigot & socket encls & lead joints incl burning out joints complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.
S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed.
M & L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed.
M & L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed.
S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.
S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete
S&F in repair CP/PTMT grating with or without waste hole 100 mm size (ISI Marked) complete all as specified and directed.
Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.
Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.
S&F 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed (specified in SSR Part-I).
~Ditto~ all as per item No. 112.00 above but 1000 Ltrs capacity.
S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.
S & F in repair 20 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed.
M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed
M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and as directed
M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and as directed
M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete all as specified and directed.
M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed.
~Ditto~ all as per item No. 126.00 above but on ceiling complete all as specified and directed
M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
M&L Preparing old painted surfaces of walls, chajjas etc by washing, rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.
Preparing surface of sunken slab and applying 15 mm thick plaster in cement mortor 1:4 mixed with and including integral water proofing compound both on floor and wall. The surface shall be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.
M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank "Tank cleaned on ____ Dt_____". Capacity 500 Ltrs all as directed by Engr-in-Charge.
All as per item No 132.00 above but capacity 1000 litres.
M&L for treating the surface including grinding and polishing with beewax polish in terrazzo floors complete all as specified and directed. (Necessary T&P will be provided by contractor)
S&F rubber gasket for door sealing complete all as specified and directed
S&F in repair garage/gate mild steel door shutter including necessary welding if required and make it functional as specified and directed
Easing of steel window of glazed and gauzed shutter including oiling, greasing and welding if required and make it functional as specified and as directed.
Easing of wooden door shutter (Panelled or skelton) and make it functional as specified and as directed.
S&F in repair towel ring fixed with and chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
Taking down door shutter of any description not exc. 1 sqm each complete all as specified and directed.
Demolition concrete of any description and in any position not other wise described provided for complete all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for columns, beams, intels etc complete all as specified and directed.
M & L for plain Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, kneelers apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.
M&L plain cement concrete nominal mix 1:3:6 type B-1 using 20mm graded stone aggregate as in surface channel drain including necessary form work as required complete all as specified as directed.
M&L for hard core of broken bricks gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.
M & L for providing 40 mm thick cement concrete M-15 Nominal Mix (using 12.50 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth with using extra cement complete all as specified and directed.
S&F Glass dividing strips, 3 mm thick and 28 mm wide complete all as specified and directed.
M & L for providing reinforced cement concrete nominal mix 1:1 1/2:3 type A-1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
M&L reinforced cement concrete nominal mix 1:1 1/2:3 type A-1 using 20mm graded stone aggregate as in beams, cantilivers, bressummers, intel over 1.5m span complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.
M & L reinforced cement concrete nominal Mix 1:2:4 type B-1 using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed.
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.
M&L for TMT bars Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory methopd using PU mould, laid in required colour pattern over and inclujding 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory methopd using PU mould, laid in required colour pattern over and inclujding 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-Charge.
Dismantling of tiles/stone slabs of any descriptioin or thickness, laid dry or laid dry and pointed in floors, aprons etc
M&L Pre-cast concrete type B1 1:2:4 (20 mm graded stone aggregate) as in kerb stone block set in cement mortar 1:6 complete all as specified and directed.
M&L for rubberised chequered cement concrete tiles (in any shade) 20cmx20cmx25mm thick, set, jointed and pointed with grey cement and pigment in floors over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth using extra cement complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for two coats of weather coat paint (apex) on new plastered surfaces of wall including preparatioin plastered surfaces complete all as specified and directed by Engr-in-Charge. (Make: asian, Durolex or equivalent)
M&L for two coats of weather coat paint (apex) on old plastered surfaces of wall including preparation plastered surfaces complete all as specified and as directed by Engr-in-Charge. (Make: asian, Durolex or equivalent)
M&L Preparing old painted surfaces of walls, pillars etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified as directed.
S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A, including taking down old steel gates.
Dismantling posts or struts (wood or steel or RCC) any section including taking out embedded portion and making good disturbed ground surfaces.
Dismantling of fencing wire mesh any type
Excavation in post holes (or similar holes each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 mtr and making good surface in soft/loose soil.
S&F MS angle Iron as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed.
S&F MS work conforming to Fe 310-O as in FI fillets for securing chain link fencing, angle iron horns, posts, etc cut to length bent to shape with necessary cuts, drilling holes etc all as specified.
Supply & Fixing chain link fencing of MS GI wire mesh, 3mm dia of GI wire mesh weight n. exc 4 kg/sqm up to into mattresses or cages lapped wired incl. staple etc complete all as specified.
Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/supports etc & straining bolt etc incl. provision of binding wire complete all as specified.
Supply only ms round bar 10mm dia conforming to Fe 290 Gde E-165 as line wire for chain link fencing. Note : Cutting to length, bent to shape required including binding with MS wire is included in item No. 37 here in before.
S&F mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 05 to 10mm all as specified and directed.
S&F in repair galvanised concerntina coil 610mm dia, 30mm wide strips, & 2.5mm dia core wire all as specified and directed.
S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).
M&L 450mm dia Reinforced concrete pipes, class NP2, laid and jointed on concrete bed, Jointing and testing complete with collars all as specified and directed
Dismantling AC/CGI (corrugated, semi corrugated etc), as in roof covering complete.
Dismantling unframed timber scantling 40 Sq cm and over in section, in any position complete all as specified.
S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. complete using any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
S&F MS work conforming to Fe 310-O as in FI fillets for securing roof sheeting etc cut to length bent to shape with necessary cuts, drilling holes etc all as specified.
S&F in repair Providing precast cement concrete as in louvres and jallies type B0 1:2:4 using 12.5mm stone aggregate, 25mm thick (measured solid), set in CM 1:4 complete all as per sample and as directed
M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated or semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.
Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.
Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.
M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1:6 mm MS boxes with 3 mm thick leminated sheet for mounting switches, sockets, fan regulators etc for the following complete all as specified and directed.
One light / fan point controlled by one switch
One bell point controlled by one bell Push
One 5 Amps socket outlet point controlled by one switch on same board with other switches.
One 5 Amps socket outlet point on independent board controlled by one switch.
~Ditto~ all as per Item No.190 above but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 1.5 Sq mm green PVC insulated cable for 15/16 Amps socket point on independent board controlled by one switch complete all as specified and directed.
M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non mettalic rigid pvc casing caping doublelock system and 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes 1.6mm thick with 3mm thick laminatedsheet for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.
One light / fan point controlled by one switch
One bell point controlled by one bell Push
One 5 Amps socket outlet point controlled by one switch on same board with other switches.
One 5 Amps socket outlet point controlled by one switch on independent board.
~Ditto~ all as per item No. 196 above but with 2.5 Sqmm cross sectional area electric cable for 15/16 Amps socket outlet point controlled by one switch on independent board complete all as specified and directed.
M & L for Point wiring in repairs with PVC insulated unsheathed electric FRLS cable 1100 volts grade, single core, having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in existing concealed conduit with 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs complete iincluding MS boxes 1.6mm thick with 3mm thick laminatedsheet for mounting switches sockets etc complete all as specified and directed. for the following.
One light / fan point controlled by one switch
One bell point controlled by one bell Push
One 5 Amps socket outlet point controlled by one switch on independent board.
~Ditto~ all as per item No. 202 above but with 2.5 Sqmm cross sectional area electric cable for 15/16 Amps socket outlet point controlled by one switch on independent board complete all as specified and directed.
Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.
Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.
Supply and fixing switch piano flush button single pole one way 15/16 Amp 240 volt complete all as specified and directed.
Supply and fixing socket outlet in repair flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.
Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.
Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
Supply and fixing batten/angular fittings complete all as specified and directed.
Supply & fixing in repair for electronic Fan regulator 450 watt step type complete all as specified and directed.
Supply and fixing in repair Bell multi music type AC 240 Volts,single pole complete all as specified and directed.
Supply and fixing in repair modular Switch 6 Amps single pole, one way complete all as specified and directed .
Supply and fixing in repair Modular Socket outlet, multi purpose, 5 Pin 6 Amps flush type complete all as specified and directed .
Supply and fixing in repair Modular Bell push flush type,6 Amps fixed complete all as specified and directed .
Supply and fixing in repair Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socket complete all as specified and directed .
Supply and fixing in repair Modular Switch 16 Amps single pole, one way complete all as specified and directed .
Supply and fixing in repair modular fan regulator 450 Watt of four step type complete all as specified and directed .
Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .
Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .
Supply and fixing double door SPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .
Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .
Supply and fixing MCB SPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .
Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .
Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .
M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.
All as peritem No 229.00 but with two single core 4.0 Sqmm size with 2.5 Sqmm cable as earth conductor complete.
M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.
Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells Cat No-REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/HPL/Crompton Greaves/Surya .
supply and fixing in repair LED tube rod 18 watt 230 volt T8 type complete with electric electronic driver and bipin holder including one No tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make : Havells Cat Part No. CRYSTAL1213T8DSTL20WLED865SGLASS or equivalent of Bajaj / Philips / Wipro / CG.
Supply and fixing in repair LED batten tube light fitting 1x 9 watt 230 volt wall/ ceiling mounted luminaire with polycarbonate hoiusing and integrated electronic driver with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make : Havells Cat Part No. LUMILINEBS9WLED865SPCWH or equivalent of Bajaj / Philips / CG.
Supply and fixing in repair Wall light fixture lantern made up of polycarbonate ; suitable for LED 9 watt ,compleate with LED 9 watt lamp, spiral B-22 base including connection with all necessary accessories complete all as specified and directed. MAKE : Havells Cat Part No. LHDLO2160099 or equivalent of Bajaj / Philips.
Supply and fixing in repair LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make : Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.
SINHA CONSTRUCTION
Vijay Bakshi and Son
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .